홈 전력 관리 DC/DC 전력 모듈 절연 전원 모듈(일체형 변압기)
홈
전력 관리
DC/DC 전력 모듈
절연 전원 모듈(일체형 변압기)
신규

UCC35341-Q1

미리 보기

통합 변압기를 지원하는 차량용, 2W, 5.5V~20V VIN, 조정 5kVRMS 절연 DC-DC 모듈

지금 주문하기
데이터 시트

UCC35341-Q1

미리 보기
데이터 시트 지금 주문하기

제품 상세 정보

Rating Automotive Topology Full-bridge Vin (max) (V) 20 Vin (min) (V) 8 Vout (max) (V) 25 Vout (min) (V) 15 Features 2W, Dual output, Enable, Power good, Regulated, Reinforced isolation, Soft start, UVLO adjustable Device type Isolated modules Regulated outputs (#) 2 TI functional safety category Functional Safety-Capable Isolation rating Reinforced Output power (W) 2 Operating temperature range (°C) -40 to 125 Control mode Internally Regulated with Dual Adjustable Outputs
Rating Automotive Topology Full-bridge Vin (max) (V) 20 Vin (min) (V) 8 Vout (max) (V) 25 Vout (min) (V) 15 Features 2W, Dual output, Enable, Power good, Regulated, Reinforced isolation, Soft start, UVLO adjustable Device type Isolated modules Regulated outputs (#) 2 TI functional safety category Functional Safety-Capable Isolation rating Reinforced Output power (W) 2 Operating temperature range (°C) -40 to 125 Control mode Internally Regulated with Dual Adjustable Outputs
SO-MOD (DHA) 16 60.255 mm² (5.85 mm × 10.3 mm)
  • Fully integrated high-density isolated DC/DC module with isolation planar transformer
  • Wide input range: 8V to 28V (with 22V OVLO)
    • ≥ 2W typical output for 11V ≤ VVIN ≤ 17V, VVDD-COM = 18V, at TA ≤ 85°C
    • ≥ 1.5W typical output for 10V ≤ VVIN ≤ 20V, 15V ≤ VVDD-COM < 20V, at TA ≤ 85°C
  • Programmable (VDD – COM) output voltage
    • 15V to 20V, ≤ ±1.5% total regulation accuracy
  • Programmable (VEE – COM) output voltage
    • -2V to -8V, ≤ ±5% total regulation accuracy
  • Adaptive spread spectrum modulation (SSM)
  • Strong magnetic and radiated field immunities
  • Reduced inrush current soft-start
  • ENA pin for logic enable and programming input UVLO
  • Open-drain Power-Good for fault indicator
  • Integrated protections: UVLO, OVLO, short-circuit, OVP, UVP, and thermal shutdown.
  • < 3pF isolation capacitance
  • Static and dynamic CMTI > ±250kV/µs
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1:–40°C ≤ TA ≤ 125°C
  • Safety-related certifications (Planned):
    • Reinforced isolation per DIN EN IEC 60747-17 (VDE 0884-17)
    • UL 1577 / CSA component recognition program
  • 16-pin, wide body SOIC package
  • Fully integrated high-density isolated DC/DC module with isolation planar transformer
  • Wide input range: 8V to 28V (with 22V OVLO)
    • ≥ 2W typical output for 11V ≤ VVIN ≤ 17V, VVDD-COM = 18V, at TA ≤ 85°C
    • ≥ 1.5W typical output for 10V ≤ VVIN ≤ 20V, 15V ≤ VVDD-COM < 20V, at TA ≤ 85°C
  • Programmable (VDD – COM) output voltage
    • 15V to 20V, ≤ ±1.5% total regulation accuracy
  • Programmable (VEE – COM) output voltage
    • -2V to -8V, ≤ ±5% total regulation accuracy
  • Adaptive spread spectrum modulation (SSM)
  • Strong magnetic and radiated field immunities
  • Reduced inrush current soft-start
  • ENA pin for logic enable and programming input UVLO
  • Open-drain Power-Good for fault indicator
  • Integrated protections: UVLO, OVLO, short-circuit, OVP, UVP, and thermal shutdown.
  • < 3pF isolation capacitance
  • Static and dynamic CMTI > ±250kV/µs
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1:–40°C ≤ TA ≤ 125°C
  • Safety-related certifications (Planned):
    • Reinforced isolation per DIN EN IEC 60747-17 (VDE 0884-17)
    • UL 1577 / CSA component recognition program
  • 16-pin, wide body SOIC package

The UCC35341-Q1 is an automotive qualified high isolation voltage DC/DC power module designed to provide power to SiC and IGBT isolated gate drivers. Its proprietary integrated transformer, flip-chip package, and advanced control architectures achieve high power density, low noise, and lowest system BOM. This device is capable of delivering 2W typical output power at 85oC ambient temperature. The highly accurate dual-output voltages, easily set by resistor dividers, enable low on-resistance, fast and reliable switching for SiC/IGBT. The low-latency feedback control reduces the output capacitance for fast load transient and supports dynamic voltage programming. The wide input voltage and adjustable VIN UVLO supports both wide battery voltage of electric vehicles and regulated input rails. It is operational from 8V to 20V VIN, and can withstand VIN overvoltage transients up to 28V.

The integrated protection features, fault-report Power-Good pin, and enable function increase system robustness and save external components. The SOIC package with 8.2mm creepage and clearance distance ensures high isolation capability.

The UCC35341-Q1 is an automotive qualified high isolation voltage DC/DC power module designed to provide power to SiC and IGBT isolated gate drivers. Its proprietary integrated transformer, flip-chip package, and advanced control architectures achieve high power density, low noise, and lowest system BOM. This device is capable of delivering 2W typical output power at 85oC ambient temperature. The highly accurate dual-output voltages, easily set by resistor dividers, enable low on-resistance, fast and reliable switching for SiC/IGBT. The low-latency feedback control reduces the output capacitance for fast load transient and supports dynamic voltage programming. The wide input voltage and adjustable VIN UVLO supports both wide battery voltage of electric vehicles and regulated input rails. It is operational from 8V to 20V VIN, and can withstand VIN overvoltage transients up to 28V.

The integrated protection features, fault-report Power-Good pin, and enable function increase system robustness and save external components. The SOIC package with 8.2mm creepage and clearance distance ensures high isolation capability.
filter 기타 절연 전원 모듈(일체형 변압기) 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
2개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 UCC35341-Q1 Automotive 2 W, 12 V VIN , 25 V VOUT , High-Density, > 5kVRMS , Isolated DC/DC Module datasheet PDF | HTML 2026. 3. 10
인증서 UCC34141EVM-116 EU RoHS Declaration of Conformity (DoC) PDF | HTML 2024. 9. 27

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

UCC34141EVM-116 — UCC34141 평가 모듈

이 평가 모듈(EVM)은 UCC34141-Q1 1.5W 바이어스 모듈의 드롭인, 핀 대 핀 호환, 2W 변형 제품인 UCC35341-Q1을 지원합니다. UCC34141EVM-116 EVM은 5.5VIN~20VIN에서 작동하며 VDD = 18V 및 VEE = -5V의 이중 출력으로 구성되어 있습니다.
사용 설명서: PDF | HTML
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
SO-MOD (DHA) 16 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상