DP83848Q-Q1
- AEC-Q100 Grade 2
- Extreme Temperature From –40°C to 105°C
- Low-Power 3.3-V, 0.18-µm CMOS Technology
- Low Power Consumption < 270 mW Typical
- 3.3-V MAC Interface
- Auto-MDIX for 10/100 Mb/s
- Energy Detection Mode
- 25-MHz Clock Out
- RMII Rev. 1.2 Interface (Configurable)
- MII Serial Management Interface (MDC and MDIO)
- IEEE 802.3u MII
- IEEE 802.3u Auto-Negotiation and Parallel
Detection - IEEE 802.3u ENDEC, 10BASE-T Transceivers and
Filters - IEEE 802.3u PCS, 100BASE-TX Transceivers and
Filters - Integrated ANSI X3.263 Compliant TP-PMD
Physical Sublayer With Adaptive Equalization and
Baseline Wander Compensation - Error-Free Operation up to 150 Meters
- Programmable LED Support for Link and Activity
- Single Register Access for Complete PHY Status
- 10/100-Mb/s Packet BIST (Built in Self Test)
The number of applications requiring Ethernet connectivity continues to increase, driving Ethernet-enabled devices into harsher environments.
The DP83848Q-Q1 was designed to meet the challenge of these new applications with an extended temperature performance that goes beyond the typical Industrial temperature range. The DP83848Q-Q1 is a highly reliable, feature rich, robust device which meets IEEE 802.3u standards over an extended temperature range of –40°C to 105°C. This device is ideally suited for harsh environments such as automotive and transportation, wireless remote base stations, and industrial control applications.
The device offers enhanced ESD protection and the choice of an MII or RMII interface for maximum flexibility in MPU selection; all in a 40 pin WQFN package.
The DP83848Q-Q1 extends the leadership position of the PHYTER™ family of devices with a wide operating temperature range. The TI line of PHYTER transceivers builds on decades of Ethernet expertise to offer the high performance and flexibility that allows the end user an easy implementation tailored to meet these application needs.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ETHERNET-SW — 이더넷 PHY 드라이버 및 툴
텍사스 인스트루먼트의 이더넷 물리적 계층(PHY) 트랜시버용 드라이버는 직렬 관리 인터페이스(MDC/MDIO)를 통한 통신을 지원하여 PHY 레지스터를 구성하고 읽습니다. Linux 및 RTOS 드라이버는 github에서 찾을 수 있습니다.
USB-2-MDIO — USB-2-MDIO Tool v1.0
USB-2-MDIO 소프트웨어 툴을 사용하면 텍사스 인스트루먼트의 이더넷 PHY가 MDIO 상태 및 장치 제어 레지스터에 액세스할 수 있습니다. USB-2-MDIO 툴에는 경량 GUI로 인터페이싱하는 TI의 MSP430 ™ MCU용 LaunchPad™ 개발 키트가 포함되어 있습니다. LaunchPad 개발 키트는 버스에 연결된 PHY의 레지스터를 조작할 수 있는 MDIO 버스 컨트롤러를 구현합니다.
TIDA-00207 — EN55011 준수, 산업용 온도, 10/100Mbps 이더넷 PHY 브릭 레퍼런스 설계
이 이더넷 PHY 브릭 레퍼런스 설계를 통해 텍사스 인스트루먼트 고객은 EN5501 Class A EMI 요구 사항을 완벽하게 준수하는 TI의 산업용 이더넷 PHY 트랜시버 디바이스를 사용하여 신속하게 시스템을 설계하고 출시할 수 있습니다. 32비트 Cortex M4 프로세서 기반 컨트롤러 보드와 상호 작용하기 위해 50핀 인터페이스가 제공됩니다. 이 보드는 소형 폼팩터(2인치 x 3인치)로 설계되어 기존 제품에 쉽게 탑재할 수 있습니다.
이 레퍼런스 설계는 DP83848K 이더넷 PHY 트랜시버 장치의 고급 성능을 보여주며, (...)
TIDA-01425 — 이더넷 및 CAN을 지원하는 오토모티브 독립형 게이트웨이 레퍼런스 디자인
TIDA-01425는 게이트웨이 애플리케이션의 대역폭과 처리 성능을 높이는 데 중점을 둔 차량용 게이트웨이를 위한 서브시스템 레퍼런스 설계입니다. 이 설계는 대역폭을 늘리기 위해 이더넷 물리 계층 트랜시버(PHY)를 구현하고 차량용 프로세서를 통해 처리 능력을 향상시켜 차량용 게이트웨이가 더 빠른 속도로 더 많은 데이터를 전달할 수 있도록 합니다. 또한 설계 프로세스를 간소화하기 위해 차량 요구 사항 및 배기가스 사양을 염두에 두고 선택한 최대 전력 트리, CAN PHY 및 구성 요소를 갖춘 완전한 차량용 게이트웨이 설계를 위한 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RTA) | 40 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.