ADS131B23
- Two simultaneous-sampling, 24-bit
ADCs (ADC1A, ADC1B) for current-shunt measurements
- Programmable full-scale
range:
- ±39mV to ±312.5mV
- Supports a wide range of shunt resistor values and current-measurement ranges
- Achieve high-accuracy current-shunt measurements
with:
- Offset error: ±1.5µV (max)
- Gain drift: 20ppm/°C (max)
- Programmable data rate: 500SPS to 64kSPS
- Digital overcurrent comparator per ADC with programmable thresholds for fast overcurrent detection
- Programmable full-scale
range:
- One multiplexed, 16-bit ADC
(ADC2A) for voltage and temperature measurements:
- 8 analog inputs
- Programmable full-scale range:±312.5mV to ±1.25V
- Channel sequencer
- Monitoring and diagnostic features to mitigate and detect random hardware faults
- Supply-voltage range: 2.9V to 16V
- SPI-compatible interface
- 9 GPIOs with PWM capability
The ADS131B23 is a fully integrated, high-voltage, battery-pack monitor for industrial battery management systems (BMS).
The ADS131B23 integrates two simultaneous-sampling, high-precision, 24-bit ADC channels (ADC1A, ADC1B) to redundantly measure battery current with high resolution and accuracy using an external shunt resistor. Two independent digital comparators enable fast overcurrent detection in parallel with the two ADCs.
An additional multiplexed, 16-bit ADC (ADC2A) is available to measure shunt temperature and other voltages in the system, such as battery-pack voltage, using external high-voltage resistor dividers. Shunt temperature is measured using an external temperature sensor, such as a thermistor or an analog output temperature sensor. ADC2A is equipped with a channel sequencer that automatically steps through the configured multiplexer inputs to reduce communication on the SPI.
The device integrates many monitoring and diagnostic features to mitigate and detect random hardware faults to aid in the development of functionally safe BMS.
Internal linear regulators with input ranges up to 16V support powering the device with unregulated DC/DC converters.
The ADS131B23 is offered in a 48-pin HTQFP package and is specified over the automotive temperature range of –40°C to +105°C.
관심 가지실만한 유사 제품
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | ADS131B23 High-Voltage, Battery-Pack Monitor With SPI and 3 ADC Channels for Voltage, Current, and Temperature Sensing datasheet (Rev. B) | PDF | HTML | 2025. 1. 31 | ||
| Circuit design | Precision, ±15V Power Supply Circuit from a +5V Source for High-Voltage Data Converters | PDF | HTML | 2025. 12. 4 | |||
| 애플리케이션 노트 | Digital Filter Types in Delta-Sigma ADCs (Rev. A) | PDF | HTML | 2023. 3. 29 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ADS131B26Q1EVM-PDK — 6-ADC-채널 고전압 SPI 배터리 팩 모니터링용 ADS131B26 성능 데모 키트
ADS131B26-Q1 평가 모듈(EVM) 성능 데모 키트(PDK)는 ADS131B26Q1EVM과 정밀 호스트 인터페이스(PHI) 컨트롤러 보드를 결합하는 완전한 평가 및 시연 플랫폼입니다. PHI 컨트롤러 보드를 사용하면 ADS131B26Q1EVM을 USB 포트를 통해 컴퓨터에 연결할 수 있으며 ADS131B26-Q1을 평가하도록 설계된 소프트웨어와 상호 작용합니다.
ADS131B2X-C-EXAMPLE-CODE — ADS131B2x example C code
ADC-DESIGN-CALC — Online design calculator tool for TI Precision ADCs
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTQFP (PHP) | 48 | Ultra Librarian |