LM7705
- Regulated Output Voltage −0.232 V
- Output Voltage Tolerance 5%
- Output Voltage Ripple 4 mVPP
- Supply Voltage 3 V to 5.25 V
- Conversion Efficiency Up to 98%
- Quiescent Current 78 µA
- Shutdown Current 20 nA
- Turnon Time 500 µs
- Operating Temperature Range −40°C to 125°C
- 8-Pin VSSOP Package
The LM7705 device is a switched capacitor voltage inverter with a low noise, −0.23 V fixed negative voltage regulator. This device is designed to be used with low voltage amplifiers to enable the amplifiers output to swing to zero volts. The −0.23 V is used to supply the negative supply pin of an amplifier while maintaining less then 5.5 V across the amplifier. Rail-to-Rail output amplifiers cannot output zero volts when operating from a single-supply voltage and can result in error accumulation due to amplifier output saturation voltage being amplified by following gain stages. A small negative supply voltage will prevent the amplifiers output from saturating at zero volts and will help maintain an accurate zero through a signal processing chain. Additionally, when an amplifier is used to drive an input of the ADC, the amplifier can output a zero voltage signal and the full input range of an ADC can be used. The LM7705 device has a shutdown pin to minimize standby power consumption.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LM7705 Low-Noise Negative Bias Generator datasheet (Rev. D) | PDF | HTML | 2018. 5. 8 | |
| Circuit design | Charge pump circuit (–0.3V) for negative amplifier supply (Rev. A) | PDF | HTML | 2024. 8. 21 | ||
| 애플리케이션 노트 | Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B) | PDF | HTML | 2022. 5. 23 | ||
| 기술 문서 | How to achieve microvoltage-level precision in thermopile applications | PDF | HTML | 2021. 12. 9 | ||
| 애플리케이션 노트 | Attenuator Amplifier Design to Maximize the Input Voltage of Differential ADCs | 2018. 6. 14 | |||
| 기술 문서 | Unique active mux capability combines buffer and switch into one solution | PDF | HTML | 2017. 10. 10 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ADS8168EVM-PDK — ADS8168 8채널 16비트 1MSPS SAR ADC 평가 모듈 성능 데모 키트(PDK)
ADS8168 EVM(평가 모듈) PDK(성능 데모 키트)는 ADS8168 SAR ADC(연속 근사 레지스터 아날로그-디지털 컨버터)의 성능 평가용 플랫폼입니다. ADS8168EVM-PDK에는 ADS8168EVM 보드, PHI(정밀 호스트 인터페이스) 컨트롤러 보드, 사용자가 USB(범용 직렬 버스)를 통해 ADC와 통신하고, 데이터를 캡처하고, 데이터 분석을 수행할 수 있는 관련 컴퓨터 소프트웨어가 포함되어 있습니다.
LM7705MMEVAL — LM7705용 평가 보드
This evaluation board is designed to demonstrate the functionality of Texas Instruments LM7705 Low Noise Negative Bias Generator. The board has a dual Operational Amplifier that can be connected to ground or biased with the on board LM7705. In the last case a True zero amplifier is demonstrated.
많은 TI 레퍼런스 설계에는 LM7705이(가) 포함됩니다.
레퍼런스 디자인 선택 툴을 사용하여 애플리케이션 및 매개 변수에 가장 적합한 설계를 검토하고 식별할 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSSOP (DGK) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.