DRV2511-Q1
- AEC-Q100 Qualified for automotive applications:
- Temperature grade 1: –40°C to 125°C, TA
- Device HBM ESD classification level H2
- Device CDM ESD classification level C3
- Wide operating voltage (4.5 V - 18 V)
- Capable of handling voltage of 30 V
- High current drive (8-A Peak)
- Low RDS(on), full H-bridge output
- Integrated fault protection
- Short-circuit protection
- Over-temperature protection
- Over-voltage and under-voltage protection
- Analog input
- Dedicated interrupt pin
The DRV2511-Q1 device is a high current haptic driver specifically designed for inductive loads, such as solenoids and voice coils.
The output stage of the DRV2511-Q1 device consists of a full H-bridge capable of delivering 8 A of peak current.
The DRV2511-Q1 device provides protection functions such as undervoltage lockout, over-current protection and over-temperature protection.
The DRV2511-Q1 device is automotive qualified.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DRV2511-Q1 8-A Automotive Haptic Drivers for Solenoid and Voice Coils datasheet (Rev. B) | PDF | HTML | 2018. 9. 11 | |
| 사용 설명서 | Haptic Control Console GUI (Rev. B) | 2021. 10. 14 | |||
| 기술 문서 | Four tech trends that improve the driver experience | PDF | HTML | 2017. 1. 6 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DRV2511Q1EVM — 솔레노이드용 DRV2511-Q1 오토모티브 햅틱 드라이버 평가 모듈
HAPTICS-CONSOLE — Haptic Control Console v1.6.0.2
햅틱 제어 콘솔 소프트웨어는 TI의 햅틱 드라이버를 위한 평가 및 개발 제품군입니다. 햅틱 제어 콘솔 소프트웨어는 고급 촉각 피드백을 개발하기 위한 햅틱 드라이버와 타사 햅틱 액추에이터의 평가를 지원합니다.
시작하려면 햅틱 드라이버용 평가 모듈(EVM)을 USB를 통해 햅틱 제어 콘솔 소프트웨어를 사용하여 컴퓨터에 연결하여 전체 장치를 설정, 제어 및 평가하면 됩니다. 햅틱 제어 콘솔 소프트웨어에는 관련 장치를 위한 빠른 설정 콘솔, 전체 장치 레지스터 맵, 기본 장치 RAM 관리가 포함되어 있습니다.
지원되는 평가 모듈 및 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTSSOP (DAP) | 32 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.