홈 전력 관리 DC/DC 전력 모듈 벅 모듈(통합 인덕터)
홈
전력 관리
DC/DC 전력 모듈
벅 모듈(통합 인덕터)

TPSM63606

활성

5mm x 5.5mm 향상된 HotRod™ QFN의 고밀도 36V 입력, 1V~16V 출력, 6A 전원 모듈

지금 주문하기
데이터 시트

TPSM63606

활성
데이터 시트 지금 주문하기

제품 상세 정보

Rating Catalog Topology Buck, Inverting Buck-Boost, Synchronous Buck Iout (max) (A) 6 Vin (max) (V) 36 Vin (min) (V) 3 Vout (max) (V) 16 Vout (min) (V) 1 Features EMI Tested, Enable, Frequency synchronization, Overcurrent protection, Power good, Spread Spectrum EMI features Integrated capacitors, Low parasitic Hotrod packaging, Spread Spectrum Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Type Module Duty cycle (max) (%) 98 Control mode current mode Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200
Rating Catalog Topology Buck, Inverting Buck-Boost, Synchronous Buck Iout (max) (A) 6 Vin (max) (V) 36 Vin (min) (V) 3 Vout (max) (V) 16 Vout (min) (V) 1 Features EMI Tested, Enable, Frequency synchronization, Overcurrent protection, Power good, Spread Spectrum EMI features Integrated capacitors, Low parasitic Hotrod packaging, Spread Spectrum Operating temperature range (°C) -40 to 125 TI functional safety category Functional Safety-Capable Type Module Duty cycle (max) (%) 98 Control mode current mode Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200
B3QFN (RDL) 20 27.5 mm² (5.5 mm × 5 mm)
  • Functional Safety-Capable
  • Versatile 36-VIN, 6-AOUT synchronous buck module
    • Integrated MOSFETs, inductor, and controller
    • Adjustable output voltage from 1 V to 16 V
    • 5.0-mm × 5.5-mm × 4-mm overmolded package
    • –40°C to 125°C junction temperature range
    • Frequency adjustable from 200 kHz to 2.2 MHz
    • Negative output voltage capability
  • Ultra-high efficiency across the full load range
    • 95%+ peak efficiency
    • External bias option for improved efficiency
    • Shutdown quiescent current of 0.6 µA (typical)
  • Ultra-low conducted and radiated EMI signatures
    • Low-noise package with dual input paths and integrated capacitors reduces switch ringing
    • Spread-spectrum modulation (S suffix)
    • Resistor-adjustable switch-node slew rate
    • Meets CISPR 11 and 32 class B emissions
  • Suitable for scalable power supplies
    • Pin compatible with the TPSM63604 (36 V, 4 A)
  • Inherent protection features for robust design
    • Precision enable input and open-drain PGOOD indicator for sequencing, control, and VIN UVLO
    • Overcurrent and thermal shutdown protections
  • Create a custom design using the TPSM63606 with the WEBENCH Power Designer
  • Functional Safety-Capable
  • Versatile 36-VIN, 6-AOUT synchronous buck module
    • Integrated MOSFETs, inductor, and controller
    • Adjustable output voltage from 1 V to 16 V
    • 5.0-mm × 5.5-mm × 4-mm overmolded package
    • –40°C to 125°C junction temperature range
    • Frequency adjustable from 200 kHz to 2.2 MHz
    • Negative output voltage capability
  • Ultra-high efficiency across the full load range
    • 95%+ peak efficiency
    • External bias option for improved efficiency
    • Shutdown quiescent current of 0.6 µA (typical)
  • Ultra-low conducted and radiated EMI signatures
    • Low-noise package with dual input paths and integrated capacitors reduces switch ringing
    • Spread-spectrum modulation (S suffix)
    • Resistor-adjustable switch-node slew rate
    • Meets CISPR 11 and 32 class B emissions
  • Suitable for scalable power supplies
    • Pin compatible with the TPSM63604 (36 V, 4 A)
  • Inherent protection features for robust design
    • Precision enable input and open-drain PGOOD indicator for sequencing, control, and VIN UVLO
    • Overcurrent and thermal shutdown protections
  • Create a custom design using the TPSM63606 with the WEBENCH Power Designer

Deriving from a family of synchronous buck modules, the TPSM63606 is a highly integrated 36-V, 6-A DC/DC solution that combines power MOSFETs, a shielded inductor, and passives in an Enhanced HotRod™ QFN package. The module has VIN and VOUT pins located at the corners of the package for optimized input and output capacitor placement. Four larger thermal pads beneath the module enable a simple layout and easy handling in manufacturing.

With an output voltage from 1 V to 16 V, the TPSM63606 is designed to quickly and easily implement a low-EMI design in a small PCB footprint. The total solution requires as few as four external components and eliminates the magnetics and compensation part selection from the design process.

Although designed for small size and simplicity in space-constrained applications, the TPSM63606 module offers many features for robust performance: precision enable with hysteresis for adjustable input-voltage UVLO, resistor-programmable switch node slew rate and spread spectrum option for improved EMI, integrated VCC, bootstrap, and input capacitors for increased reliability and higher density, constant switching frequency over the full load current range, and a PGOOD indicator for sequencing, fault protection, and output voltage monitoring.

Deriving from a family of synchronous buck modules, the TPSM63606 is a highly integrated 36-V, 6-A DC/DC solution that combines power MOSFETs, a shielded inductor, and passives in an Enhanced HotRod™ QFN package. The module has VIN and VOUT pins located at the corners of the package for optimized input and output capacitor placement. Four larger thermal pads beneath the module enable a simple layout and easy handling in manufacturing.

With an output voltage from 1 V to 16 V, the TPSM63606 is designed to quickly and easily implement a low-EMI design in a small PCB footprint. The total solution requires as few as four external components and eliminates the magnetics and compensation part selection from the design process.

Although designed for small size and simplicity in space-constrained applications, the TPSM63606 module offers many features for robust performance: precision enable with hysteresis for adjustable input-voltage UVLO, resistor-programmable switch node slew rate and spread spectrum option for improved EMI, integrated VCC, bootstrap, and input capacitors for increased reliability and higher density, constant switching frequency over the full load current range, and a PGOOD indicator for sequencing, fault protection, and output voltage monitoring.
filter 기타 벅 모듈(통합 인덕터) 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.
TPSM63606E 활성 55°C의 확장된 온도 범위를 지원하는 고밀도, 36V 입력, 1V~16V 출력, 6A 전원 모듈 Same functionality and pinout, but has more extensive qualifications to withstand extended cold temperature range: -55°C to 125°C.
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
TPSM63608 활성 7.5mm x 6.5mm HotRod™ QFN의 고밀도 36V 입력, 1V~20V 출력, 6A 전원 모듈 Performance features with larger package
TPSM64406 활성 고밀도, 36V, 0.8V~16V 출력, 듀얼 3A 출력 전원 모듈 Dual-output 3A device configurable for 6A single output

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
7개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 TPSM63606 High-Density, 3-V to 36-V Input, 1-V to 16-V Output, 6-A Synchronous Buck DC/DC Power Module With Enhanced HotRod™ QFN Package datasheet (Rev. B) PDF | HTML 2022. 4. 25
애플리케이션 노트 Soldering Considerations for Power Modules (Rev. C) PDF | HTML 2024. 3. 14
애플리케이션 노트 How to Implement a Simple Constant Current Regulation Scheme to a PCM Based Buck PDF | HTML 2023. 8. 16
기능 안전 정보 TPSM63606 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 2022. 2. 18
인증서 TPSM63606SEVM EU RoHS Declaration of Conformity (DoC) 2021. 10. 26
사용 설명서 TPSM63606EVM and TPSM63606SEVM Evaluation Module User’s Guide PDF | HTML 2021. 9. 29
인증서 TPSM63606EVM EU RoHS Declaration of Conformity (DoC) 2021. 9. 2

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPSM63606EVM — TPSM63606 평가 보드 3V~36V 입력, 1V~16V, 6A 출력, 전원 모듈

TPSM63606EVM 및 TPSM63606SEVM 고밀도 평가 모듈(EVM)은 TPSM63606 36V, 6A 동기식 벅 DC/DC 벅 전원 모듈의 성능을 보여줄 수 있도록 설계되었습니다. 이러한 EVM은 3V~36V의 넓은 입력 전압 범위에서 작동하여 1% 이상의 설정값 정확도와 최대 6A 출력 전류를 가진 고정 5V 출력을 제공합니다. EVM의 "S" 버전에는 낮은 EMI를 위한 의사 랜덤 확산 스펙트럼(PRSS)이 포함되어 있습니다. 전원 모듈은 향상된 EMI 성능, 고효율 및 고신뢰성을 갖춘 고급 패키지 및 핀아웃 (...)
지원되는 제품 및 하드웨어
시뮬레이션 모델

TPSM63606 PSpice Transient Model

SLVMDQ6.ZIP (387 KB) - PSpice 모델
지원되는 제품 및 하드웨어
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
B3QFN (RDL) 20 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

비디오 시리즈

모든 비디오 보기

동영상