ESD2CAN24-Q1
- IEC 61000-4-2 level 4 ESD protection:
- ±30kV, ±25kV or ±20kV contact discharge
- ±30kV, ±25kV or ±20kV air-gap discharge
- ISO 10605 (330pF, 330Ω) ESD protection:
- ±27kV or ±20kV contact discharge
- ±27kV or ±20kV air-gap discharge
- Tested in compliance to IEC 61000-4-5
- 24V working voltage
- Bidirectional ESD protection
- 2-channel device provides complete ESD protection with single component
- Low clamping voltage protects downstream components
- AEC-Q101 qualified
- I/O capacitance = 3pF, 2.5pF, or 1.7pF (typical)
- SOT-23 (DBZ) small, standard, common footprint
- SOT-323, SC-70 (DCK) very small, standard, space saving, common footprint
- Leaded packages used for automatic optical inspection (AOI)
The ESD2CANxx24-Q1 is a bidirectional ESD protection diode for Controller Area Network (CAN) interface protection. The ESD2CANxx24-Q1 is rated to dissipate contact ESD strikes beyond the maximum level specified in the ISO 10605 automotive standard (±27kV Contact, ±27kV Airgap). The low dynamic resistance and low clamping voltage enables system level protection against transient events. This protection is key as automotive systems require a high level of robustness and reliability for safety applications.
This device features a low IO capacitance per channel and a pin-out to suit two automotive CAN bus lines (CANH and CANL) from the damage caused by ElectroStatic Discharge (ESD) and other transients. Additionally, the 3pF (typical) or less line capacitance of the ESD2CANxx24-Q1 is designed for CAN, CANFD, CAN SiC, and CAN-XL applications that can support data rates up to 10Mbps.
The ESD2CANxx24-Q1 is offered in two leaded packages for easy flow through routing.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | ESD2CANxx24-Q1 Automotive 24V, 2-Channel ESD Protection Diode for In-Vehicle Networks datasheet (Rev. D) | PDF | HTML | 2026. 3. 23 | |
| Application brief | Data Line ESD Protection: TVS Diodes or Chip Varistors? | PDF | HTML | 2024. 2. 6 | ||
| Product overview | Protecting Automotive CAN Bus Lines | PDF | HTML | 2023. 6. 8 | ||
| 애플리케이션 노트 | ESD Packaging and Layout Guide (Rev. B) | PDF | HTML | 2022. 8. 18 | ||
| 애플리케이션 노트 | Protecting Automotive CAN Bus Systems From ESD Overvoltage Events | PDF | HTML | 2022. 4. 27 | ||
| 기술 문서 | ESD fundamentals, part 4: ESD capacitance | PDF | HTML | 2018. 2. 12 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ESDEVM — 0402, 0201 등을 포함한 ESD 다이오드 패키지용 범용 평가 모듈
TCAN1463EVM — 오토모티브 저전력 신호 개선 CAN FD 트랜시버를 위한 TCAN1463-Q1 평가 모듈
이 EVM은 TCAN1463DRQ1이 설치되어 있고 신호 개선 가능 네트워크에서 트랜시버 작동을 평가하는 데 사용됩니다. 이 제품은 사용자 가이드에 설명된 대로 EVM의 트랜시버 및 설정 점퍼를 교체하여 TCAN1043HG-Q1, TCAN1043G-Q1, TCAN1043H-Q1, TCAN1043A-Q1 및 TCAN1043-Q1 14핀 CAN 트랜시버와 함께 사용하도록 구성할 수 있습니다.
TIDA-010271 — 에너지 저장 시스템을 위한 적층형 배터리 관리 장치 레퍼런스 디자인
TIDA-020076 — 차량용 고전압 BMS 레퍼런스 설계: 18S 유선 또는 무선 셀 감시 장치
이 레퍼런스 설계는 최대 18개의 셀을 위한 셀 감시 장치를 구현합니다. 이 장치는 승용차, 상업용 차량 및 2륜차와 3륜차(72V보다 높은 전압에서 작동)에 사용되는 일반적인 고전압 배터리 범위를 지원하기 위해 데이지 체인으로 연결할 수 있습니다. 이 레퍼런스 설계는 유무선 BMS(배터리 관리 시스템) 성능을 나란히 비교할 수 있도록 유선 및 무선 접속 옵션을 모두 제공합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBZ) | 3 | Ultra Librarian |
| SOT-SC70 (DCK) | 3 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.