LP8764-Q1
- AEC-Q100 Qualified with the
following results:
- Input voltage: 2.8 V to 5.5 V
- Device temperature grade 1: –40°C to +125°C ambient operating temperature range
- Device HBM ESD classification Level 2
- Device CDM ESD classification Level C4B
- Functional Safety-Compliant
- Developed for functional safety applications
- Documentation available to aid ISO 26262 system design up to ASIL-D
- Documentation available to aid IEC 61508 system design up to SIL-3
- Systematic capability up to ASIL-D
- Hardware integrity up to ASIL-D
- Windowed voltage and over-current monitors
- Watchdog with selectable trigger / Q&A mode
- Level or PWM error signal monitoring (ESM)
- Thermal monitoring with high temperature warning and thermal shutdown
- Bit-integrity (CRC) error detection on configuration registers and non-volatile memory
- 4 high-efficiency step-down DC/DC
converters:
- Output voltage: 0.3 V to 3.34 V (0.3 V to 1.9 V for multi-phase outputs)
- Maximum output current: 5 A per phase, up to 20 A with 4-phase configuration
- Programmable output voltage slew-rate: 0.5 mV/µs to 33 mV/µs
- Switching frequency: 2.2 MHz or 4.4 MHz
- 10 configurable general purpose I/O (GPIO)
- SPMI interface for multi-PMIC synchronization
- Input overvoltage monitor (OVP) and undervoltage lockout (UVLO)
.
.
The LP8764-Q1 device is designed to meet the power management requirements of the latest processors and platforms in various safety-relevant automotive and industrial applications. The device has four step-down DC/DC converter cores, that are configurable for five different phase configurations from one 4-phase output to four 1-phase outputs. The device settings can be changed by I2C-compatible serial interface or by a SPI serial interface.
The automatic PFM/PWM (AUTO mode) operation together with the automatic phase adding and phase shedding maximizes efficiency over a wide output-current range. The LP8764-Q1 device supports remote differential voltage sensing for multiphase outputs to compensate IR drop between the regulator output and the point-of-load (POL) that improves the accuracy of the output voltage. The switching clock can be forced to PWM mode and the phases are interleaved. The switching can be synchronized to an external clock and spread-spectrum mode can be enabled to minimize the disturbances.
샘플 및 추가 정보 요청
전체 데이터시트 및 기타 정보가 제공됩니다. 지금 요청
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | LP8764-Q1 Four-Phase, 20-A Buck Converter With Integrated Switches datasheet | PDF | HTML | 2024. 11. 22 | ||
| * | 정오표 | LP8764-Q1 Silicon Revision 2.0 Errata | PDF | HTML | 2022. 2. 24 | ||
| 애플리케이션 노트 | Scalable PMIC NVM Update Guide (Rev. A) | PDF | HTML | 2023. 4. 28 | |||
| 사용 설명서 | Powering DRA821 with TPS6594-Q1 and LP8764-Q1 (Rev. A) | PDF | HTML | 2022. 9. 12 | |||
| 사용 설명서 | TPS65941120-Q1, TPS65941421Q1 and LP876411B5Q1 PMIC User Guide for J7AEP PDN0A | PDF | HTML | 2022. 8. 18 | |||
| 사용 설명서 | Scalable PMIC's GUI User’s Guide (Rev. B) | PDF | HTML | 2022. 6. 27 | |||
| 인증서 | LP8764Q1EVM-SKT EU RoHS Declaration of Conformity (DoC) | 2022. 6. 6 | ||||
| 사용 설명서 | TPS65941213-Q1 and LP876411B4-Q1 PMIC User Guide for J721E, PDN-1A | PDF | HTML | 2022. 2. 2 | |||
| 기능 안전 정보 | Leverage Jacinto 7 Processors Functional Safety Features for Automotive Designs (Rev. A) | PDF | HTML | 2021. 10. 13 |
설계 및 개발
전원 공급 솔루션
LP8764-Q1을 포함하는 솔루션을 살펴보세요. TI는 칩(SoC), 프로세서, 마이크로컨트롤러, 센서 또는 FPGA(Field Programmable Gate Array)의 TI와 비TI 시스템을 위한 전원 공급 솔루션을 제공합니다.
J7200XSOMXEVM — DRA821 시스템 온 모듈
The J7200XSOMG01EVM system-on-module—when paired with the J721EXCP01EVM common processor board—lets you evaluate the DRA821 processor for networking applications throughout automotive and industrial markets. These processors perform particularly well in industrial and automotive gateway (...)
LP87644Q1EVM — LP87644-Q1 4출력 벅 컨버터용 평가 모듈
CONGA-3P-STDA4 — 듀얼 Arm Cortex-A72 C7x DSP, GPU가 포함된 TDA4VM SoC용 Congatec STDA4 SMARC 시스템 온 모듈
Congatec의 STDA4 SMARC 모듈은 TDA4VM 애플리케이션 프로세서 및 DRA829J 네트워킹 프로세서를 기반으로 합니다.
이 모듈은 듀얼 Arm® Cortex®-A72, DSP 및 딥 러닝(NPU) 및 멀티미디어(GPU), Arm® Cortex® -R5F MCU로 실시간 통신 및 안전 기능의 부담을 덜기 위해 설계되었습니다. 이 모듈은 혹독한 환경용 애플리케이션과 -40°C ~ +85°C의 산업용 온도 범위에서 높은 안정성을 위해 설계되었습니다.
다양한 제품 변형을 사용하면 LPDDR4 RAM 및 eMMC 5.1 (...)
SCALABLE-PMIC-GUI — TPS6594x, TPS6593x 및 LP876x 확장 가능 PMIC의 평가 및 구성용 GUI
PEET-GUI — TPS6594-Q1, LP8756-Q1, LP8758, LP8770 및 TPS650330-Q1용 효율성 예측 툴
TIPA-020007 — AMD® Versal™ AI 에지 시리즈 2세대용 전원 공급 개념 검증 설계
이 개념 검증 전원 설계는 2VE3858 장치에 필요한 전원 레일을 TI 레귤레이터 IC를 통해 공급하는 방법을 보여줍니다. 이 설계 방법론은 통합 전원 레일 최소화를 위한 AMD® 표준에 부합합니다. 사용 가능한 모든 전원 통합 옵션은 AMD PDM(Power Design Manager) 툴 페이지를 참조하세요. 모든 애플리케이션에서 전원 추정을 할 때는 구현된 PDM을 사용해야 합니다.
TIPA-050033 — 차량용 애플리케이션용 TPS6594-Q1 PMIC를 사용하는 DRA821 프로세서 전원 공급 장치 설계
이 전원 공급 장치 설계는 DRA821 프로세서에 전원을 공급하기 위해 최적화된 전력 관리 IC(PMIC)를 설명합니다. 사용 설명서에서는 TPS6594-Q1 PMIC를 사용하는 DRA821 프로세서의 전원 설계 고려 사항을 설명합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN-HR (RQK) | 32 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.