DRV8899-Q1
- AEC-Q100 Qualified for Automotive
- Up to 1/256 microstepping
- Integrated current sense functionality
- No sense resistors required
- Smart tune decay technology, Fixed slow, and mixed decay options
- 4.5 to 45-V Operating supply voltage range
- Pin to pin RDS(ON) variants:
- DRV8889/A-Q1: 900 mΩ HS + LS at 25°C
- DRV8899-Q1: 1200 mΩ HS + LS at 25°C - High current capacity per bridge
- DRV8889/A-Q1: 2.4-A peak, 1.5-A full-scale
- DRV8899-Q1: 1.7-A peak, 1-A full-scale
- TRQ_DAC bits to scale full-scale current
- Configurable off-time PWM chopping
- Simple STEP/DIR interface
- SPI with daisy chain support
- Low-current sleep mode (2 µA)
- Programmable output slew rate
- Spread spectrum clocking to minimize EMI
- Protection features
- VM undervoltage lockout
- Overcurrent protection
- Open load detection
- Overtemperature warning and shutdown
- Undertemperature warning
- Fault condition indication pin (nFAULT)
- Functional Safety-Capable
The DRV8899-Q1 is a fully integrated stepper motor driver, supporting up to 1 A full scale current with an internal microstepping indexer, smart tune decay technology, and integrated current sensing. With a simple step/dir interface to manage the direction and step rate, DRV8899-Q1 supports up to 1/256 levels of microstepping to enable a smooth motion profile. Integrated current sensing eliminates the need for two external resistors, saving board space and cost. DRV8899-Q1 provides 8 decay mode options including: smart tune, slow, and mixed decay options. Smart tune automatically adjusts for optimal current regulation performance and compensates for any motor variation and aging effects. The device also includes an integrated torque DAC which allows for the controller to scale the output current through SPI without needing to scale the VREF voltage reference. A low-power sleep mode is provided for very low standby current using an nSLEEP pin. The device features full duplex, 4-wire synchronous SPI communication, with daisy chain support for up to 63 devices connected in series, for configurability and detailed fault reporting. View our full portfolio of stepper motor drivers on ti.com.
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | DRV8899-Q1 Automotive Stepper Driver with Integrated Current Sense and 1/256 Micro-Stepping datasheet (Rev. B) | PDF | HTML | 2021/04/20 |
| Application brief | Advantages of Integrated Current Sensing (Rev. B) | PDF | HTML | 2022/06/20 | |
| Application note | Daisy Chain Implementation for Serial Peripheral Interface (Rev. A) | 2021/04/07 | ||
| Functional safety information | DRV8899-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA | PDF | HTML | 2021/03/08 | |
| Application note | Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) | PDF | HTML | 2021/01/19 | |
| User guide | DRV8899-Q1EVM GUI User's Guide (Rev. A) | 2019/10/11 | ||
| White paper | How smart tune regulates current in stepper motors (Rev. A) | 2019/03/19 | ||
| Application note | Protecting Automotive Motor Drive Systems from Reverse Polarity Conditions (Rev. A) | 2019/02/19 | ||
| Application brief | Smart Tuning for Efficient Stepper Driving | 2018/11/20 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DRV8899-Q1EVM — 전류 감지 및 1/256 마이크로스테핑 EVM이 포함된 차량용 스테퍼 드라이버
DRV8899-Q1 평가 모듈(EVM)을 사용하면 DRV8899-Q1 장치를 쉽게 평가할 수 있습니다. DRV8899-Q1 장치는 차량용 스테퍼 모터 애플리케이션을 위한 통합 듀얼 H 브리지 드라이버입니다.
이 평가 모듈(EVM)을 사용하면 마이크로스테핑부터 1/256 스텝 분해능, 스마트 튜닝을 위한 여러 감쇠 모드를 포함한 모든 기능 모드에 맞게 장치를 구성할 수 있습니다. 보드의 MSP430F2617은 DRV8899-Q1을 제어하기 위한 STEP, DIR(방향) 및 SPI 신호를 제공합니다. 이러한 설정은 이 EVM에 사용할 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGE) | 24 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.