首頁 電池管理 IC 電池充電器 IC
首頁
電池管理 IC
電池充電器 IC

BQ25751

現行

具有電源路徑的獨立式或 I²C 控制、70V、降壓升壓、鉛酸電池充電控制器

立即訂購
產品規格表

BQ25751

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Number of series cells 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 Cell chemistry Lead Acid Charge current (max) (A) 20 Features Adjustable switching frequency, BAT temp thermistor monitoring (JEITA profile), Bidirectional, IC thermal regulation, ICO (Input Current Optimization), IINDPM (Input current limit), Input OVP, Integrated ADC, Integrated LDO, Power Path, SYNC Pin, USB C/PD compatible, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 4.2 Vin (max) (V) 70 Absolute max Vin (max) (V) 85 Control topology Switch-Mode Buck-boost Battery charge voltage (min) (V) 0 Battery charge voltage (max) (V) 70 Control interface I2C TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125
Rating Catalog Number of series cells 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 Cell chemistry Lead Acid Charge current (max) (A) 20 Features Adjustable switching frequency, BAT temp thermistor monitoring (JEITA profile), Bidirectional, IC thermal regulation, ICO (Input Current Optimization), IINDPM (Input current limit), Input OVP, Integrated ADC, Integrated LDO, Power Path, SYNC Pin, USB C/PD compatible, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 4.2 Vin (max) (V) 70 Absolute max Vin (max) (V) 85 Control topology Switch-Mode Buck-boost Battery charge voltage (min) (V) 0 Battery charge voltage (max) (V) 70 Control interface I2C TI functional safety category Functional Safety-Capable Operating temperature range (°C) -40 to 125
VQFN (RRV) 36 30 mm² 6 x 5
  • Wide input voltage operating range: 4.4V to 70V
  • Wide battery voltage operating range: up-to 70V
    • 6V up-to 48V lead-acid charging profile with bulk, absorb and float voltage charging phases
    • Charge voltage temperature compensation
  • Synchronous buck charge controller with NFET drivers
    • Adjustable switching frequency from 200kHz to 600kHz
    • Optional synchronization to external clock
    • Integrated loop compensation with soft start
    • Optional gate driver supply input for optimized efficiency
  • Bidirectional converter operation (Reverse Mode) supporting USB-PD Extended Power Range (EPR)
    • Adjustable input voltage (VAC) regulation from 3.3V to 65V with 20mV/step
    • Adjustable input current regulation (RAC_SNS) from 400mA to 20A with 50mA/step using 2mΩ resistor
  • Direct power path management for highest efficiency to power system
    • System power selection from adapter or battery
    • Dynamic power management
    • All N-channel FET drivers
  • High accuracy
    • ±0.5% charge voltage regulation
    • ±3% charge current regulation
    • ±3% input current regulation
  • I2C controlled for optimal system performance with resistor-programmable option
    • Hardware adjustable input and output current limits
  • Integrated 16-bit ADC for voltage, current, and temperature monitoring
  • Low battery quiescent current
  • High safety integration
    • Adjustable input overvoltage and undervoltage protection
    • Battery Overvoltage and overcurrent protection
    • Charging safety timer in CV Mode
    • Thermal shutdown
  • Status outputs
    • Adapter present status (PG)
    • Charger Operation status
  • Package
    • 36-pin 6mm × 5mm QFN
  • Wide input voltage operating range: 4.4V to 70V
  • Wide battery voltage operating range: up-to 70V
    • 6V up-to 48V lead-acid charging profile with bulk, absorb and float voltage charging phases
    • Charge voltage temperature compensation
  • Synchronous buck charge controller with NFET drivers
    • Adjustable switching frequency from 200kHz to 600kHz
    • Optional synchronization to external clock
    • Integrated loop compensation with soft start
    • Optional gate driver supply input for optimized efficiency
  • Bidirectional converter operation (Reverse Mode) supporting USB-PD Extended Power Range (EPR)
    • Adjustable input voltage (VAC) regulation from 3.3V to 65V with 20mV/step
    • Adjustable input current regulation (RAC_SNS) from 400mA to 20A with 50mA/step using 2mΩ resistor
  • Direct power path management for highest efficiency to power system
    • System power selection from adapter or battery
    • Dynamic power management
    • All N-channel FET drivers
  • High accuracy
    • ±0.5% charge voltage regulation
    • ±3% charge current regulation
    • ±3% input current regulation
  • I2C controlled for optimal system performance with resistor-programmable option
    • Hardware adjustable input and output current limits
  • Integrated 16-bit ADC for voltage, current, and temperature monitoring
  • Low battery quiescent current
  • High safety integration
    • Adjustable input overvoltage and undervoltage protection
    • Battery Overvoltage and overcurrent protection
    • Charging safety timer in CV Mode
    • Thermal shutdown
  • Status outputs
    • Adapter present status (PG)
    • Charger Operation status
  • Package
    • 36-pin 6mm × 5mm QFN

The BQ25751 is a wide input voltage, switched-mode buck-boost battery charge controller with direct power path control. The device offers high-efficiency battery charging over a wide voltage range with bulk, float and absorption charging for lead-acid batteries. The device integrates all the loop compensation for the buck-boost converter, thereby providing a high density solution with ease of use.

Besides the I2C host-controlled charging mode, the device also supports standalone charging mode via resistor programmable limits. Input current, charge current and charge voltage regulation targets can be set via the ILIM_HIZ, ICHG and FB pins, respectively.

The BQ25751 is a wide input voltage, switched-mode buck-boost battery charge controller with direct power path control. The device offers high-efficiency battery charging over a wide voltage range with bulk, float and absorption charging for lead-acid batteries. The device integrates all the loop compensation for the buck-boost converter, thereby providing a high density solution with ease of use.

Besides the I2C host-controlled charging mode, the device also supports standalone charging mode via resistor programmable limits. Input current, charge current and charge voltage regulation targets can be set via the ILIM_HIZ, ICHG and FB pins, respectively.
filter 尋找其它 電池充電器 IC
下載 觀看有字幕稿的影片 影片
索取更多資訊

在 NDA 下提供功能安全資訊，例如失效模式、影響和診斷分析 (FMEDA)、安全分析報告和安全手冊。立即索取

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet BQ25751: Standalone/I2C Controlled, 70V Bidirectional Buck-Boost Lead Acid Battery Charge Controller with Direct Power Path Control datasheet PDF | HTML 2024年 12月 8日
Application note How To Implement External P&O Feature On BQ2575X PDF | HTML 2025年 5月 16日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

BQ25751EVM — BQ25751 評估模組

BQ25751EVM 評估模組 (EVM) 是適用於 BQ25751 IC 的完整評估系統，BQ25756 IC 為降壓升壓電池充電控制器，具有 4.4V 至 70V 寬輸入範圍、最高 70V 的寬輸出電壓範圍和雙向功能。BQ25751EVM 的最大輸入與輸出為 55V，最大充電電流為 10A。
使用指南: PDF | HTML
TI.com 無法提供
驅動程式或資料庫

BQ25751-FS — BQ25751 functional safety FIT rate and pin FMA

BQ25751 functional safety FIT rate and pin FMA
支援產品和硬體

支援產品和硬體

產品
電池充電器 IC
BQ25751 — 具有電源路徑的獨立式或 I²C 控制、70V、降壓升壓、鉛酸電池充電控制器
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RRV) 36 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片