MCF8329A
- Three-phase BLDC gate driver with integrated sensorless motor control algorithm
- Code-free single shunt Field Oriented Control
- Supports up to 1.8 kHz (electrical frequency)
- Support flux weakening control
- Forward and reverse windmilling support
- Analog, PWM, freq., or I 2C based control input
- Configurable motor startup and stop options
- Optional closed-loop speed or power or current control or modulation index control
- 5-point configurable reference profile support
- Anti-voltage surge prevents overvoltage
- Improved acoustic performance with automatic dead time compensation
- Support maximum torque per ampere (MTPA)
- Offline motor back EMF measurement
- Variable monitoring through DACOUT
- 65-V Three-phase gate driver
- Drives 3 high-side and 3 low-side N-Channel MOSFETs, 4.5 to 60-V operating voltage
- Supports 100% PWM duty cycle
- Bootstrap-based gate driver architecture
- 1-A/2-A Maximum peak source/sink current
- Integrated current sense amplifier
- Adjustable gain (5, 10, 20, 40 V/V)
- Low-power sleep mode
- 5-µA (maximum) at V PVDD = 24-V, T A = 25°C
- Speed loop accuracy: < 3% with internal clock
- Configurable non-volatile memory (EEPROM) to store device configuration
- Supports up to 75-kHz PWM frequency for low inductance motor support
- Accurate LDO (AVDD) 3.3-V ±3%, 50-mA support with AVDD connected to VREG
- Independent driver shutdown path (DRVOFF)
- Spread spectrum for EMI mitigation
- A suite of integrated protection features
- Supply under-voltage lockout (UVLO)
- Motor lock detection (3 different types)
- Over-current protection (OCP)
- Thermal shutdown (TSD)
- Fault condition indication pin (nFAULT)
- Optional fault diagnostics over I 2C interface
The MCF8329A provides a single-chip, code-free sensorless FOC solution for applications driving brushless-DC motors (BLDC) or Permanent Magnet Synchronous motor (PMSM). The MCF8329A provides three half-bridge gate drivers, each capable of driving high-side and low-side N-channel power MOSFETs. The device generates the correct gate drive voltages using an internal charge pump and enhances the high-side MOSFETs using a bootstrap circuit. A trickle charge pump is included to support a 100% duty cycle. The MCF8329A can operate from a single power supply and supports a wide input supply range of 4.5 to 60 V.
The algorithm configuration can be stored in non-volatile EEPROM, which allows the device to operate stand-alone once it has been configured. Motor current is sensed using an integrated current-sensing amplifier supporting a single external shunt resistor. MCF8329A integrates a large number of protection features, intended to protect the device, motor, and system against fault events.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | MCF8329A Sensorless Field Oriented Control (FOC)Three-phase BLDC Gate Driver datasheet | PDF | HTML | 2023. 11. 28 | |
| 애플리케이션 노트 | Getting Started with MOTORSTUDIO (Rev. A) | PDF | HTML | 2026. 6. 9 | ||
| 애플리케이션 노트 | MCF83xx - Open Loop to Closed Loop Handoff Tuning | PDF | HTML | 2025. 4. 15 | ||
| 애플리케이션 노트 | How to Program I2C for MCx83xx Device Family | PDF | HTML | 2025. 3. 24 | ||
| 애플리케이션 노트 | Motor Pre-Startup Tuning for MCx83xx | PDF | HTML | 2025. 3. 24 | ||
| 애플리케이션 노트 | MCF83xx and MCT83xx EEPROM Read and Write Procedure | PDF | HTML | 2025. 3. 13 | ||
| 사용 설명서 | MCF8329A Tuning Guide | PDF | HTML | 2024. 11. 5 | ||
| Product overview | Cordless Vacuum Cleaner BLDC Motor Efficiency Test Data vs Competitor F | PDF | HTML | 2024. 10. 21 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
MCF8329EVM — 60-V, 무센서 FOC 3상 BLDC 게이트 드라이버용 MCF8329 평가 모듈
MCF8329 평가 모듈(EVM)은 MCF8329A 개발을 위한 플랫폼으로, 모터 드라이브 애플리케이션을 위한 코드 없는 무센서 FOC(자속 기준 제어)를 지원하는 4.5V~60V, 3상 브러시리스 DC 게이트 드라이버입니다. 장치는 각각 고압측과 저압측 N-채널 전원 MOSFET를 구동하는 기능을 가진 하프 브리지 게이트 드라이버 3개를 제공합니다.
이 장치는 내부 충전 펌프를 사용하여 올바른 게이트 드라이브 전압을 생성하고, 부트스트랩 회로를 사용하여 고압측 MOSFET을 향상시킵니다. 100% 듀티 사이클을 지원하기 위해 (...)
MOTORSTUDIO — Motor Studio GUI for tuning and evaluating BLDC motor drivers
Motor Studio는 브러시리스 DC(BLDC) 모터 드라이버의 튜닝 프로세스를 단순화하고 장치 평가 및 제품 개발 시간을 줄여주는 간편한 그래픽 사용자 인터페이스(GUI)입니다. GUI는 사용자가 빠르게 모터를 회전시키고 다양한 모터 작동 단계를 최적화하여 최고의 모터 성능, 안정적인 모터 시동 및 최소 잡음을 달성할 수 있게 해줍니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (REE) | 36 | Ultra Librarian |