이 제품의 최신 버전이 있습니다
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
LM5175-Q1
- Qualified for Automotive Applications
- AEC-Q100 Qualified with the following results:
- Device Temperature Grade 1: –40°C to
+125°C Ambient Operating Temperature
Range - Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C4B
- Device Temperature Grade 1: –40°C to
- Single Inductor Buck-Boost Controller for Step-
Up/Step-Down DC/DC Conversion - Wide VIN Range: 3.5 V to 42 V, 60 V Maximum
- Flexible VOUT Range: 0.8 V to 55 V
- VOUT Short Protection
- High Efficiency Buck-Boost Transition
- Adjustable Switching Frequency
- Optional Frequency Sync and Dithering
- Integrated 2-A MOSFET Gate Drivers
- Cycle-by-Cycle Current Limit and Optional Hiccup
- Optional Input or Output Average Current Limiting
- Programmable Input UVLO and Soft-Start
- Power Good and Output Overvoltage Protection
- Selectable CCM or DCM with Pulse Skipping
- HTSSOP-28 Package
The LM5175-Q1 is a synchronous four-switch buck-boost DC/DC controller capable of regulating the output voltage at, above, or below the input voltage. The LM5175-Q1 operates over a wide input voltage range of 3.5 V to 42 V (60 V maximum) to support a variety of applications.
The LM5175-Q1 employs current-mode control both in buck and boost modes of operation for superior load and line regulation. The switching frequency is programmed by an external resistor and can be synchronized to an external clock signal.
The device also features a programmable soft-start function and offers protection features including cycle-by-cycle current limiting, input undervoltage lockout (UVLO), output overvoltage protection (OVP), and thermal shutdown. In addition, the LM5175-Q1 features selectable Continuous Conduction Mode (CCM) or Discontinuous Conduction Mode (DCM) operation, optional average input or output current limiting, optional spread spectrum to reduce peak EMI, and optional hiccup mode protection in sustained overload conditions.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LM5175-Q1 42 V Wide VIN Synchronous 4-Switch Buck-Boost Controller datasheet | PDF | HTML | 2016. 4. 11 | |
| 백서 | An overview of radiated EMI specifications for power supplies | 2018. 6. 5 | |||
| 백서 | An overview of conducted EMI specifications for power supplies | 2018. 2. 1 | |||
| 기술 문서 | Buck-boost regulator benefits automotive conducted immunity | PDF | HTML | 2017. 5. 2 | ||
| 백서 | Buck-boost converter enables USB Power Delivery on the road | 2016. 11. 3 | |||
| 아날로그 디자인 학술지 | Reduce buck-converter EMI and voltage stress by minimizing inductive parasitics | 2016. 7. 21 | |||
| 기술 문서 | High Density PCB Layout of DC/DC Converters, Part 2 | PDF | HTML | 2015. 9. 16 | ||
| 기술 문서 | High Density PCB Layout of DC/DC Converters, Part 1 | PDF | HTML | 2015. 9. 12 | ||
| 백서 | Wide VIN power management ICs simplify white paper (Rev. A) | 2013. 9. 19 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM5175EVM — LM5175EVM 넓은 Vin 단일 인덕터 벅-부스트 컨트롤러 평가 모듈
The LM5175EVM is a four-switch non-inverting buck-boost converter based on the LM5175 controller. This converter is designed to operate with input voltage from 6V to 42V and provide a regulated 12V output for load current up to 6A. The high efficiency transition region (...)
LM5175EVM-HD — LM5175EVM-HD 넓은 VIN 4-스위치 벅-부스트 컨트롤러 평가 모듈
The LM5175EVM-HD high power density evaluation module (EVM) is a 4-switch synchronous buck-boost DC/DC regulator that employs synchronous rectification to achieve extremely high conversion efficiency in a small footprint at 72W output power. Operating over a wide input voltage range of 5.5V (...)
LM5175EVM-HP — LM5175EVM-HP 넓은 VIN 4-스위치 벅-부스트 컨버터 고전력 EVM
The LM5175EVM-HP high power EVM is fully assembled and tested platform for evaluating the operation and performance of the LM5175 4-switch buck-boost controller. The LM5175EVM-HP has an input voltage range from 6V to 36V, the output voltage is set as 12V using an external feedback resistor divider. (...)
LM5175QUICKSTART-CALC — LM5175 Quick Start Calculator
LM5175 빠른 시작 설계 툴에 오신 것을 환영합니다. 이 독립 실행형 툴은 LM5175 벅-부스트 PWM 컨트롤러에 기반한 DC/DC 벅 레귤레이터 설계를 통해 전원 공급 장치 엔지니어를 원활하게 지원합니다. 따라서 사용자는 애플리케이션 요구 사항을 충족하기 위해 최적화된 설계에 신속하게 도착할 수 있습니다.
PMP10708 — 3.5~36Vin, 6.5Vout @ 1.2A 동기 4스위치 벅-부스트 컨버터 레퍼런스 설계
PMP10708은 LM5175 컨트롤러 IC를 사용하는 7.8W 4스위치 벅-부스트 컨버터입니다. 이 설계는 3.5Vin~36Vin의 입력 전압을 받아 부하에 1.2A의 전류를 공급할 수 있는 6.5Vout 출력을 제공합니다. 이 설계는 시동-정지 또는 기타 라인 과도 조건 시 3V만으로 작동할 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTSSOP (PWP) | 28 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.