Home Energiemanagement Linear- und Low-Dropout-Regler (LDO)

TPS7A80

AKTIV

Ultra-Low-Dropout-Spannungsregler mit hohem PSRR-Wert, niedrigem Ruhestrom und Aktivierung, 1 A

Eine neuere Version dieses Produkts ist verfügbar

Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung.
TPS7A91 AKTIV Rauscharmer, einstellbarer 1-A-Spannungsregler mit hohem PSRR-Wert und extrem niedriger Dropout-Span Next-generation product with lower noise and lower dropout.
TLV759P AKTIV Hochpräziser, einstellbarer Spannungsregler mit extrem geringem Dropout und 1 A, mit niedrigem IQ un 1-A single-channel adjustable-output LDO regulator with lower IQ for cost-sensitive applications.
TPS7A88 AKTIV Rauscharmer zweikanaliger Spannungsregler mit hohem PSRR-Wert, 1 A, mit extrem niedriger Dropout-Spa Dual-channel, low-noise, 1-A LDO regulator.

Produktdetails

Rating Catalog Vin (max) (V) 6.5 Vin (min) (V) 2.2 Iout (max) (A) 1 Output options Adjustable Output, Fixed Output Vout (max) (V) 6 Vout (min) (V) 0.8 Fixed output options (V) 1.2, 1.8, 3.3, 5 Noise (µVrms) 50 PSRR at 100 KHz (dB) 57 Iq (typ) (mA) 0.06 Features Enable Thermal resistance θJA (°C/W) 48 Load capacitance (min) (µF) 4.7 Regulated outputs (#) 1 Accuracy (%) 3 Dropout voltage (Vdo) (typ) (mV) 170 Operating temperature range (°C) -40 to 125
Rating Catalog Vin (max) (V) 6.5 Vin (min) (V) 2.2 Iout (max) (A) 1 Output options Adjustable Output, Fixed Output Vout (max) (V) 6 Vout (min) (V) 0.8 Fixed output options (V) 1.2, 1.8, 3.3, 5 Noise (µVrms) 50 PSRR at 100 KHz (dB) 57 Iq (typ) (mA) 0.06 Features Enable Thermal resistance θJA (°C/W) 48 Load capacitance (min) (µF) 4.7 Regulated outputs (#) 1 Accuracy (%) 3 Dropout voltage (Vdo) (typ) (mV) 170 Operating temperature range (°C) -40 to 125
VSON (DRB) 8 9 mm² (3 mm × 3 mm)
  • Low-Dropout 1-A Regulator With Enable
  • Adjustable Output Voltages: 0.8 V to 6 V
  • Fixed Output Voltages: 0.8 V to 6 V
  • Wide-Bandwidth High PSRR:
    • 63 dB at 1 kHz
    • 57 dB at 100 kHz
    • 38 dB at 1 MHz
  • Low Noise: (14 × VOUT ) µVRMS Typical (100 Hz to 100 kHz)
  • Stable with a 4.7-µF Ceramic Capacitor
  • Excellent Load/Line Transient Response
  • 3% Overall Accuracy (Over Load/Line/Temp)
  • Overcurrent and Overtemperature Protection
  • Very Low Dropout: 170 mV Typical at 1 A
  • 3-mm × 3-mm VSON-8 DRB Package
  • Low-Dropout 1-A Regulator With Enable
  • Adjustable Output Voltages: 0.8 V to 6 V
  • Fixed Output Voltages: 0.8 V to 6 V
  • Wide-Bandwidth High PSRR:
    • 63 dB at 1 kHz
    • 57 dB at 100 kHz
    • 38 dB at 1 MHz
  • Low Noise: (14 × VOUT ) µVRMS Typical (100 Hz to 100 kHz)
  • Stable with a 4.7-µF Ceramic Capacitor
  • Excellent Load/Line Transient Response
  • 3% Overall Accuracy (Over Load/Line/Temp)
  • Overcurrent and Overtemperature Protection
  • Very Low Dropout: 170 mV Typical at 1 A
  • 3-mm × 3-mm VSON-8 DRB Package

The TPS7A80 family of low-dropout linear regulators (LDOs) offer very high power-supply ripple rejection (PSRR) at the output. This LDO family uses an advanced BiCMOS process and a PMOSFET pass device to achieve very low noise, excellent transient response, and excellent PSRR performance.

The TPS7A80 family is stable with a 4.7-µF ceramic output capacitor, and uses a precision voltage reference and feedback loop to achieve a worst-case accuracy of 3% over all load, line, process, and temperature variations.

This family is fully specified over the temperature range of TJ = –40°C to +125°C, and is offered in a 3-mm × 3-mm, VSON-8 package with a thermal pad.

The TPS7A80 family of low-dropout linear regulators (LDOs) offer very high power-supply ripple rejection (PSRR) at the output. This LDO family uses an advanced BiCMOS process and a PMOSFET pass device to achieve very low noise, excellent transient response, and excellent PSRR performance.

The TPS7A80 family is stable with a 4.7-µF ceramic output capacitor, and uses a precision voltage reference and feedback loop to achieve a worst-case accuracy of 3% over all load, line, process, and temperature variations.

This family is fully specified over the temperature range of TJ = –40°C to +125°C, and is offered in a 3-mm × 3-mm, VSON-8 package with a thermal pad.

Herunterladen Video mit Transkript ansehen Video

Finden Sie im Bestand auf TI.com ähnliche Produkte

Produkte mit ähnlichen Spezifikationen, sortiert nach Verfügbarkeit im TI.com-Bestand.

Jetzt anzeigen

Ähnliche Produkte, die für Sie interessant sein könnten

Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung.
TLV757P AKTIV Hochpräziser Spannungsregler mit geringem Dropout (low dropout, LDO) mit niedrigem IQ, 1 A, mit Akti 1-A single-channel fixed-output LDO regulator with lower Iq for cost-sensitive applications

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 7
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TPS7A80 Low-Noise, Wide-Bandwidth, High PSRR, Low-Dropout 1-A Linear Regulator datasheet (Rev. J) PDF | HTML 18.01.2018
Whitepaper Parallel LDO Architecture Design Using Ballast Resistors PDF | HTML 14.12.2022
Whitepaper Comprehensive Analysis and Universal Equations for Parallel LDO's Using Ballast PDF | HTML 13.12.2022
Anwendungshinweis A Topical Index of TI LDO Application Notes (Rev. F) 27.06.2019
Auswahlhilfe Low Dropout Regulators Quick Reference Guide (Rev. P) 21.03.2018
Benutzerhandbuch TSW2200 Multi-Output Power Supply Board (Rev. A) 13.12.2012
Anwendungshinweis LDO Performance Near Dropout 08.10.2010

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LMK03318EVM — LMK03318EVM Extrem jitterarmer Takterzeugungs-EVM mit 1 PLLs, 8 Differenzausgängen und 2 Eingängen

Das Evaluierungsmodul LMK03318EVM bietet eine vollständige Taktgebungsplattform zur Evaluierung der 100-fs-RMS-Jitter-Leistung sowie der Pin-/Software-Konfigurationsmodi und Funktionen des Texas Instruments LMK03318 Ultra-Low-Jitter-Taktgenerators mit 1 PLL, 8 Ausgängen, 2 Eingängen und (...)

Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

LMK03328EVM — LMK03328EVM – EVM für extrem jitterarmen Takterzeuger mit 2 PLLs, 8 Differenzausgängen und 2 Eingäng

Das Evaluierungsmodul LMK03328EVM bietet eine vollständige Taktgebungsplattform zur Evaluierung der 100-fs-RMS-Jitter-Leistung sowie der Pin-/Software-Konfigurationsmodi und Funktionen des extrem jitterarmen Taktgenerators LMK03328 von Texas Instruments mit zwei PLLs, 8 Ausgängen, 2 Eingängen und (...)

Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

TPS7A8001DRBEVM — TPS7A8001 Rauscharmer 1-A-LDO-Linearregler mit hoher Bandbreite und hohem PSRR-Wert – Evaluierungsmo

The TPS7A8001DRBEVM is a fully assembled and tested circuit for evaluating the TPS7A8001 Low-Noise, High-Bandwidth PSRR, Low-Dropout 1A Linear Regulator in the DRB (3mm x 3mm SON-8) package.
Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Simulationsmodell

TPS7A8001 PSpice Transient Model (Rev. A)

SBVM298A.ZIP (23 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS7A8001 Unencrypted PSpice Transient Model

SBVM880.ZIP (1 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS7A8012 PSpice Transient Model

SBVM884.ZIP (40 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS7A8012 Unencrypted PSpice Transient Model

SBVM888.ZIP (2 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS7A8018 PSpice Transient Model

SBVM890.ZIP (40 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS7A8018 Unencrypted PSpice Transient Model

SBVM886.ZIP (2 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS7A8033 PSpice Transient Model

SBVM883.ZIP (40 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS7A8033 Unencrypted PSpice Transient Model

SBVM887.ZIP (2 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS7A8050 PSpice Transient Model

SBVM889.ZIP (40 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS7A8050 Unencrypted PSpice Transient Model

SBVM885.ZIP (2 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Referenzdesign

TIDA-00068 — Basisstation-Transceiver mit DPD-Rückkopplungspfad

The design is for a small cell base station development platform.  It provides two real receive paths, two complex transmit paths, and a shared real feedback path.  This design has macro basestation performance, but with small cell base station footprint.  The current design handles (...)

Unterstützte Produkte und Hardware
Referenzdesign

TIDA-00074 — Breitbandige HF-Digital-Komplexempfänger-Feedback-Signalkette

This is a wideband complex-receiver reference design and evaluation platform that is ideally suited for use as a feedback receiver for transmitter digital predistortion. The EVM signal chain is ideal for high intermediate-frequency (IF) complex-feedback applications and contains a complex (...)

Unterstützte Produkte und Hardware
Referenzdesign

TIDA-00076 — Messen von ACPR (Adjacent Channel Power Ratio, Nachbarkanalleistung) und Error Vector Magnitude (%EV

This reference design discusses the use of the TSW3085EVM with the TSW3100 pattern generator to test adjacent channel power ratio (ACPR) and error vector magnitude (EVM) measurements of LTE baseband signals. By using the TSW3100 LTE GUI, patterns are loaded into the TSW3085EVM which is comprised of (...)

Unterstützte Produkte und Hardware
Referenzdesign

TIDA-00092 — Optimieren des LMH6554 zum Ansteuern von Hochgeschwindigkeits-A/D-Wandlern

This reference design shows the ability of the high-speed amplifier, LMH6554, to perform single-ended to differential conversion to drive high-speed analog-to-digital converters (ADCs) while maintaining excellent noise and distortion performance. Performance versus input frequency is shown for both (...)

Unterstützte Produkte und Hardware
Referenzdesign

TIDA-00093 — Referenzdesign zur Optimierung des THS4509 zum Ansteuern von Highspeed-A/D-Wandlern

This reference design shows the ability of the high-speed amplifier, THS4509 to perform single-ended to differential conversion to drive high-speed analog-to-digital converters (ADCs) while maintaining excellent noise and distortion performance. Performance versus input frequency is shown for both (...)

Unterstützte Produkte und Hardware
Referenzdesign

TIDA-00094 — Referenzdesign für einen 250-MSPS-Digitalisierer mit einem Verstärker mit variabler Verstärkung

This reference design shows a quad channel, 14-bit, 250-Msps digitizer with wide input range using the LMH6881 programmable differential amplifier and ADS4449 quad-channel, 14-bit, 250-Msps ADC. This combination allows an input voltage range of approximately 1 Vpp to 100 uVpp (4 dBm to -75 dBm) (...)

Unterstützte Produkte und Hardware
Referenzdesign

TIDA-00507 — Hohe Leistungsdichte von 9 bis 15 V im Intel Atom C2000 SoC-VCCP und VNN-Rail für Mikroserver – Refe

The TI TPS53625 VR12 reference design (TIDA-00507), supporting Intel® Atom™ C2000, uses TI's driverless PWM architecture with TI power stages for high power density, high efficiency, and low component count while meeting Intel voltage tolerance requirements with low ripple and high (...)

Unterstützte Produkte und Hardware
Referenzdesign

TIDA-010011 — Referenzdesign für hocheffiziente Stromversorgungsarchitektur für Schutzrelais-Prozessormodul

Dieses Referenzdesign zeigt verschiedene Stromversorgungsarchitekturen zur Erzeugung von mehreren Spannungsschienen für ein Anwendungsprozessormodul, das einen Laststrom > 1 A und einen hohen Wirkungsgrad benötigt. Die erforderliche Stromversorgung wird über einen 5-, 12- oder 24-V-DC-Eingang von (...)
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VSON (DRB) 8 Ultra Librarian

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos