PGA855
- Eight pin-programmable binary gains
- G (V/V) = ⅛, ¼, ½, 1, 2, 4, 8, and 16
- Low gain error drift: 1 ppm/°C (max) at G = 1 V/V
- Fully differential outputs
- Independent output power-supply pins to allow for ADC input overdrive protection
- Output common-mode control
- Faster signal processing:
- Wide bandwidth: 10 MHz at all gains
- High slew rate: 35 V/µs
- Settling time: 500 ns to 0.01%, 950 ns to 0.0015%
- Input stage noise: 7.8 nV/√ Hz at G = 16 V/V
- Filter option to achieve better SNR
- Input overvoltage protection to ±40 V beyond supplies
- Input-stage supply range:
- Single supply: 8 V to 36 V
- Dual supply: ±4 V to ±18 V
- Output-stage supply range:
- Single supply: 4.5 V to 36 V
- Dual supply: ±2.25 V to ±18 V
- Specified temperature range: –40°C to +125°C
- Small package: 3-mm × 3-mm VQFN
The PGA855 is a high-bandwidth programmable gain instrumentation amplifier with fully differential outputs. The PGA855 is equipped with eight binary gain settings, from an attenuating gain of 0.125 V/V to a maximum of 16 V/V, using three digital gain selection pins. The output common-mode voltage can be independently set using the VOCM pin.
The PGA855 architecture is optimized to drive inputs of high-resolution, precision analog-to-digital converters (ADCs) with sampling rates up to 1 MSPS without the need for an additional ADC driver. The output-stage power supplies (LVSS/LVDD) are decoupled from the input stage and can be connected to power supplies of the ADC to protect the ADC or downstream device against overdrive damage.
The super-beta input transistors offer an impressively low input bias current, which in turn provides a very low input current noise density of 0.3 pA/√ Hz, making the PGA855 a versatile choice for virtually any sensor type. The low-noise current-feedback front-end architecture offers excellent gain flatness, even at high frequencies, making the PGA855 an excellent high-impedance sensor readout device. Integrated protection circuitry on the input pins handles overvoltages up to ±40 V beyond the power-supply voltages.
관심 가지실만한 유사 제품
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | PGA855 Low-Noise, Wide-Bandwidth, Fully Differential Output Programmable-Gain Instrumentation Amplifier datasheet (Rev. B) | PDF | HTML | 2023. 9. 27 | |
| 애플리케이션 노트 | Anti-Alias Filter Design for a 100kHz Bandwidth Data Acquisition Signal Chain (Rev. A) | PDF | HTML | 2025. 2. 27 | ||
| Application brief | Using TI ADCs for Noise, Vibration, and Harshness Measurements | PDF | HTML | 2024. 12. 3 | ||
| Product overview | PGA855 and PGA849 Product Overview (Rev. A) | PDF | HTML | 2024. 7. 11 | ||
| 애플리케이션 노트 | Achieve High SNR with the PGA855, Fully Differential Programmable-Gain Amplifier | PDF | HTML | 2024. 3. 21 | ||
| Product overview | PLC Analog Input Front-End Architectures | PDF | HTML | 2022. 7. 31 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PGA855EVM — 완전 차동 출력 프로그래머블 게인 계측 증폭기용 PGA855 평가 모듈
PGA855 평가 모듈(EVM)은 차동 출력을 지원하는 고정밀 프로그래머블 게인 증폭기인 PGA855를 평가하기 위한 개발 플랫폼입니다. PGA855는 완전 차동 입력을 사용하여 고성능 ADC(아날로그-디지털 컨버터)의 입력을 구동하는 데 최적화되었습니다.
PGA85X-INPUT-OUTPUT-RANGE-DESIGN-CALC — PGA85x input and output range design calculator
TIDA-010945 — 통합, 저드리프트 정밀 디지털 멀티미터 및 데이터 수집 신호 체인 레퍼런스 설계
이 레퍼런스 설계는 DC 측정을 위한 고성능 신호 체인의 이론, 설계 및 테스트를 설명합니다. 주 대상 애플리케이션은 디지털 멀티미터(DMM)이지만, 데이터 수집(DAQ) 및 상태 모니터링 등의 다른 애플리케이션에도 적용할 수 있습니다. 이 설계는 고성능 24비트 아날로그-디지털 컨버터, ADS127L21 및 저잡음 프로그래머블 게인 증폭기 PGA855를 사용하여 높은 DC 정확도를 달성하며 ±2.4ppm의 일반적인 비선형성과 온도 드리프트가 낮습니다. 이러한 디바이스는 고집적도로 전체 신호 체인 설계를 간소화합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGT) | 16 | Ultra Librarian |