DP83848H
- Low-Power 3.3-V, 0.18-µm CMOS Technology
- Auto-MDIX for 10/100 Mb/s
- Energy Detection Mode
- 3.3-V MAC Interface
- RMII Rev. 1.2 Interface (configurable)
- MII Interface
- MII Serial Management Interface (MDC and MDIO)
- IEEE 802.3 Auto-Negotiation and Parallel Detection
- IEEE 802.3 ENDEC, 10BASE-T Transceivers and Filters
- IEEE 802.3 PCS, 100BASE-TX Transceivers and Filters
- Integrated ANSI X3.263 Compliant TP-PMD Physical Sub-Layer with Adaptive Equalization and Baseline Wander Compensation
- Error-Free Operation Beyond 137 Meters
- ESD Protection – Greater than 4 kV Human Body Model
- Configurable LED for Link and Activity (DP83848J/K)
- 25-MHz Clock Output (DP83848H/M/T)
- Single Register Access for Complete PHY Status
- 10/100 Mb/s Packet BIST (Built-in Self Test)
The DP83848x device addresses the quality, reliability and small form factor required for space sensitive applications in embedded systems.
The DP83848x offers performance far exceeding the IEEE specifications, with superior interoperability and industry leading performance beyond 137 meters of Cat-V cable. The DP83848x also offers Auto-MDIX to remove cabling complications. DP83848x has superior ESD protection, greater than 4 kV Human Body Model, providing extremely high reliability and robust operation, ensuring a high-level performance in all applications.
DP83848J/K offers two flexible LED indicators one for Link and the other for Speed. In addition, both MII and RMII are supported ensuring ease and flexibility of design.
The DP83848H/M/T incorporates a 25-MHz clock out that eliminates the need and hence the space and cost, of an additional clock source component.
The DP83848x is offered in small 6-mm × 6-mm WQFN 40-pin package and is ideal for industrial controls, building/factory automation, transportation, test equipment and wire-less base stations.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DP83848H-MAU-EK — DP83848H PHYTER® Mini – 극한 온도 단일 10 100 이더넷 트랜시버
DP83848I-POE-EK — PHYTER® 산업용 온도 단일 포트 10 100Mbs 이더넷 물리적 계층 트랜시버
DP83848 10/100Mbps 이더넷 PHYTER(물리적 계층) POE(Power over Ethernet) MAU(미디어 연결 유닛) EVK(평가 키트)에 관심을 가져 주셔서 감사합니다. PHYTER POE MAU는 완전한 기능을 갖춘 DP83848 보드로, POE 네트워크에 견고한 이더넷 네트워크 연결을 제공하는 회로를 지원합니다. POE 준수 PSE(Power Supply Equipment)에 연결된 경우 네트워크 케이블에서 전원을 끌어오도록 보드를 구성할 수 있습니다. 이 보드는 IEEE 802.3 준수 (...)
DP83848K-MAU-EK — 미니 LS, 단일 포트 및 10/100Mbs를 지원하는 PHYTER™ 이더넷 물리적 계층 트랜시버
The DP83848K addresses the quality, reliability and small form factor required for space-sensitive applications in embedded systems operating in the industrial temperature range. Use the DP83848K-MAU-EK to evaluate our mini-LS, industrial temperature, single-port, 10/100 Mbps PHYTER™ ethernet (...)
DIEP — Debug Interface for Ethernet PHYs (DIEP)
텍사스 인스트루먼트의 이더넷 물리적 계층(PHY) 트랜시버용 드라이버는 직렬 관리 인터페이스(MDC/MDIO)를 통한 통신을 지원하여 PHY 레지스터를 구성하고 읽습니다. Linux 및 RTOS 드라이버는 github에서 찾을 수 있습니다.
USB-2-MDIO — USB-2-MDIO Tool v1.0
USB-2-MDIO 소프트웨어 툴을 사용하면 텍사스 인스트루먼트의 이더넷 PHY가 MDIO 상태 및 장치 제어 레지스터에 액세스할 수 있습니다. USB-2-MDIO 툴에는 경량 GUI로 인터페이싱하는 TI의 MSP430 ™ MCU용 LaunchPad™ 개발 키트가 포함되어 있습니다. LaunchPad 개발 키트는 버스에 연결된 PHY의 레지스터를 조작할 수 있는 MDIO 버스 컨트롤러를 구현합니다.
TIDA-00207 — EN55011 준수, 산업용 온도, 10/100Mbps 이더넷 PHY 브릭 레퍼런스 설계
이 이더넷 PHY 브릭 레퍼런스 설계를 통해 텍사스 인스트루먼트 고객은 EN5501 Class A EMI 요구 사항을 완벽하게 준수하는 TI의 산업용 이더넷 PHY 트랜시버 디바이스를 사용하여 신속하게 시스템을 설계하고 출시할 수 있습니다. 32비트 Cortex M4 프로세서 기반 컨트롤러 보드와 상호 작용하기 위해 50핀 인터페이스가 제공됩니다. 이 보드는 소형 폼팩터(2인치 x 3인치)로 설계되어 기존 제품에 쉽게 탑재할 수 있습니다.
이 레퍼런스 설계는 DP83848K 이더넷 PHY 트랜시버 장치의 고급 성능을 보여주며, (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RTA) | 40 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.