TPS65313-Q1
- AEC-Q100 qualified for automotive
applications:
- Device temp grade 1:-40°C to +125°C, T A
- Supports system-level functional safety requirements up to ASIL-C (ISO 26262) and SIL-2 (IEC 61508)
- Synchronous buck preregulator
(BUCK1)
- Input voltage range from 4 V to 36 V
- Output currents up to 3.1 A
- Factory-selectable output voltage: 3.3 V or 3.6 V
- Synchronous buck regulator
(BUCK2)
- Fixed input voltage: 3.3 V or 3.6 V
- Output currents up to 2 A
- Factory-selectable output voltage: 1.2 V, 1.25 V, 1.8 V, or 2.3 V
- Synchronous boost converter
(BOOST)
- Fixed input voltage of 3.3 V or 3.6 V
- Output currents up to 600 mA
- Output voltage of 5 V
- Phase-locked loop (PLL)
- Output frequency around 2.2 MHz
- Supports modulated or unmodulated external clock at SYNC_IN pin
- For all regulators
- Soft-start feature
- Independent voltage monitoring with diagnostics
- Overcurrent, overload , overvoltage, undervoltage, and thermal protection
- Internal loop compensation
- Integrated adaptively randomized spread spectrum (ARSS) modulation for regulator switching clock
- 3-µA quiescent current in the OFF state
- SPI for control and diagnostics
- Two general-purpose external-voltage monitors
- Integrated Q&A watchdog and reset supervisor for MCU or DSP
- Thermally enhanced 40-Pin VQFNP package with 0.5-mm pitch
The TPS65313-Q1 device is a power management IC (PMIC) that meets the requirements of MCU-controlled or DSP-controlled automotive, industrial, machinery, or transportation systems. With the integration of commonly used features, the device helps reduce board space and system cost.
The device includes one wide-VIN synchronous buck regulator (BUCK1) combined with one low-voltage (LV) buck regulator (BUCK2) and one boost converter (BOOST), which are powered from the wide-VIN buck regulator (BUCK1). The device features a low quiescent current in the OFF state to reduce current consumption in case the system is permanently connected to the supply. All outputs are protected against overvoltage, overload, and overtemperature conditions.
추가 정보
기능 안전 정보 및 기타 정보를 사용할 수 있습니다. 지금 요청
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS65313-Q1Wide-VIN Power-Management IC for Automotive Applications datasheet (Rev. C) | PDF | HTML | 2023. 9. 13 | |
| * | 사용 설명서 | TPS65313-Q1 Technical Reference Manual | 2020. 3. 5 | ||
| 애플리케이션 노트 | TPS65313-Q1 and TPS65653-Q1 LDO free power solution for AWR1642/AWR1843 | 2020. 1. 27 | |||
| 애플리케이션 노트 | TPS65313-Q1 CISPR-25 EMC Measurement Report | 2018. 3. 21 |
설계 및 개발
전원 공급 솔루션
TPS65313-Q1을 포함하는 솔루션을 살펴보세요. TI는 칩(SoC), 프로세서, 마이크로컨트롤러, 센서 또는 FPGA(Field Programmable Gate Array)의 TI와 비TI 시스템을 위한 전원 공급 솔루션을 제공합니다.
TPS65313-EVM — TPS65313-Q1 고전압 전원 관리 IC 평가 모듈
TIPA-050050 — TPS65313-Q1 PMIC를 사용하는 AWR1843 및 AWR1642 전원 공급 장치 설계
이 전원 공급 장치 설계는 AWR1843 및 AWR1642 레이더 센서에 전원을 공급하는 최적화된 전력 관리 IC(PMIC)를 설명합니다. 이 기술 레퍼런스 매뉴얼은 TPS65313-Q1의 기본적으로 프로그래밍된 EEPROM 구성을 위한 레퍼런스로 사용됩니다. 이 문서는 TPS65313-Q1 PMIC 및 AWR18x/16x 레이더 장치와의 일반적인 연결을 보여줍니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFNP (RWG) | 40 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.