이 제품의 최신 버전이 있습니다
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.
UCC27524A-Q1
- Qualified for automotive applications
- AEC-Q100 qualified with the
following results
- Device temperature grade 1
- Industry-standard pin out
- Two independent gate-drive channels
- 5A peak source and sink-drive current
- Independent enable function for each output
- TTL and CMOS-compatible logic threshold independent of supply voltage
- Hysteretic-logic thresholds for high-noise immunity
- Ability to handle negative voltages (–5V) at inputs
- Inputs and enable pin-voltage levels not restricted by VDD pin bias supply voltage
- 4.5V to 18V single-supply range
- Outputs held low during VDD-UVLO, (ensures glitch-free operation at power-up and power-down)
- Fast propagation delays (17ns typical)
- Fast rise and fall times (6ns and 10ns typical)
- 1ns typical delay matching between 2-channels
- Ability to parallel two outputs for high-drive current
- Outputs held in low when inputs are floating
- SOIC-8 and VSSOP-8 PowerPad™ package options
- Operating temperature range of –40°C to 150°C
The UCC27524A-Q1 device is a dual-channel, high-speed, low-side, gate-driver device capable of effectively driving MOSFET and IGBT power switches. The UCC27524A-Q1 device is a variant of the UCC2752x family. The UCC27524A-Q1 device adds the ability to handle –5V directly at the input pins for increased robustness. The UCC27524A-Q1 device is a dual, non-inverting driver. Using a design that inherently minimizes shoot-through current, the UCC27524A-Q1 device is capable of delivering high-peak current pulses of up to 5A source and 5A sink into capacitive loads along with rail-to-rail drive capability and extremely small propagation delay (typically 17ns). In addition, the drivers feature matched, internal-propagation delays between the two channels which are very well suited for applications requiring dual-gate drives with critical timing, such as synchronous rectifiers. This also enables connecting two channels in parallel to effectively increase current-drive capability or driving two switches in parallel with a single input signal. The input pin thresholds are based on TTL and CMOS compatible low-voltage logic, which is fixed and independent of the VDD supply voltage. Wide hysteresis between the high and low thresholds offers excellent noise immunity.
For protection purposes, internal pull-up and pull-down resistors on the input pins of the UCC27524A-Q1 device ensure that outputs are held LOW when input pins are in floating condition. The UCC27524A-Q1 device features enable pins (ENA and ENB) to have better control of the operation of the driver applications. The pins are internally pulled up to VDD for active-high logic and are left open for standard operation.
The UCC27524A-Q1 devices is available in SOIC-8 (D) and VSSOP-PowerPAD-8 with exposed pad (DGN) packages.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
UCC27423-4-5-Q1EVM — UCC2742xQ1 활성화를 지원하는 듀얼 4A 고속 저압측 MOSFET 드라이버 평가 모듈(EVM)
SLURB22 — UCC2752X Schematic Review Template
TIDM-02009 — ASIL D 안전 개념 평가 고속 트랙션, 양방향 DC/DC 변환 레퍼런스 설계
이 레퍼런스 설계는 단일 TMS320F28388D 실시간 C2000™ MCU를 통해 HEV/EV 트랙션 인버터 및 양방향 DC-DC 컨버터를 제어하는 방법을 보여줍니다. 트랙션 컨트롤은 소프트웨어 기반의 리졸버-디지털 컨버터(RDC)를 사용하여 모터를 최대 20,000RPM의 고속으로 구동합니다. DC-DC 컨버터는 위상 전환 풀 브리지(PSFB) 토폴로지 및 동기 정류(SR) 스키마와 함께 PCMC(피크 전류 모드 제어) 기술을 사용합니다. 트랙션 인버터 스테이지는 UCC5870-Q1 스마트 게이트 드라이버로 구동되는 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| HVSSOP (DGN) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.