홈 전력 관리 DC/DC switching regulators DC/DC converters
홈
전력 관리
DC/DC switching regulators
DC/DC converters

LM5160

활성

LM5160 넓은 입력 65V, 2A 동기 벅/Fly-Buck™ 컨버터

지금 주문하기
데이터 시트

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
LM5012 활성 초저 IQ가 포함된 6V~100V 입력, 2.5-A 비동기 벅 DC/DC 컨버터 Higher input voltage rating, easy to use SO-8 package and low IQ.

LM5160

활성
데이터 시트 지금 주문하기

제품 상세 정보

Rating Catalog Topology Buck, Flybuck Iout (max) (A) 2 Vin (max) (V) 65 Vin (min) (V) 4.5 Vout (max) (V) 60 Vout (min) (V) 2 Switch current limit (typ) (A) 2.5 Features Enable, Light load efficiency, Pre-bias soft start, Synchronous rectification Control mode Constant on-time (COT) Operating temperature range (°C) -40 to 125 Duty cycle (max) (%) 92
Rating Catalog Topology Buck, Flybuck Iout (max) (A) 2 Vin (max) (V) 65 Vin (min) (V) 4.5 Vout (max) (V) 60 Vout (min) (V) 2 Switch current limit (typ) (A) 2.5 Features Enable, Light load efficiency, Pre-bias soft start, Synchronous rectification Control mode Constant on-time (COT) Operating temperature range (°C) -40 to 125 Duty cycle (max) (%) 92
WSON (DNT) 12 16 mm² 4 x 4
  • Wide 4.5-V to 65-V Input Voltage Range
  • Integrated High-Side and Low-Side Switches
    • No External Schottky Diode Required
  • 2-A Maximum Load Current
  • Adaptive Constant On-Time Control
    • No External Loop Compensation
    • Fast Transient Response
  • Selectable Forced PWM or DCM Operation
    • FPWM Supports Multi-Output Fly-Buck™
  • Nearly Constant Switching Frequency
    • Resistor Adjustable up to 1 MHz
  • Programmable Soft-Start Time
  • Prebiased Start-Up
  • ±1% Feedback Voltage Reference
  • LM5160A Allows External VCC Bias
  • Inherent Protection Features for Robust Design
    • Peak Current Limiting Protection
    • Adjustable Input UVLO and Hysteresis
    • VCC and Gate Drive UVLO Protection
    • Thermal Shutdown Protection With Hysteresis
  • Create a Custom Design Using the LM5160A With the WEBENCH® Power Designer
  • Wide 4.5-V to 65-V Input Voltage Range
  • Integrated High-Side and Low-Side Switches
    • No External Schottky Diode Required
  • 2-A Maximum Load Current
  • Adaptive Constant On-Time Control
    • No External Loop Compensation
    • Fast Transient Response
  • Selectable Forced PWM or DCM Operation
    • FPWM Supports Multi-Output Fly-Buck™
  • Nearly Constant Switching Frequency
    • Resistor Adjustable up to 1 MHz
  • Programmable Soft-Start Time
  • Prebiased Start-Up
  • ±1% Feedback Voltage Reference
  • LM5160A Allows External VCC Bias
  • Inherent Protection Features for Robust Design
    • Peak Current Limiting Protection
    • Adjustable Input UVLO and Hysteresis
    • VCC and Gate Drive UVLO Protection
    • Thermal Shutdown Protection With Hysteresis
  • Create a Custom Design Using the LM5160A With the WEBENCH® Power Designer

The LM5160/A is a 65-V, 2-A synchronous step-down converter with integrated high-side and low-side MOSFETs. The adaptive constant on-time control scheme requires no loop compensation and supports high step-down ratios with fast transient response. An internal feedback amplifier maintains ±1% output voltage regulation over the entire operating temperature range. The on-time varies inversely with input voltage resulting in nearly constant switching frequency.

Peak and valley current limit circuits protect against overload conditions. The undervoltage lockout (EN/UVLO) circuit provides independently adjustable input undervoltage threshold and hysteresis. The LM5160/A is programmed through the FPWM pin to operate in continuous conduction mode (CCM) from no load to full load or to automatically switch to discontinuous conduction mode (DCM) at light load for higher efficiency. Forced CCM operation supports multiple-output and isolated Fly-Buck applications using a coupled inductor.

The LM5160A shares the same features and pin configuration as the LM5160. An external bias supply can be connected to the VCC pin of the LM5160A in Buck and Fly-Buck applications. This additional capability lowers IC power dissipation and improves efficiency at high input voltages.

The LM5160/A is a 65-V, 2-A synchronous step-down converter with integrated high-side and low-side MOSFETs. The adaptive constant on-time control scheme requires no loop compensation and supports high step-down ratios with fast transient response. An internal feedback amplifier maintains ±1% output voltage regulation over the entire operating temperature range. The on-time varies inversely with input voltage resulting in nearly constant switching frequency.

Peak and valley current limit circuits protect against overload conditions. The undervoltage lockout (EN/UVLO) circuit provides independently adjustable input undervoltage threshold and hysteresis. The LM5160/A is programmed through the FPWM pin to operate in continuous conduction mode (CCM) from no load to full load or to automatically switch to discontinuous conduction mode (DCM) at light load for higher efficiency. Forced CCM operation supports multiple-output and isolated Fly-Buck applications using a coupled inductor.

The LM5160A shares the same features and pin configuration as the LM5160. An external bias supply can be connected to the VCC pin of the LM5160A in Buck and Fly-Buck applications. This additional capability lowers IC power dissipation and improves efficiency at high input voltages.
filter 기타 DC/DC converters 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
23개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet LM5160, LM5160A Wide Input 65-V, 2-A Synchronous Buck / Fly-Buck™ DC/DC Converter datasheet (Rev. E) PDF | HTML 2018/10/12
Product overview Isolated Power Topologies for PLC I/O Modules and Other Low-Power Applications (Rev. A) PDF | HTML 2024/08/20
Application brief Faster Switching of Large Inductive Loads in Digital Output Modules PDF | HTML 2022/07/15
Selection guide Current Sense Amplifiers (Rev. E) 2021/09/20
White paper Valuing wide VIN, low EMI synchronous buck circuits for cost-driven, demanding a (Rev. A) 2019/04/10
Application note Stability Analysis and Design of COT Type-3 Ripple Circuit 2019/03/20
Application brief Powering Drones With a Wide VIN DC-DC Converter (Rev. A) 2019/02/05
Technical article Why a wide VIN DC/DC converter is a good fit for high-cell-count battery-powered d PDF | HTML 2017/11/21
Application brief PSR Flyback DC/DC Converter Transformer Design for mHEV Applications 2017/11/13
Technical article Simplify your power storage design with these Fly-Buck™ power tips PDF | HTML 2017/09/13
Technical article Where shrinking makes sense: improving isolated, split-rail power designs in indus PDF | HTML 2016/08/22
Technical article Power Tips: Self-drive your synchronous rectifier PDF | HTML 2016/03/09
More literature Powering IGBT Drivers with Fly-Buck™ 2015/12/03
Technical article Create a Fly-Buck™ converter in WEBENCH® Power Designer PDF | HTML 2015/10/09
White paper Designing isolated rails on the fly with Fly-Buck™ converters 2015/09/29
Technical article What is behind isolated DC/DC converter voltage regulation? PDF | HTML 2015/08/31
Technical article Lower EMI and quiet switching with the Fly-Buck™ topology PDF | HTML 2015/08/17
Application note Is Your IGBT Gate-Driver Power Supply Optimized 2015/03/12
EVM User's guide LM5160 FlyBuck (Isolated Buck) User’s Guide (Rev. A) 2015/02/06
Analog Design Journal Fly-Buck(TM) converter provides EMC and isolation in PLC applications 2015/01/29
Application note Design a Flybuck Solution with Optocoupler to Improve Regulation Performance 2015/01/19
Application note AN-2292 Designing an Isolated Buck (Fly-Buck) Converter (Rev. C) 2014/12/17
White paper Wide VIN power management ICs simplify white paper (Rev. A) 2013/09/19

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LM5160DNTBKEVM — LM5160DNTBKEVM 넓은 입력 65V, 1.5A 동기 강압 DC-DC 컨버터

 

The LM5160DNTBKEVM evaluation board provides a fully functional buck regulator, employing the constant on-time (COT) operating principle. This evaluation board provides a 5V output over an input range of 10V to 60V. The circuit delivers load currents to 1.5A. The application schematic is setup up (...)

사용 설명서: PDF
TI.com에서 구매할 수 없음
평가 보드

LM5160DNTFBKEVM — LM5160DNTFBKEVM Fly-Buck 절연 바이어스 전원 공급기 평가 보드

The LM5160DNTFBK evaluation module is designed to operate from a 24V nominal bus with an input voltage range of 18V to 32V.  It is capable of supplying 12V/400 mA to the load at the isolated output.  The nominal switching frequency is 300kHz.  The high side and low side MOSFETs are (...)

사용 설명서: PDF
TI.com에서 구매할 수 없음
시뮬레이션 모델

LM5160 PSpice Transient Model

SNVM692.ZIP (92 KB) - PSpice Model
다운로드
시뮬레이션 모델

LM5160 TINA-TI Flybuck Reference Design

SNVMB64.TSC (304 KB) - TINA-TI Reference Design
다운로드
시뮬레이션 모델

LM5160 Unencrypted PSpice Transient Model

SNVM965.ZIP (3 KB) - PSpice Model
다운로드
계산 툴

FLYBUCK-FLYBACK-DESIGN-CALC — Flybuck / Flyback Calculator

This tool helps a power supply engineer to select the right isolated DC-DC topology based on the specifications. Depending on the topology chosen, the calculator also recommends the right IC for the design.

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
다운로드
계산 툴

LM5160DNTBK-CALC — LM5160 Buck Regulator Quick Start Calculator

Welcome to the LM5160 Buck Regulator Quick Start Design Tool. This stand-alone tool facilitates and assists the power supply engineer with design of a DC/DC buck regulator based on the LM5160 65V, 1.5A COT Buck Regulator. As such, the user can expeditiously arrive at an optimized design to meet the (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
다운로드
계산 툴

LM5160DNTFBK-CALC — LM5160 Fly-Buck Regulator Quick Start Calculator

Welcome to the LM5160 Fly-Buck Regulator Quick Start Design Tool. This stand-alone tool facilitates and assists the power supply engineer with design of a DC/DC Fly-Buck regulator based on the LM5160 65V, 1.5A COT Fly-Buck Regulator. As such, the user can expeditiously arrive at an optimized design (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
다운로드
거버(Gerber) 파일

FLYBUCK FLYBACK Design Calculator

SNVC228.ZIP (1800 KB)
다운로드

많은 TI 레퍼런스 설계에는 LM5160이(가) 포함됩니다.

레퍼런스 디자인 선택 툴을 사용하여 애플리케이션 및 매개 변수에 가장 적합한 설계를 검토하고 식별할 수 있습니다.

레퍼런스 설계 보기
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
WSON (DNT) 12 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상