LM27761
- Inverts and regulates the input supply voltage
- Low output ripple
- Shutdown lowers quiescent current to 7µA (typical)
- Up to 250mA output current
- 2.5Ω inverter output impedance, VIN = 5V
- ±4% regulation at peak load
- 370µA quiescent current
- 2MHz (typical) low-noise fixed-frequency operation
- 35dB (typical) LDO PSRR at 2MHz with 80mA load current
- 30mV LDO dropout voltage at 100mA, VOUT = –5V
- Current limit and thermal protection
The LM27761 low-noise regulated switched-capacitor voltage inverter delivers a very low-noise adjustable output for an input voltage in the range of 2.7V to 5.5V. Four low-cost capacitors are used in the application design to provide up to 250mA of output current. The regulated output for the device is adjustable between −1.5V and −5V. The LM27761 operates at 2MHz (typical) switching frequency to reduce output resistance and voltage ripple. With an operating current of only 370µA (charge-pump power efficiency greater than 80% with most loads) and 7µA typical shutdown current, the LM27761 provides excellent performance when driving power amplifiers, DAC bias rails, and other high-current, low-noise voltage applications.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | LM27761 Low-Noise, Regulated, Switched-Capacitor Voltage Inverter datasheet (Rev. D) | PDF | HTML | 2025/10/16 |
| Application note | Generate Negative Power Supply from Positive Power Supply | PDF | HTML | 2025/07/29 | |
| Application note | Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B) | PDF | HTML | 2022/05/23 | |
| Technical article | Low-noise charge pumps make it easy to create negative voltages | PDF | HTML | 2017/08/30 | |
| Technical article | The top three ways to split a voltage rail to a bipolar supply | PDF | HTML | 2016/12/27 | |
| Technical article | Pump it up quietly | PDF | HTML | 2016/02/19 | |
| EVM User's guide | Using the LM27761EVM Evaluation Module | 2015/12/04 | ||
| White paper | The Forgotten Converter | 2015/06/15 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DAC38RF80EVM — DAC38RF80 듀얼 채널, 14비트, 9GSPS, 6x-24x 보간, 6 & 9GHz PLL DAC 평가 모듈
DAC38RF80EVM은 DAC38RF80/84/90 DAC(디지털-아날로그 컨버터)를 평가하는 데 사용되는 회로 보드입니다. EVM은 최대 9GSPS 샘플링 속도로 DAC의 성능을 평가하는 데 사용할 수 있습니다. FPGA 기반 패턴 생성기 카드 TSW14J56EVM(개정판 B 이상)와 함께 작동하도록 설계되었습니다. EVM에 제공되는 FMC 커넥터를 사용하면 DAC를 타사 공급업체에서 제공한 FPGA 개발 보드에 연결할 수도 있습니다. 또한 사용이 간편한 소프트웨어 인터페이스도 제공됩니다. 이 인터페이스를 이용해 SPI를 통해 (...)
DAC38RF82EVM — DAC38RF82 듀얼 채널, 14비트, 9GSPS, 1x-24x 보간, 6 & 9GHz PLL DAC 평가 모듈
DAC38RF89EVM — DAC38RF89 듀얼 채널, 14비트, 8.4GSPS, 1x-24x 보간, 5 & 7.5GHz PLL DAC 평가 모듈
DAC38RF89 EVM(평가 모듈)은 DAC38RF89 DAC(디지털-아날로그 컨버터)를 평가하는 데 사용되는 회로 보드입니다. DAC38RFEVM은 최대 9GSPS의 샘플링 속도까지 DAC 성능을 평가하는 데 사용할 수 있으며 TSW14J56EVM(Rev B 이상)과 함께 사용하도록 설계되었습니다. 제공되는 FMC 커넥터를 사용하면 DAC를 타사 공급업체에서 제공한 FPGA 개발 보드에 연결할 수도 있습니다. 또한 사용이 간편한 소프트웨어 인터페이스도 제공됩니다. 이 인터페이스를 이용해 SPI를 통해 DAC와 온보드 (...)
LM27761EVM — LM27761 레귤레이션된 충전 펌프 인버터 평가 모듈
The LM27761EVM aids in evaluation of the LM27761 Regulated Charge Pump Inverter. The 2MHz switched capacitor boost provides up to 250 mA of output current utilizing few external components. With a low current PFM or ECO mode, the LM27761 draws a minimal load from the power supply when (...)
LM27761 Unencrypted PSpice Transient Model Package (Rev. A)
TIDA-01215 — RF 샘플링 DAC에서 스퍼 및 위상 잡음 최적화를 위한 전원 공급 장치 레퍼런스 디자인
TIDA-01240 — RF 샘플링 S 대역 레이더 트랜스미터 레퍼런스 디자인
TIDA-01435 — 마이크로파 백홀을 위한 광대역 제로 IF 레퍼런스 디자인
TIDA-01084 — 연속 파형 위상 정렬 다중 톤 생성기: DC-6GHz RF 샘플링 DAC 레퍼런스 디자인
이 레퍼런스 설계에서는 작동 이론, GUI 설명, 외부 패턴 생성기 없이 톤을 생성하도록 NCO를 프로그래밍하는 방법을 다룹니다. 이 설계는 연속 파형 생성을 위한 BOM(재료 사양서)을 크게 간소화하고 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WSON (DSG) | 8 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.