PGA849
- Differential to single-ended conversion
- Eight pin-programmable binary gains
- G (V/V) = ⅛, ¼, ½, 1, 2, 4, 8, and 16
- Low gain error drift: ±2ppm/°C (maximum)
- Faster signal processing:
- Wide bandwidth: 10MHz at all gains
- High slew rate: 35V/µs at G ≥ ½ V/V
- Settling time: 700ns to 0.01%, 950ns to 0.0015%
- Input stage noise: 8.6nV/√Hz at G = 16V/V
- Filter option to achieve better SNR
- Input overvoltage protection to ±40V beyond supplies
- Input-stage supply range:
- Single supply: 8V to 36V
- Dual supply: ±4V to ±18V
- Independent output power-supply pins
- Output-stage supply range:
- Single supply: 4.5V to 36V
- Dual supply: ±2.25V to ±18V
- Specified temperature range: –40°C to +125°C
- Small package: 3mm × 3mm QFN
The PGA849 is a wide-bandwidth, low-noise programmable gain instrumentation amplifier for differential-to-single-ended conversion. The PGA849 is equipped with eight binary gain settings, from an attenuating gain of 0.125V/V to a maximum of 16V/V, using three digital gain selection pins.
The PGA849 architecture is optimized to drive inputs of high-resolution, precision analog-to-digital converters (ADCs) with sampling rates up to 1MSPS without the need for an additional ADC driver. The output-stage power supplies are decoupled from the input stage to protect the ADC or downstream devices against overdrive damage.
The super-beta input transistors offer an impressively low input bias current, which in turn provides a very low input current noise density of 0.3pA/√Hz, making the PGA849 a versatile choice for virtually any sensor type. The low-noise current-feedback front-end architecture offers exceptional gain flatness even at high frequencies, making the PGA849 an excellent high-impedance sensor readout device. Integrated protection circuitry on the input pins handles overvoltages of up to ±40V beyond the power-supply voltages.
관심 가지실만한 유사 제품
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | PGA849 Low-Noise, Wide-Bandwidth, Precision Programmable Gain Instrumentation Amplifier datasheet (Rev. A) | PDF | HTML | 2024. 12. 12 | |
| Product overview | PGA855 and PGA849 Product Overview (Rev. A) | PDF | HTML | 2024. 7. 11 | ||
| 애플리케이션 노트 | Achieve High SNR with the PGA855, Fully Differential Programmable-Gain Amplifier | PDF | HTML | 2024. 3. 21 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PGA849EVM — PGA849 평가 모듈
PGA849-CALC — PGA849 입력 및 출력 범위 계산기
TIDA-010945 — 통합, 저드리프트 정밀 디지털 멀티미터 및 데이터 수집 신호 체인 레퍼런스 설계
이 레퍼런스 설계는 DC 측정을 위한 고성능 신호 체인의 이론, 설계 및 테스트를 설명합니다. 주 대상 애플리케이션은 디지털 멀티미터(DMM)이지만, 데이터 수집(DAQ) 및 상태 모니터링 등의 다른 애플리케이션에도 적용할 수 있습니다. 이 설계는 고성능 24비트 아날로그-디지털 컨버터, ADS127L21 및 저잡음 프로그래머블 게인 증폭기 PGA855를 사용하여 높은 DC 정확도를 달성하며 ±2.4ppm의 일반적인 비선형성과 온도 드리프트가 낮습니다. 이러한 디바이스는 고집적도로 전체 신호 체인 설계를 간소화합니다.
TIDA-010962 — ATE(자동 테스트 장비) 80V 개별 부동 VI 레퍼런스 설계
이 레퍼런스 설계는 4사분면 개별 부동 전압 및 전류(VI) 설계를 나타낸 것입니다. 전압 출력은 ±40V 및 0V~80V 범위를 지원하며, 전류 범위는 500mA, 10mA, 10μA의 세 가지입니다. 이 설계는 아날로그 피드백 루프를 지원하며 FV(강제 전압), FI(강제 전류), 버퍼, 갱 모드에서 작동합니다. 이 레퍼런스 설계는 20비트 강제 DAC(디지털-아날로그 컨버터), 18비트, 2채널 ADC(아날로그-디지털 컨버터) 및 정밀 신호 체인을 사용해 보정 후 제어 측정에 0.01%의 정확도를 달성합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGT) | 16 | Ultra Librarian |