LMH1218
- Supports ST-2082 (Proposed), ST-2081 (Proposed), SMPTE 424M, 344M, 292M, 259M, DVB-ASI, SFF-8431 (SFP+) and 10GbE Ethernet for SMPTE 2022-5/6
- Locks to Rates 11.88 Gbps, 5.94 Gbps, 2.97 Gbps, 1.485 Gbps, or Divided by 1.001 Sub-Rates, DVB-ASI (270 Mbps) and 10GbE (10.3125 Gbps)
- Reference-Free Operation With Fast Lock Time Covering All Supported or Selected Data Rates
- 75-Ω and 100-Ω Transmitter Outputs
- Integrated 2:1 Mux Input, 1:2 Demux/Fanout Outputs
- Automatic Slew Rate Based on Input Rate Detect
- On-Chip Eye Monitor
- Low 300-mW Power Consumption With Automatic Power Down on Loss of Input Signal
- Programmable Through SPI or SMBus Interface
- Single 2.5-V Supply Operation
- Small 4-mm × 4-mm 24-Pin WQFN Package
- –40°C to +85°C Operating Temperature Range
The LMH1218 device is a low-power cable driver with integrated reclocker to drive serial video data compatible to SMPTE-SDI, SMPTE 2022-5/6, 10GbE Ethernet, and DVB-ASI standards. The LMH1218 supports up to 11.88 Gbps to enable Ultra High Definition Video for 4K/8K applications. With 75-Ω and 50-Ω transmitter outputs, the LMH1218 enables multiple media options such as coax, fiber, and FR-4 PCB.
The integrated 2-to-1 MUX on the input of the LMH1218 enables selection between two video sources, while the programmable equalizer compensates for the printed-circuit board loss to extend signal reach. With a wide range clock-and-data recovery (CDR) circuit, the on-chip reclocker automatically detects and locks to serial data from 270 Mbps to 11.88 Gbps without the need for an external reference clock and loop filter component, thereby simplifying board design and lowering system cost. The reclocked serial data can be routed to either the 75-Ω or 50-Ω transmitter output, or both simultaneously (1-to-2 fanout mode). The output voltage swing is compatible to SFF-8431 (SFP+), ST-2082/1 (Proposed), SMPTE 424M, 344M, 292M, and 259M standards.
A non-disruptive eye monitor allows for real-time measurement of serial data to simplify system start-up or field tuning. The LMH1218 can be programmed using SPI or SMBus Interface.
추가 정보 요청
LMH1218 IBIS-AMI 모델을 사용할 수 있습니다. 지금 요청
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LMH1218 Low Power Ultra HD Cable Driver With Integrated Reclocker datasheet (Rev. E) | PDF | HTML | 2018. 6. 12 | |
| 애플리케이션 노트 | LMH121x 12G SDI PCB Layout Guidelines | 2020. 2. 19 | |||
| 애플리케이션 노트 | LMH12xx MADI Compatibility Application Note | PDF | HTML | 2018. 8. 30 | ||
| 사용 설명서 | LMH1218 Programming Guide (Rev. B) | 2018. 6. 12 | |||
| 기술 문서 | Three reasons why a bidirectional I/O will simplify your next 4K video design | PDF | HTML | 2017. 9. 6 | ||
| 기술 문서 | Three things to consider when upgrading to 4K Ultra HD 12G-SDI interfaces | PDF | HTML | 2016. 4. 13 | ||
| 기술 문서 | SigCon Architect: The keys to your high-speed design | PDF | HTML | 2015. 10. 27 | ||
| 애플리케이션 노트 | SDI Video Bit Rate Calculation | 2015. 4. 10 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LMH1218EVM — LMH1218 평가 모듈
LMH1218EVM 평가 모듈은 리클로커가 통합된 텍사스 인스트루먼트 LMH1218 UHD 케이블 드라이버의 SDI/UHD 및 10GbE 컨디셔닝 신호 기능을 평가하기 위한 완전한 고대역폭 플랫폼을 제공합니다. LMH1218EVM은 표준 적합성 테스트, 성능 평가 및 초기 시스템 프로토타이핑 등의 용도로 사용할 수 있습니다. LMH1218EVM에 사용되는 SMA 및 BNC 에지 런치 커넥터는 상용 사용 가능한 분리 케이블, 어댑터 및 보드(미포함)를 통해 여러 시스템 커넥터 유형에 인터페이스합니다. 이렇게 유연한 연결성을 통해 (...)
SIGCONARCHITECT-SDI-PROFILES — SigCon Architect SDI Profiles
SIGCONARCHITECT-WRTE — SigCon Architect With RTE v2.0.0.8
TIDA-00428 — 리클로킹 기능을 지원하는 12Gbps SDI 및 VoIP 리피터
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RTW) | 24 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.