전력 관리 전원 보호 스위치 및 컨트롤러 eFuse(통합 핫 스왑)

TPS25940-Q1

활성

전류 모니터 및 배터리 단락 보호를 지원하는 2.7V~18V, 42mΩ, 0.6~5.3A 오토모티브 eFuse

제품 상세 정보

Vabsmax_cont (V) 20 Vin (max) (V) 18 Vin (min) (V) 2.7 Current limit (max) (A) 5.3 Current limit (min) (A) 0.6 Features Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Power good signal, Reverse current blocking always, Short-circuit protection, Thermal shutdown Overcurrent response Current limiting Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 42 Overvoltage response Cut-off Rating Automotive Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.00014 Quiescent current (Iq) (max) (A) 0.00027 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
Vabsmax_cont (V) 20 Vin (max) (V) 18 Vin (min) (V) 2.7 Current limit (max) (A) 5.3 Current limit (min) (A) 0.6 Features Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Power good signal, Reverse current blocking always, Short-circuit protection, Thermal shutdown Overcurrent response Current limiting Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 42 Overvoltage response Cut-off Rating Automotive Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.00014 Quiescent current (Iq) (max) (A) 0.00027 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
WQFN (RVC) 20 12 mm² (4 mm × 3 mm)
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD Classification Level 2
    • Device CDM ESD Classification Level C5
  • 2.7-V to 18-V operating voltage, 20 V (maximum)
  • Total RON: 42 mΩ (typical)
  • 0.6-A to 5.3-A adjustable current limit (±8%)
  • IMON Current indicator output
    • ±8% accuracy for TPS25940-Q1/TPS25940L-Q1
  • Adjustable under-, overvoltage threshold (±2%)
  • Reverse current blocking
  • 1-µs reverse voltage shutoff
  • Programmable dVo/dt control
  • Power good and fault outputs
  • Short-to-battery protection
  • Short-to-ground protection
  • TPS25940-Q1/TPS259401A-Q1: auto-retry
  • TPS25940L-Q1: latch-off
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD Classification Level 2
    • Device CDM ESD Classification Level C5
  • 2.7-V to 18-V operating voltage, 20 V (maximum)
  • Total RON: 42 mΩ (typical)
  • 0.6-A to 5.3-A adjustable current limit (±8%)
  • IMON Current indicator output
    • ±8% accuracy for TPS25940-Q1/TPS25940L-Q1
  • Adjustable under-, overvoltage threshold (±2%)
  • Reverse current blocking
  • 1-µs reverse voltage shutoff
  • Programmable dVo/dt control
  • Power good and fault outputs
  • Short-to-battery protection
  • Short-to-ground protection
  • TPS25940-Q1/TPS259401A-Q1: auto-retry
  • TPS25940L-Q1: latch-off

The TPS25940xx-Q1 eFuse Power Switches are compact, feature rich power management devices with a full suite of protection functions. The wide operating range allows control of many popular DC bus voltages. Integrated back-to-back FETs provide bidirectional current control making the device well suited for systems with load side holdup energy that must not drain back to a failed supply bus.

Load, source and device protection are provided with many programmable features including overcurrent, dVo/dt ramp and overvoltage, undervoltage thresholds. For system status monitoring and downstream load control, the device provides PGOOD, FLT and precise current monitor output. Precise programmable undervoltage, overvoltage thresholds and mode simplify power management design.

The TPS25940xx-Q1 monitor V(IN) and V(OUT) to provide true reverse current blocking when V(IN) < (V(OUT) – 66 mV). This function supports supply bus protection from over-voltages during output short to battery faults.

The TPS25940xx-Q1 eFuse Power Switches are compact, feature rich power management devices with a full suite of protection functions. The wide operating range allows control of many popular DC bus voltages. Integrated back-to-back FETs provide bidirectional current control making the device well suited for systems with load side holdup energy that must not drain back to a failed supply bus.

Load, source and device protection are provided with many programmable features including overcurrent, dVo/dt ramp and overvoltage, undervoltage thresholds. For system status monitoring and downstream load control, the device provides PGOOD, FLT and precise current monitor output. Precise programmable undervoltage, overvoltage thresholds and mode simplify power management design.

The TPS25940xx-Q1 monitor V(IN) and V(OUT) to provide true reverse current blocking when V(IN) < (V(OUT) – 66 mV). This function supports supply bus protection from over-voltages during output short to battery faults.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
6개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 TPS25940xx-Q1 2.7-V to 18-V eFuse with Integrated Short-to-Battery Protection datasheet (Rev. E) PDF | HTML 2021. 1. 29
기능 안전 정보 eFuse: Safety Certification and why it Matters 2020. 3. 18
e북 11 Ways to Protect Your Power Path 2019. 7. 3
애플리케이션 노트 Basics of eFuses (Rev. A) 2018. 4. 5
애플리케이션 노트 Charging Super Capacitor With eFuse 2017. 8. 8
애플리케이션 노트 Power Multiplexing Using Load Switches and eFuses (Rev. A) 2017. 6. 20

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS25940EVM-635 — TPS25940x 평가 모듈

The TPS25940XEVM-635 is an eFuse (Current Limiter with DEVSLP) that operates from 2.7V to 18V, and have integrated back-to-back FETs with programmable under-voltage, over-voltage, reverse-voltage, over-current and in-rush current protection. It also includes analog current monitoring in a small (...)

사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
시뮬레이션 모델

TPS25940-Q1 Unencrypted PSpice Transient Model Package (Rev. B)

SLVMBN6B.ZIP (78 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

TPS25940L-Q1 PSpice Transient Model

SLVMCQ3.ZIP (84 KB) - PSpice 모델
지원되는 제품 및 하드웨어
계산 툴

SLVC571 — TPS2594x Design Calculation Tool

지원되는 제품 및 하드웨어
계산 툴

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
지원되는 제품 및 하드웨어
레퍼런스 디자인

PMP30046 — 엔터프라이즈 SSD 백업 전원 레퍼런스 디자인

PMP30046 레퍼런스 설계는 엔터프라이즈 SSD 백업 전원 공급 장치를 위한 시스템 솔루션을 보여줍니다. 핫 스왑 컨트롤러의 입력 전압은 5V 또는 12V일 수 있습니다. 벅 단계는 이 입력 전압을 3.3V로 변환하며 최대 부하 전류는 2.5A입니다. 3.3V는 백업 커패시터를 충전하기 위해 28V로 부스트됩니다. 전원 장애 발생 시 다른 벅 스테이지가 백업 커패시터에 저장된 에너지를 사용하여 최대 부하 전류가 2.5A인 5V를 입력 레일에 공급합니다.
지원되는 제품 및 하드웨어
레퍼런스 디자인

TIDA-01413 — 두 개의 4Gbps 쿼드 디시리얼라이저를 갖춘 ADAS 8채널 센서 퓨전 허브 레퍼런스 설계

이 센서 퓨전 허브 레퍼런스 설계를 이용하면 동축 케이블을 통해 최대 4대의 2메가픽셀 카메라와 최대 4개의 레이더 모듈을 연결할 수 있습니다. 이 설계에서는 이러한 동축 케이블을 사용하여 센서에 전원, 백 채널 통신 및 클록 동기화를 제공합니다. 두 개의 4Gbps FPD-Link III 쿼드 디시리얼라이저는 Samtec 커넥터를 통해 애플리케이션 프로세서까지 MIPI(모바일 산업 프로세서 인터페이스) CSI-2(카메라 직렬 인터페이스-2)의 듀얼 출력을 지원합니다.
지원되는 제품 및 하드웨어
레퍼런스 디자인

TIDA-01514 — 안테나 모듈을 위한 보호 및 경부하 감지 레퍼런스 설계

TIDA-01514 레퍼런스 디자인은 오토모티브 인포테인먼트 및 내비게이션 시스템에서 사용되는 안테나 모듈을 위한 보호 및 진단 기능을 제공합니다. 이 디자인은 낮은 저항의 강하(IR)를 달성하면서 단락, 배터리 단락, 역전류 및 과전압 보호와 같은 필요한 보호 조치를 충족하기 위한 안테나 저손실 선형 레귤레이터(LDO)를 위한 대체 솔루션입니다. 또한 이 디자인은 정밀한 경부하 및 과부하 감지와 같은 서브시스템 수준의 진단 요구 사항을 충족합니다.

지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
WQFN (RVC) 20 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상