이 제품의 최신 버전이 있습니다
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
LM5176-Q1
- AEC-Q100 qualified for automotive applications
- Temperature grade 1: -40°C to 125°C TA
- Functional Safety-Capable
- Single inductor buck-boost controller for step-up/step-down DC/DC conversion
- Wide VIN: 4.2 V (2.5 V with bias) to 55 V (60 V maximum)
- Flexible VOUT: 0.8 V to 55 V
- VOUT short protection
- High efficiency buck-boost transition
- Adjustable switching frequency
- Optional frequency sync and dithering
- Integrated 2-A MOSFET gate drivers
- Cycle-by-cycle current limit and optional hiccup
- Optional input or output average current limiting
- Programmable input UVLO and soft-start
- Power good and output overvoltage protection
- Available in HTSSOP-28 package
- Create a custom design using the LM5176-Q1 with the WEBENCH Power Designer
The LM5176-Q1 is a synchronous four-switch buck-boost DC/DC controller capable of regulating the output voltage at, above, or below the input voltage. The LM5176-Q1 operates over a wide input voltage range of 4.2 V to 55 V (60 V absolute maximum) to support a variety of applications.
The LM5176-Q1 employs current-mode control both in buck and boost modes of operation for superior load and line regulation. The switching frequency is programmed by an external resistor and can be synchronized to an external clock signal.
The device also features a programmable soft-start function and offers protection features including cycle-by-cycle current limiting, input undervoltage lockout (UVLO), output overvoltage protection (OVP), and thermal shutdown. In addition, the LM5176-Q1 features optional average input or output current limiting, optional spread spectrum to reduce peak EMI, and optional hiccup mode protection in sustained overload conditions.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LM5176-Q1 55-V Wide VIN Synchronous 4-Switch Buck-Boost Controller datasheet (Rev. B) | PDF | HTML | 2021. 8. 13 | |
| 애플리케이션 노트 | Bidirectional TEC Driver Design for 40-W TEC | PDF | HTML | 2023. 6. 2 | ||
| e북 | An Engineer’s Guide to Low EMI in DC/DC Regulators | 2021. 4. 21 | |||
| 기능 안전 정보 | LM5176 and LM5176-Q1 Functional Safety, FIT Rate, Failure FMD | 2020. 5. 22 | |||
| 애플리케이션 노트 | LM5176 Power Sharing Between Two Parallel, Four-Switch Buck-Boost Converters | 2018. 7. 16 | |||
| 백서 | An overview of radiated EMI specifications for power supplies | 2018. 6. 5 | |||
| 백서 | An overview of conducted EMI specifications for power supplies | 2018. 2. 1 | |||
| 기술 문서 | Four-switch buck-boost layout tip No. 3: separating differential sense lines from | PDF | HTML | 2017. 3. 2 | ||
| 기술 문서 | Four-switch buck-boost layout tip No. 2: optimizing hot loops in the power stage | PDF | HTML | 2017. 2. 23 | ||
| 기술 문서 | Four-switch buck-boost layout tip No. 1: identifying the critical parts for layout | PDF | HTML | 2017. 2. 20 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM5176EVM-HP — LM5176 넓은 VIN 벅 부스트 컨트롤러 평가 모듈
SNVC208 — LM5176 Design Calculator
PMP31052 — 오토모티브, 4스위치, 300W 벅 부스트 레퍼런스 설계
이 레퍼런스 설계는 LM5176-Q1 컨트롤러 IC를 사용하는 차량용, 4스위치, 벅-부스트 컨버터 회로입니다. 전원 공급 장치는 입력 전압을 스텝업 및 스텝다운할 수 있습니다. 이 설계는 4.5V~27V의 입력 전압을 받고, 크랭킹 레벨, 크랭킹 시간, 열 인터페이스 및 최대 주변 온도에 따라 최대 30A까지 공급 가능한 12V의 조정된 출력을 제공합니다.
이 설계의 목적은 단일 전력단을 최대 출력 전류에 강제로 공급하는 것입니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTSSOP (PWP) | 28 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.