이 제품의 최신 버전이 있습니다
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
LM5022
- Internal 60-V start-up regulator
- 1-A Peak MOSFET gate driver
- VIN Range: 6 V to 60 V (operates down to 3 V after start-up)
- Duty cycle limit of 90%
- Programmable UVLO with hysteresis
- Cycle-by-cycle current limit
- External synchronizable (AC-coupled)
- Single resistor oscillator frequency set
- Slope compensation
- Adjustable soft start
- 10-Pin VSSOP package
The LM5022 device is a high-voltage, low-side, N-channel MOSFET controller ideal for use in boost and SEPIC regulators. It contains all of the features required to implement single-ended primary topologies. Output voltage regulation is based on current-mode control, which eases the design of loop compensation while providing inherent input voltage feedforward. The LM5022 includes a start-up regulator that operates over a wide input range of 6 V to 60 V. The PWM controller is designed for high-speed capability including an oscillator frequency range up to 2.2 MHz and total propagation delays less than 100 ns. Additional features include an error amplifier, precision reference, line undervoltage lockout, cycle-by-cycle current limit, slope compensation, soft start, external synchronization capability, and thermal shutdown. The LM5022 is available in the 10-pin VSSOP package.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LM5022 60-V Low-Side Controller for Boost and SEPIC datasheet (Rev. J) | PDF | HTML | 2018. 5. 21 | |
| 선택 가이드 | Power Management Guide 2018 (Rev. R) | 2018. 6. 25 | |||
| 기술 문서 | What is behind isolated DC/DC converter voltage regulation? | PDF | HTML | 2015. 8. 31 | ||
| 백서 | How to design boost, SEPIC or flyback regulators with wide VIN power ICs | 2014. 7. 29 | |||
| 애플리케이션 노트 | Demystifying Type II and Type III Compensators Using Op-Amp and OTA for DC/DC Co | 2014. 7. 11 | |||
| 애플리케이션 노트 | AN-1696 Designing a Boost LED Driver Using the LM5022 (Rev. B) | 2013. 5. 6 | |||
| 애플리케이션 노트 | AN-1656 Design Challenges of Switching LED Drivers (Rev. A) | 2013. 5. 3 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM5022EVAL — 부스트용 60V 넓은 Vin 저압측 컨트롤러 평가 보드
The LM5022EVM evaluation module (EVM) is a fixed frequency (500-kHz) non-synchronous boost converter providing fixed 40.0-V output at up to 500 mA from a 9-V to 16-V input. The EVM is designed to start up from a single supply, with no additional bias voltage required for start-up. The module uses (...)
LM5022 TINA-TI Boost Load Transient Reference Design
FLYBUCK-FLYBACK-DESIGN-CALC — Flybuck / Flyback Calculator
이 툴은 전원 공급 장치 엔지니어가 사양에 따라 올바른 절연 DC-DC 토폴로지를 선택하는 데 도움이 됩니다. 선택한 토폴로지에 따라 계산기는 설계에 적합한 IC도 추천합니다.
많은 TI 레퍼런스 설계에는 LM5022이(가) 포함됩니다.
레퍼런스 디자인 선택 툴을 사용하여 애플리케이션 및 매개 변수에 가장 적합한 설계를 검토하고 식별할 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSSOP (DGS) | 10 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.