首頁 電源管理 電壓參考 分流電壓參考
首頁
電源管理
電壓參考
分流電壓參考

ATL432

現行

2.5V 精密可編程分流穩壓器

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
ATL432LI 現行 高頻寬、低 IQ 可編程分流穩壓器 (針腳配置：RKA) This pin-to-pin upgrade offers improved stability boundaries and lower reference input current to optimize voltage-output accuracy.
功能相同，但引腳輸出與所比較的裝置不同
TL432 現行 可調精密度分流穩壓器 (反向針腳配置) for cost optimized designs

ATL432

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog VO (V) 2.5 Initial accuracy (max) (%) 0.5, 1 Iz for regulation (min) (µA) 20 VO adj (min) (V) 2.5 VO adj (max) (V) 36 Reference voltage (V) adjustable Temp coeff (max) (ppm/°C) 92 Operating temperature range (°C) -40 to 125 Iout/Iz (max) (mA) 100
Rating Catalog VO (V) 2.5 Initial accuracy (max) (%) 0.5, 1 Iz for regulation (min) (µA) 20 VO adj (min) (V) 2.5 VO adj (max) (V) 36 Reference voltage (V) adjustable Temp coeff (max) (ppm/°C) 92 Operating temperature range (°C) -40 to 125 Iout/Iz (max) (mA) 100
SOT-23 (DBZ) 3 6.9204 mm² 2.92 x 2.37
  • Adjustable Regulated Output of 2.5V to 36V
  • Very-Low Operating Current
    • IKA(min) = 35µA (Maximum)
    • IREF = 150nA (Maximum)
  • Internally Compensated for Stability
    • Stable With No Capacitive Load
  • Reference Voltage Tolerances at 25°C
    • 0.5% for B Grade
    • 1% for A Grade
  • Typical Temperature Drift
    • 5mV (–40°C to +85°C); I Version
    • 6mV (–40°C to +125°C); Q Version
  • Extended Cathode Current Range 35µA to 100mA
  • Low Output Impedance of 0.3Ω (Maximum)
  • Adjustable Regulated Output of 2.5V to 36V
  • Very-Low Operating Current
    • IKA(min) = 35µA (Maximum)
    • IREF = 150nA (Maximum)
  • Internally Compensated for Stability
    • Stable With No Capacitive Load
  • Reference Voltage Tolerances at 25°C
    • 0.5% for B Grade
    • 1% for A Grade
  • Typical Temperature Drift
    • 5mV (–40°C to +85°C); I Version
    • 6mV (–40°C to +125°C); Q Version
  • Extended Cathode Current Range 35µA to 100mA
  • Low Output Impedance of 0.3Ω (Maximum)

The ATL431 and ATL432 are three-terminal adjustable shunt regulators, with specified thermal stability over applicable automotive, commercial, and industrial temperature ranges. The output voltage can be set to any value between Vref (approximately 2.5V) and 36V, with two external resistors. These devices have a typical output impedance of 0.05Ω. Active output circuitry provides a very sharp turn-on characteristic, making these devices excellent replacements for Zener diodes in many applications, such as onboard regulation, adjustable power supplies, and switching power supplies.

The ATL43x has > 20x improvement cathode current range over its TL43x predecessor. It also is stable with a wider range of load capacitance types and values.

ATL431 and ATL432 are the exact same parts but with different pinouts and order numbers. The ATL43x is offered in two grades, with initial tolerances (at 25°C) of 0.5%, 1%, for the B and A grade, respectively. In addition, low output drift vs temperature ensures consistent voltage regulation over the entire temperature range.

The ATL43xxI devices are characterized for operation from –40°C to +85°C, and the ATL43xxQ devices are characterized for operation from –40°C to +125°C.

The ATL431 and ATL432 are three-terminal adjustable shunt regulators, with specified thermal stability over applicable automotive, commercial, and industrial temperature ranges. The output voltage can be set to any value between Vref (approximately 2.5V) and 36V, with two external resistors. These devices have a typical output impedance of 0.05Ω. Active output circuitry provides a very sharp turn-on characteristic, making these devices excellent replacements for Zener diodes in many applications, such as onboard regulation, adjustable power supplies, and switching power supplies.

The ATL43x has > 20x improvement cathode current range over its TL43x predecessor. It also is stable with a wider range of load capacitance types and values.

ATL431 and ATL432 are the exact same parts but with different pinouts and order numbers. The ATL43x is offered in two grades, with initial tolerances (at 25°C) of 0.5%, 1%, for the B and A grade, respectively. In addition, low output drift vs temperature ensures consistent voltage regulation over the entire temperature range.

The ATL43xxI devices are characterized for operation from –40°C to +85°C, and the ATL43xxQ devices are characterized for operation from –40°C to +125°C.
filter 尋找其它 分流電壓參考
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
TLA432 現行 具有 RKA 接腳配置的所有電容器穩定精密可編程參考 Improved to all load cap stability, improved temperature drift

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 6
重要文件 類型 標題 格式選項 日期
* Data sheet ATL43x 2.5V Low Iq Adjustable Precision Shunt Regulator datasheet (Rev. E) PDF | HTML 2024年 12月 4日
E-book Tips and tricks for designing with voltage references (Rev. A) 2021年 5月 7日
Application note Using the TL431 for Undervoltage and Overvoltage Detection (Rev. A) 2019年 12月 11日
Selection guide 431 Device Nomenclature (Rev. B) 2019年 9月 18日
E-book Voltage Supervisor and Reset ICs: Tips, Tricks and Basics 2019年 6月 28日
Technical article Designing for isolated DC/DC converter shunt safety PDF | HTML 2015年 8月 29日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ATL431EVM-001 — ATL431 可調整分流穩壓器評估模組

ATL431EVM-001 評估模組 (EVM) 展示 ATL431 的功能與可調整性，讓您可使用各種電阻值對陰極電壓編程。您也可以使用與電源串聯的各種電阻來設定陰極電流。除了 EVM 上提供的電阻器外，您還可以將電阻焊接至電路板上，以根據您的應用自訂電路板。此 EVM 讓您可以透過跳線在陽極與陰極之間應用超過 12 個輸出電容，藉此檢查 ATL431 的穩定性。此 EVM 也相容於採用 SOT23-3 封裝的 TL431、TL431LI、ATL431LI、LM431 與 TLVH432 產品。

使用指南: PDF
TI.com 無法提供
模擬型號

ATL432A PSpice Transient Model (Rev. B)

SLVMAT2B.ZIP (59 KB) - PSpice Model
下載
模擬型號

ATL432A Unencrypted PSpice Transient Model

SLVMBN9.ZIP (1 KB) - PSpice Model
下載
模擬型號

ATL432B PSpice Transient Model (Rev. B)

SLVMAT1B.ZIP (59 KB) - PSpice Model
下載
模擬型號

ATL432B Unencrypted PSpice Transient Model

SLVMBN8.ZIP (1 KB) - PSpice Model
下載
計算工具

SHUNT-REFERENCE-CALC — Shunt Reference Selector and Design Calculator

This tool guides the user through the design process for the TLx431 and LM40x0 family of shunt voltage references. This calculator will recommend resistance and capacitance values to optimally meet the user's desired specifications.
支援產品和硬體

支援產品和硬體
啟動
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-23 (DBZ) 3 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片