INA310A
- Wide common-mode voltage:
- Operational voltage: −4 V to +110 V
- Survival voltage: −20 V to +120 V
- High signal bandwidth: 1.3 MHz
- Slew rate: 2.5 V/µs
- Excellent CMRR: 160 dB
- Accuracy
- Gain error (maximum)
- Version A: 0.15%, 10 ppm/°C drift
- Version B: 0.5%, 20 ppm/°C drift
- Offset voltage (maximum)
- Version A: ±20 µV, ±0.25 µV/°C drift
- Version B: ±150 µV, ±1 µV/°C drift
- Gain error (maximum)
- On-board open-drain comparator
- Internal comparator voltage reference: 0.6 V
- Propagation delay time: 1 µs
- Latching capability on comparator
- Available gains:
- INA310A1, INA310B1 : 20 V/V
- INA310A2, INA310B2 : 50 V/V
- INA310A3, INA310B3 : 100 V/V
- INA310A4, INA310B4 : 200 V/V
- INA310A5, INA310B5 : 500 V/V
- Package options: VSSOP-8
The INA310x is an ultra-precise current sense amplifier that can measure voltage drops across shunt resistors over a wide common-mode range from –4 V to 110 V, independent of supply voltage with an integrated comparator. The high precision current measurement accuracy is achieved through a combination of low offset voltage (20 µV, maximum), small gain error (0.15%, maximum) and a high DC CMRR (160 dB, typical). The INA310x has a high signal bandwidth of 1.3 MHz designed for high voltage DC current measurements and high-speed applications like fast overcurrent protection.
The INA310x incorporates an open-drain comparator and internal reference that provides a 0.6 V threshold. An external resistive divider sets the current trip point. The comparator includes a latching capability that can be made transparent by grounding (or leaving open) the RESET pin.
The INA310x operates from a single 2.7 V to 20 V supply and draws 1.6 mA of supply current. The INA310x is available in five gain options: 20 V/V, 50 V/V, 100 V/V, 200 V/V, and 500 V/V. These gain options address a wide dynamic range of current-sensing applications.
The INA310x is specified over an operating temperature range of −40°C to +125°C and is offered in a space-saving 8-pin VSSOP package.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | INA310x –4 V to 110 V, 1.3 MHz, Ultra-Precise Current Sense Amplifier With Open-Drain Comparator and Reference datasheet | PDF | HTML | 2023. 3. 21 | |
| 애플리케이션 노트 | Risks and Prevention of ESD, EOS, and Latch Up Events for Current Sense Amplifiers | PDF | HTML | 2024. 11. 18 | ||
| Application brief | Current Sensing Applications in Communication Infrastructure Equipment (Rev. C) | PDF | HTML | 2023. 8. 8 | ||
| 인증서 | INA310AEVM EU Declaration of Conformity (DoC) | 2023. 5. 3 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DIP-ADAPTER-EVM — DIP 어댑터 평가 모듈
소형 표면 실장 IC(집적 회로)와 쉽고 빠르며 경제적인 방식으로 인터페이싱하는 방법을 제공하는 DIP 어댑터 평가 모듈(DIP-ADAPTER-EVM)로 연산 증폭기 프로토타이핑 및 테스트 속도를 높이세요. 제품에 포함된 Samtec 터미널 스트립을 사용하여 지원되는 연산 증폭기를 연결하거나 기존 회로에 직접 연결할 수 있습니다.
DIP 어댑터 EVM 키트는 다음을 포함해 가장 널리 사용되는 6개의 업계 표준 패키지를 지원합니다.
- D 및 U(SOIC-8)
- PW(TSSOP-8)
- DGK(MSOP-8, VSSOP-8)
- (...)
INA310EVM — -4-V~110V, 1.3MHz 아날로그 전류 감지 증폭기용 INA310 평가 모듈
INA310EVM 평가 모듈(EVM)은 INA310 디바이스의 기본 기능 평가를 제공하기 위해 고안되었습니다. EVM은 5개의 게인 옵션(1~5)에 대한 PCB 컷아웃 옵션이 있는 인쇄 회로 보드(PCB) 1개로 구성됩니다. 각 PCB 컷아웃에는 하나의 INA310xn 장치(x는 버전 A 또는 B, n은 1, 2, 3, 4 또는 5), 외부 하드웨어 연결을 위한 테스트 포인트 및 소켓, 옵션 회로를 납땜하기 위한 패드가 있습니다. EVM은 PCB를 통해 최대 5A의 전류 측정을 지원합니다.
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
CS-AMPLIFIER-ERROR-TOOL — Current Sense Amplifier Comparison and Error Tool
TIDA-010936 — 통합 모터 드라이브를 위한 48V/16A 소형 폼 팩터 3상 GaN 인버터 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSSOP (DGK) | 8 | Ultra Librarian |