DS10BR150

활성

1.0Gbps LVDS 버퍼/리피터

지금 주문하기

데이터 시트

document-pdfAcrobat DS10BR150 1.0 Gbps LVDS Buffer / Repeater datasheet (Rev. D) (영어)

DS10BR150

활성

데이터 시트

지금 주문하기

제품 상세 정보

Function

Buffer

Protocols

CML, LVDS, LVPECL

Number of transmitters

1

Number of receivers

1

Signaling rate (Mbps)

1000

Input signal

CML, LVDS, LVPECL

Output signal

LVDS

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Function

Buffer

Protocols

CML, LVDS, LVPECL

Number of transmitters

1

Number of receivers

1

Signaling rate (Mbps)

1000

Input signal

CML, LVDS, LVPECL

Output signal

LVDS

Rating

Catalog

Operating temperature range (°C)

-40 to 85

WSON (NGQ)

8

9 mm² (3 mm × 3 mm)

DC - 1.0 Gbps Low Jitter, High Noise Immunity, Low Power Operation
On-chip 100Ω Input and Output Termination Minimizes Insertion and Return Losses, Reduces Component Count and Minimizes Board Space
7 kV ESD on LVDS I/O Pins Protects Adjoining Components
Small 3 mm x 3 mm 8-WSON Space Saving Package

All trademarks are the property of their respective owners.

DC - 1.0 Gbps Low Jitter, High Noise Immunity, Low Power Operation
On-chip 100Ω Input and Output Termination Minimizes Insertion and Return Losses, Reduces Component Count and Minimizes Board Space
7 kV ESD on LVDS I/O Pins Protects Adjoining Components
Small 3 mm x 3 mm 8-WSON Space Saving Package

All trademarks are the property of their respective owners.

The DS10BR150 is a single channel 1.0 Gbps LVDS buffer optimized for high-speed signal transmission over lossy FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and noise immunity.

Wide input common mode range allows the receiver to accept signals with LVDS, CML and LVPECL levels; the output levels are LVDS. A very small package footprint requires a minimal space on the board while the flow-through pinout allows easy board layout. The differential inputs and outputs are internally terminated with a 100Ω resistor to lower device input and output return losses, reduce component count and further minimize board space.

The DS10BR150 is a single channel 1.0 Gbps LVDS buffer optimized for high-speed signal transmission over lossy FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and noise immunity.

Wide input common mode range allows the receiver to accept signals with LVDS, CML and LVPECL levels; the output levels are LVDS. A very small package footprint requires a minimal space on the board while the flow-through pinout allows easy board layout. The differential inputs and outputs are internally terminated with a 100Ω resistor to lower device input and output return losses, reduce component count and further minimize board space.

filter

기타 LVDS, M-LVDS 및 PECL IC 찾기

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new

대안 비교

비교 대상 장치와 유사한 기능.

DS10BR254

활성

1.5Gbps 1:4 LVDS 리피터 Additionally functions as a repeater, faster speed (1.5Gbps), more transmitters and repeaters (4T/2R)

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.

2개 모두 보기

상위 문서	유형	직함	형식 옵션	최신 영어 버전 다운로드	날짜
*	데이터 시트	DS10BR150 1.0 Gbps LVDS Buffer / Repeater datasheet (Rev. D)			2013. 4. 12
	사용 설명서	1.06 Gbps LVDS Buffer Repeater (DS10BR150) Evaluation Kit			2012. 1. 25

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

DS10BR150EVK — 1.06Gbps LVDS 버퍼 리피터(DS10BR150) 평가 키트

The DS10BR150EVK is an evaluation kit designed for demonstrating performance of the 1.06 Gbps LVDS Buffer / Repeater (DS10BR150). The purpose of this document is to: familiarize you with the DS10BR150EVK, suggest the test setup procedures and instrumentation, and guide you through some typical (...)

지원되는 제품 및 하드웨어

재고 있음

제한:

주문하려면 로그인

lock

재고를 보려면 로그인

??asset.out-of-stock-ti_ko_KR??

이용할 수 없음

시뮬레이션 모델