홈 전력 관리 DC/DC 스위칭 레귤레이터 DC/DC 컨트롤러
홈
전력 관리
DC/DC 스위칭 레귤레이터
DC/DC 컨트롤러
신규

LM851772-Q1

미리 보기

USB-PD용 I²C 인터페이스를 갖춘 차량용 80V 4스위치 벅-부스트 컨트롤러

지금 주문하기
데이터 시트

LM851772-Q1

미리 보기
데이터 시트 지금 주문하기

제품 상세 정보

Rating Automotive Topology Buck-Boost Vin (max) (V) 80 Vin (min) (V) 3.5 Vout (max) (V) 55 Vout (min) (V) 1 Features 1% accuracy, AEC Q100, Adjustable current limit, Adjustable soft start, Adjustable switching frequency, Advanced power saving, Dynamic voltage scaling, Enable, Extended power range, Frequency synchronization, I2C, Light-load efficiency, Load Disconnect, Power good, Spread Spectrum, Synchronous rectification, Tracking, USB C/PD compatible, UVLO adjustable EMI features Frequency Dithering, Spread Spectrum Duty cycle (max) (%) 100 Iq (typ) (A) 0.000075 Operating temperature range (°C) -40 to 150
Rating Automotive Topology Buck-Boost Vin (max) (V) 80 Vin (min) (V) 3.5 Vout (max) (V) 55 Vout (min) (V) 1 Features 1% accuracy, AEC Q100, Adjustable current limit, Adjustable soft start, Adjustable switching frequency, Advanced power saving, Dynamic voltage scaling, Enable, Extended power range, Frequency synchronization, I2C, Light-load efficiency, Load Disconnect, Power good, Spread Spectrum, Synchronous rectification, Tracking, USB C/PD compatible, UVLO adjustable EMI features Frequency Dithering, Spread Spectrum Duty cycle (max) (%) 100 Iq (typ) (A) 0.000075 Operating temperature range (°C) -40 to 150
VQFN (RHA) 40 36 mm² 6 x 6
  • Input range from 3.5V to 80V
    • Selectable input voltage operation threshold up to 58.5V in 0.5V steps
  • Dynamical Vo programming using I2C from:
    • 3.3V to 48V in 20mV monotonous steps
    • 3.3V up to 23V in 10mV monotonous steps
  • Peak current regulation control with small voltage transition ripple overall operating modes
  • Shut down quiescent current 3µA
  • Operating quiescent current 75µA
  • Drive (DRV) pin for dual role port power path
    • Push-Pull output for fast pMOS FET control
    • Configurable as charge pump driver stage for nMOS FET
  • Operation mode selection for high efficiency in light load and high load conditions:
    • Power save mode (Single Pulse/µSleep)
    • Automatic conduction mode
  • Integrated high voltage supply LDO
  • Auxiliary high voltage LDO for microcontroller supply
  • Integrated full-bridge gate drive
    • 2A peak current capability
    • Bootstrap over and undervoltage protection
    • Integrated boot-strap diode
  • Fixed frequency independent from operating mode (boost, buck-boost, buck)
    • Forced PWM mode selectable
    • Switching frequency from 100kHz to 2200kHz
    • External clock synchronization and clock output
  • Spread spectrum operation selectable
  • Average input or output current sensor
    • Programmable from 0.5A to 7A in 50mA steps
  • I2C programmable with diagnostics
  • Automotive temperature range (Tj = -40°C to 150°C)
  • 40-Pin WSON package with wettable flanks
  • Functional Safety-Capable
  • Input range from 3.5V to 80V
    • Selectable input voltage operation threshold up to 58.5V in 0.5V steps
  • Dynamical Vo programming using I2C from:
    • 3.3V to 48V in 20mV monotonous steps
    • 3.3V up to 23V in 10mV monotonous steps
  • Peak current regulation control with small voltage transition ripple overall operating modes
  • Shut down quiescent current 3µA
  • Operating quiescent current 75µA
  • Drive (DRV) pin for dual role port power path
    • Push-Pull output for fast pMOS FET control
    • Configurable as charge pump driver stage for nMOS FET
  • Operation mode selection for high efficiency in light load and high load conditions:
    • Power save mode (Single Pulse/µSleep)
    • Automatic conduction mode
  • Integrated high voltage supply LDO
  • Auxiliary high voltage LDO for microcontroller supply
  • Integrated full-bridge gate drive
    • 2A peak current capability
    • Bootstrap over and undervoltage protection
    • Integrated boot-strap diode
  • Fixed frequency independent from operating mode (boost, buck-boost, buck)
    • Forced PWM mode selectable
    • Switching frequency from 100kHz to 2200kHz
    • External clock synchronization and clock output
  • Spread spectrum operation selectable
  • Average input or output current sensor
    • Programmable from 0.5A to 7A in 50mA steps
  • I2C programmable with diagnostics
  • Automotive temperature range (Tj = -40°C to 150°C)
  • 40-Pin WSON package with wettable flanks
  • Functional Safety-Capable

The LM851772-Q1 is a four switch buck-boost controller. The device provides a regulated output voltage if the input voltage is higher, equal or lower than the adjusted output voltage. In power save mode the device supports very high efficiency over the complete operation range of the output. The output voltage and average current is dynamically programmable using the integrated I2C interface. The configuration range for output voltage and average current meets the USB-PD standard requirements. The integrated DRV pin is used to control an optional disconnect FET if the system is targeted to support dual role port (DRP) requirements.

LM851772-Q1 runs at a fixed switching frequency, which is set using the RT/SYNC pin. The switching frequency remains the same during buck, boost and buck-boost operation. The device maintains small mode transition ripple over all operating modes.

The LM851772-Q1 is a four switch buck-boost controller. The device provides a regulated output voltage if the input voltage is higher, equal or lower than the adjusted output voltage. In power save mode the device supports very high efficiency over the complete operation range of the output. The output voltage and average current is dynamically programmable using the integrated I2C interface. The configuration range for output voltage and average current meets the USB-PD standard requirements. The integrated DRV pin is used to control an optional disconnect FET if the system is targeted to support dual role port (DRP) requirements.

LM851772-Q1 runs at a fixed switching frequency, which is set using the RT/SYNC pin. The switching frequency remains the same during buck, boost and buck-boost operation. The device maintains small mode transition ripple over all operating modes.
filter 기타 DC/DC 컨트롤러 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
3개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet LM851772-Q1 80V VIN 4 Switch Buck-Boost Controller With I2C for USB-PD Sourcing datasheet PDF | HTML 2026/06/19
EVM User's guide LM851772-Q1 Buck-Boost Controller Evaluation Module for USB-PD PDF | HTML 2026/07/23
Application note Layout Optimization of 4-Switch Buck-Boost Converters PDF | HTML 2023/09/05

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LM251772Q1EVM-PD — LM251772-Q1 평가 모듈

LM251772Q1EVM-PD는 LM251772-Q1을 활용한 가변형 고전력 벅-부스트 설계를 보여줍니다. 이 평가 모듈은 9V~36V의 입력 전압 범위에서 작동하고, 최대 5A의 부하 전류로 조정된 5V~48V 출력을 생성하도록 구성되어 있습니다. 이 EVM은 320kHz의 스위칭 주파수에서 작동합니다. 대부분의 장치 설정은 점퍼를 통해 쉽게 조정하거나 설정할 수 있습니다(예: 작동 모드(PSM 또는 fPWM), 바이어스 공급 및 외부 클록 동기화).
사용 설명서: PDF | HTML
TI.com에서 구매할 수 없음
평가 모듈(EVM)용 GUI

LM851772-CONFIGURATON-GUI — LM851772 GUI for configuration via I2C

Graphical User Interface (GUI) to configure the LM851772 via I2C. You can use the Launch button for using the GUI online via a browser or one of the download files to operate the GUI offline
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
시작 다운로드 옵션
계산 툴

LM851772-QUICKSTART-CALC — LM851772 BuckBoost Quickstart Calculator Tool

LM851772 BuckBoost Quickstart Calculator Tool. This standalone tool facilitates and assists the power supply engineer with the design of a DC/DC buck-boost converter based on the LM851772.
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
다운로드
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
VQFN (RHA) 40 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상