ADC12DJ5200-SP
- Radiation Tolerance:
- Total Ionizing Dose (TID): 300krad (Si)
- Single Event Latchup (SEL): 120MeV-cm2/mg
- Single Event Upset (SEU) immune registers
- ADC core:
- 12-bit resolution
- Up to 10.4GSPS in single-channel mode
- Up to 5.2GSPS in dual-channel mode
- Performance specifications:
- Noise floor (–20dBFS, VFS =
1VPP-DIFF):
- Dual-channel mode: –151.8dBFS/Hz
- Single-channel mode: –154.4dBFS/Hz
- ENOB (dual channel, FIN = 2.4GHz): 8.6 Bits
- Noise floor (–20dBFS, VFS =
1VPP-DIFF):
- Buffered analog inputs with VCMI of
0V:
- Analog input bandwidth (–3dB): 8GHz
- Usable input frequency range: > 10GHz
- Full-scale input voltage (VFS, default): 0.8VPP
- Noiseless aperture delay (tAD) adjustment:
- Precise sampling control: 19fs Step
- Simplifies synchronization and interleaving
- Temperature and voltage invariant delays
- Easy-to-use synchronization features:
- Automatic SYSREF timing calibration
- Time stamp for sample marking
- JESD204C serial data interface:
- Maximum lane rate: 17.16Gbps
- Support for 64b/66b and 8b/10b encoding
- 8b/10b modes are JESD204B compatible
- Optional digital down-converters (DDC):
- 4x, 8x, 16x and 32x complex decimation
- Four independent 32-Bit NCOs per DDC
- Peak RF Input Power (Diff): +26.5dBm (+ 27.5dBFS, 560x fullscale power)
- Programmable FIR filter for equalization
- Power consumption: 4W
- Power supplies: 1.1V, 1.9V
The ADC12DJ5200-SP device is an RF-sampling, giga-sample, analog-to-digital converter (ADC) that can directly sample input frequencies from DC to above 10GHz. ADC12DJ5200-SP can be configured as a dual-channel, 5.2GSPS ADC or single-channel, 10.4GSPS ADC. Support of a useable input frequency range of up to 10GHz enables direct RF sampling of L-band, S-band, C-band, and X-band for frequency agile systems.
The ADC12DJ5200-SP uses a high-speed JESD204C output interface with up to 16 serialized lanes supporting up to 17.16Gbps line rate. Deterministic latency and multi-device synchronization is supported through JESD204C subclass-1. The JESD204C interface can be configured to trade-off line rate and number of lanes. Both 8b/10b and 64b/66b data encoding schemes are supported. 64b/66b encoding supports forward error correction (FEC) for improved bit error rates. The interface is backwards compatible with JESD204B receivers.
Innovative synchronization features, including noiseless aperture delay adjustment and SYSREF windowing, simplify system design for multichannel applications. Optional digital down converters (DDCs) are available to provide digital conversion to base-band and to reduce the interface rate. A programmable FIR filter allows on-chip equalization.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | ADC12DJ5200-SP 10.4GSPS Single-Channel or 5.2GSPS Dual-Channel, 12-bit, RF-Sampling Analog-to-Digital Converter (ADC) datasheet (Rev. C) | PDF | HTML | 2025. 4. 8 | |
| * | 방사능 및 안정성 보고서 | ADC12DJ5200-SHP Production Flow and Reliability Report | 2025. 3. 10 | ||
| Application brief | DLA Approved Optimizations for QML Products (Rev. C) | PDF | HTML | 2025. 6. 17 | ||
| 기술 문서 | How SHP in plastic packaging addresses 3 key space application design challenges | PDF | HTML | 2022. 10. 17 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ADC12DJ5200RFEVM — ADC12DJ5200RF - RF 샘플링 12비트 듀얼 5.2GSPS 또는 싱글 10.4GSPS ADC 평가 모듈
ADC12DJ5200RF-CALC — ADC12DJ5200RF 입력 네트워크 최대 눈금 계산 툴입니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| FCCSP (ALR) | 144 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.