SN75LVPE3410

활성

PCIe® 3.0 8-Gbps 4채널 선형 리드라이버

제품 상세 정보

Type Redriver Protocols CXL, PCI/PCIe, PCIe, PCIe1, PCIe2, PCIe3 Applications Backplane, CXL, PCIE, PCIe, SAS, SATA Number of channels 4 Speed (max) (Gbpp) 8 Rating Catalog Operating temperature range (°C) 0 to 70
Type Redriver Protocols CXL, PCI/PCIe, PCIe, PCIe1, PCIe2, PCIe3 Applications Backplane, CXL, PCIE, PCIe, SAS, SATA Number of channels 4 Speed (max) (Gbpp) 8 Rating Catalog Operating temperature range (°C) 0 to 70
WQFN (RNQ) 40 24 mm² (6 mm × 4 mm)
  • Quad-channel linear equalizer supporting PCIe 1.0/2.0/3.0 up to 8 Gbps interfaces
  • CTLE boosts up to 12 dB at 4 GHz helps to extend channel reach
  • Ultra-low latency of 70 ps
  • Excellent return loss of -17 dB at 4 GHz
  • Low additive random jitter of 60 fs (typical) with PRBS data
  • Single 3.3-V supply
  • Internal voltage regulator provides immunity to supply noise
  • Low active power of 124 mW/channel
  • No heat sink required
  • Pin-strap or SMBus programming
  • Support for x2, x4, x8, x16 PCIe bus width with one or multiple SN75LVPE3410
  • Automatic receiver detection for PCIe use cases
  • Protocol agnostic linear redriver allows seamless support for PCIe link training
  • Commercial temperature range of 0°C to 70°C
  • 4.0 mm × 6.0 mm, 40 pin WQFN package
  • Quad-channel linear equalizer supporting PCIe 1.0/2.0/3.0 up to 8 Gbps interfaces
  • CTLE boosts up to 12 dB at 4 GHz helps to extend channel reach
  • Ultra-low latency of 70 ps
  • Excellent return loss of -17 dB at 4 GHz
  • Low additive random jitter of 60 fs (typical) with PRBS data
  • Single 3.3-V supply
  • Internal voltage regulator provides immunity to supply noise
  • Low active power of 124 mW/channel
  • No heat sink required
  • Pin-strap or SMBus programming
  • Support for x2, x4, x8, x16 PCIe bus width with one or multiple SN75LVPE3410
  • Automatic receiver detection for PCIe use cases
  • Protocol agnostic linear redriver allows seamless support for PCIe link training
  • Commercial temperature range of 0°C to 70°C
  • 4.0 mm × 6.0 mm, 40 pin WQFN package

The SN75LVPE3410 is a four channel low-power high-performance linear repeater or redriver designed to support PCI Express (PCIe™) Generation 1.0, 2.0 and 3.0.

The SN75LVPE3410 receivers deploy continuous time linear equalizers (CTLE) to provide a programmable high-frequency boost. The equalizer can open an input eye that is completely closed due to inter-symbol interference (ISI) induced by an interconnect medium, such as PCB traces. The CTLE receiver is followed by a linear output driver. The linear datapaths of SN75LVPE3410 preserve transmit preset signal characteristics. The linear redriver becomes part of the passive channel that as a whole get link trained for best transmit and receive equalization settings. This transparency in the link training protocol result in best electrical link and lowest possible latency. The programmable equalization of the device along with its linear datapaths maximizes the flexibility of physical placement within the interconnect channel and improves overall channel performance.

The programmable settings can be applied easily through software (SMBus or I 2C) or by using pin control.

The SN75LVPE3410 is a four channel low-power high-performance linear repeater or redriver designed to support PCI Express (PCIe™) Generation 1.0, 2.0 and 3.0.

The SN75LVPE3410 receivers deploy continuous time linear equalizers (CTLE) to provide a programmable high-frequency boost. The equalizer can open an input eye that is completely closed due to inter-symbol interference (ISI) induced by an interconnect medium, such as PCB traces. The CTLE receiver is followed by a linear output driver. The linear datapaths of SN75LVPE3410 preserve transmit preset signal characteristics. The linear redriver becomes part of the passive channel that as a whole get link trained for best transmit and receive equalization settings. This transparency in the link training protocol result in best electrical link and lowest possible latency. The programmable equalization of the device along with its linear datapaths maximizes the flexibility of physical placement within the interconnect channel and improves overall channel performance.

The programmable settings can be applied easily through software (SMBus or I 2C) or by using pin control.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
2개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 SN75LVPE3410 Quad-Channel PCI-Express 3.0 Linear Redriver datasheet PDF | HTML 2023. 6. 1
사용 설명서 SN75LVPE3410 Programming Guide PDF | HTML 2023. 4. 11

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

DS160PR410EVM-RSC — 쿼드 채널 PCI-Express 4세대 선형 리드라이버 평가 모듈(EVM)

DS160PR410EVM-RSC 평가 모듈(EVM)은 텍사스 인스트루먼트 DS160PR410 PCI-Express 선형 리드라이버의 신호 컨디셔닝 기능을 평가하기 위한 완전한 고대역폭 플랫폼을 제공합니다. PCIe 4.0 16x 버스의 전송 거리를 확장할 수 있는 DS160PR410 장치 8개를 갖추고 있습니다. 이 보드는 표준 규정 준수 테스트, 성능 평가 및 초기 시스템 프로토타이핑에 활용할 수 있습니다.
사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
평가 모듈(EVM)용 GUI

SIGCONARCHITECT3 — Texas Instruments SigCon Architect EVM GUI v3.0.0.14 Setup

Texas Instruments SigCon Architect EVM GUI v3.0.0.14 Setup
지원되는 제품 및 하드웨어
평가 모듈(EVM)용 GUI

SIGCONARCHITECT3-WRTE — Texas Instruments SigCon Architect EVM GUI v3 Setup with RTE

Texas Instruments SigCon Architect EVM GUI v3 Setup with RTE
지원되는 제품 및 하드웨어
지원 소프트웨어

SIGCONARCHITECT — SigCon Architect v2.0.0.8

SigCon Architect v2.0.0.8
지원되는 제품 및 하드웨어
지원 소프트웨어

SIGCONARCHITECT-REPEATER-PROFILES — SigCon Architect Repeater Profiles v1.1

지원되는 제품 및 하드웨어
지원 소프트웨어

SIGCONARCHITECT-RETIMER-PROFILES — SigCon Architect Retimer Profiles v1.3

지원되는 제품 및 하드웨어
지원 소프트웨어

SIGCONARCHITECT-WRTE — SigCon Architect With RTE v2.0.0.8

지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
WQFN (RNQ) 40 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상