TPS62824
- Available as an integrated-inductor power module: TPSM82821, TPSM82822, and TPSM82823
- DCS-Control topology
- 1% feedback or output voltage accuracy (full temperature range)
- Up to 97% efficiency
- 26mΩ and 25mΩ internal power MOSFETs
- 2.4V to 5.5V input voltage range
- 4µA operating quiescent current
- 2.2MHz switching frequency
- 0.6V to 4V adjustable output voltage
- Power save mode for light load efficiency
- 100% duty cycle for lowest dropout
- Active output discharge
- Power-good output
- Thermal shutdown protection
- Hiccup short-circuit protection
- A forced-PWM version for CCM operation
- Create a custom design using the TPS6282x with the WEBENCH Power Designer
The TPS6282x is an easy-to-use, synchronous step-down DC/DC converters family with a very low quiescent current of only 4µA. Based on the DCS-Control topology, the device provides a fast transient response. The internal reference allows to regulate the output voltage down to 0.6V with a high feedback voltage accuracy of 1% over the junction temperature range of –40°C to 125°C. The family devices are pin-to-pin and BOM-to-BOM compatible. The entire design requires a small 470nH inductor, a single 4.7µF input capacitor, and two 10µF or single 22µF output capacitor.
The TPS6282x is available in two flavors. The first includes an automatically entered power save mode to maintain high efficiency down to very light loads for extending the system battery run-time. The second runs in forced-PWM maintaining a continuous conduction mode to make sure of the least ripple in the output voltage and a quasi-fixed switching frequency. The device features a Power-Good signal and an internal soft-start circuit. The device is able to operate in 100% mode. For fault protection, the device incorporates a HICCUP short-circuit protection as well as a thermal shutdown. The device is available in a 6-pin 1.5mm × 1.5mm QFN package, offering the highest power density design.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | TPS6282x 2.4V to 5.5V Input, 1, 2, 3, 4A Step-Down Converter With 1% Output Accuracy datasheet (Rev. I) | PDF | HTML | 2024. 3. 11 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS62825EVM-794 — 1%의 출력 정확도를 지원하는 1.5mm x 1.5mm QFN 패키지, 2A 스텝다운 컨버터 평가 모듈
TPS62825EVM-794 EVM(평가 모듈)은 사용자가 TPS62825 DCS 제어 스텝다운 벅 컨버터의 작동과 기능을 쉽게 평가하고 테스트할 수 있도록 설계되었습니다. 이 EVM은 최대 솔루션 높이가 1mm이고 최대 2A의 출력 전류에서 2.4V~5.5V 입력 전압을 1% 정확도의 1.8V 조정 출력 전압으로 변환합니다. TPS62825는 소형 1.5 x 1.5mm² QFN 패키지로 제공되며, SSD(솔리드 스테이트 드라이브), 컴퓨팅, 공장 자동화 등의 모든 장비 유형에 있는 POL(Point-of-Load) 컨버터를 위한 (...)
TIPA-050009 — DDR4를 지원하는 AM62x 개별 전원 공급 솔루션
이 전원 공급 장치 설계는 저비용 개별 전압 레귤레이터를 사용하는 AM62x 프로세서의 전력 트리를 설명하고 AM62x의 다양한 전압 레일에 대한 특정 전력 업/다운 시퀀싱 요구 사항을 자세히 설명합니다.
AM62x는 임베디드 3D 그래픽 가속, 듀얼 디스플레이 인터페이스 및 광범위한 주변 기기 및 네트워킹 옵션을 갖춘 이종 Arm® 프로세서의 Sitara™ 산업용 등급 제품군을 확장합니다. 저렴한 AM62x Sitara 프로세서는 고객이 시스템 설계 복잡성과 비용을 절감할 수 있도록 지원합니다. AM62x는 산업용 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSON-HR (DMQ) | 6 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.