HzAll trademarks are the property of their respective owners.
The OPA2614 offers very low 1.8nVHz input noise in a wideband, high gain bandwidth, voltage-feedback architecture. Intended for xDSL driver applications, the
OPA2614 also supports this low input noise with exceptionally low harmonic distortion, particularly in differential configurations. Adequate output current is provided to drive the potentially heavy load of a twisted-pair line. Harmonic distortion for a 2VPP differential output operating from +5V to +12V supplies is ≤ –80dBc
through 1MHz input frequencies. Operating on a low 6.0mA/ch supply current, the OPA2614 can satisfy most xDSL driver requirements over a wide range of possible supply voltage–from a single +5 condition, to ±5V, on up to a single +12V design.
General-purpose applications on a single +5V supply will benefit from the high input and output voltage swing available on this reduced supply voltage. Baseband I/Q receiver channels can achieve almost perfect channel match with noise and distortion to support signals through 5MHz with > 14-bit dynamic range.
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | Dual, High Gain Bandwidth, High Output Current, Op Amp with Current Limit datasheet (Rev. D) | 2008/08/28 | |
| Technical article | 3 common questions when designing with high-speed amplifiers | PDF | HTML | 2020/07/17 | |
| E-book | The Signal e-book: A compendium of blog posts on op amp design topics | 2017/03/28 | ||
| Application note | RLC Filter Design for ADC Interface Applications (Rev. A) | 2015/05/13 | ||
| User guide | DEM-OPA-SO-2A User's Guide (Rev. B) | 2010/04/30 | ||
| Application note | Noise Analysis for High Speed Op Amps (Rev. A) | 2005/01/17 | ||
| Application note | ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC Drivers | 2004/04/22 | ||
| Application note | Measuring Board Parasitics in High-Speed Analog Design | 2003/07/07 | ||
| Application note | Active Output Impedance for ADSL Line Drivers | 2002/11/26 |
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
The DEM-OPA-SO-2A demonstration evaluation module helps designers evaluate the operation and performance of TI dual-channel, high-speed, wideband operational amplifiers. This unpopulated printed-circuit board (PCB) is compatible with products offered in the 8-lead SOIC (D) package.
For more (...)
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
Analog Engineer's Calc Installer
General calculator tool for analog design support.