Home Energiemanagement DC/DC-Schaltregler DC/DC-Wandler

TPS50601A-SP

AKTIV

Radiation-hardened, QML-V, 3V to 7V input, 6A synchronous step-down converter

Produktdetails

Rating Space Topology Buck Iout (max) (A) 6 Vin (max) (V) 7 Vin (min) (V) 3 Vout (max) (V) 6.7 Vout (min) (V) 0.804 Features Enable, Frequency synchronization, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable Control mode current mode Operating temperature range (°C) -55 to 125 Iq (typ) (A) 0.005 Duty cycle (max) (%) 100
Rating Space Topology Buck Iout (max) (A) 6 Vin (max) (V) 7 Vin (min) (V) 3 Vout (max) (V) 6.7 Vout (min) (V) 0.804 Features Enable, Frequency synchronization, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable Control mode current mode Operating temperature range (°C) -55 to 125 Iq (typ) (A) 0.005 Duty cycle (max) (%) 100
CFP (HKH) 20 93.726 mm² (— mm × — mm) DIESALE (KGD) See data sheet
  • 5962-10221:
    • Radiation hardened up to TID 100 krad(Si)
    • ELDRS free 100 krad(Si) – 10 mrad(Si)/s
    • Single lhup (SEL) Immune to
      LET = 75 MeV-cm2/mg
    • SEB and SEGR immune to 75 MeV-cm2/mg, SOA Curve Available
    • SET/SEFI Cross-section plot available
  • peak efficiency: 96.6% (VO = 3.3 V)
  • Integrated 58-mΩ/50-mΩ MOSFETs
  • Power rail: 3 to 7 V on VIN
  • 6-A Maximum output current
  • Flexible switching frequency options:
    • 100-kHz to 1-MHz Adjustable internal oscillator
    • External sync capability: 100 kHz to 1 MHz
    • Sync pin can be configured as a 500-kHz output for master/slave applications
  • 0.804-V ±1.5% Voltage reference overtemperature, radiation, and line and load regulation
  • Monotonic start-up into prebiased outputs
  • Adjustable soft start through external capacitor
  • Input enable and power-good output for power sequencing
  • Power good output monitor for undervoltage and overvoltage
  • Adjustable input undervoltage lockout (UVLO)
  • 20-Pin Ultra-small, thermally-enhanced ceramic flatpack package (hkh) for space applications
  • 5962-10221:
    • Radiation hardened up to TID 100 krad(Si)
    • ELDRS free 100 krad(Si) – 10 mrad(Si)/s
    • Single lhup (SEL) Immune to
      LET = 75 MeV-cm2/mg
    • SEB and SEGR immune to 75 MeV-cm2/mg, SOA Curve Available
    • SET/SEFI Cross-section plot available
  • peak efficiency: 96.6% (VO = 3.3 V)
  • Integrated 58-mΩ/50-mΩ MOSFETs
  • Power rail: 3 to 7 V on VIN
  • 6-A Maximum output current
  • Flexible switching frequency options:
    • 100-kHz to 1-MHz Adjustable internal oscillator
    • External sync capability: 100 kHz to 1 MHz
    • Sync pin can be configured as a 500-kHz output for master/slave applications
  • 0.804-V ±1.5% Voltage reference overtemperature, radiation, and line and load regulation
  • Monotonic start-up into prebiased outputs
  • Adjustable soft start through external capacitor
  • Input enable and power-good output for power sequencing
  • Power good output monitor for undervoltage and overvoltage
  • Adjustable input undervoltage lockout (UVLO)
  • 20-Pin Ultra-small, thermally-enhanced ceramic flatpack package (hkh) for space applications

The TPS50601A-SP is a radiation hardened, 7-V, 6-A synchronous step-down converter, which is optimized for small designs through high efficiency and integrating the high-side and low-side MOSFETs. Further space savings are achieved through current mode control, which reduces component count, and a high switching frequency, reducing the inductor’s footprint. The devices are offered in an ultra small, thermally enhanced 20-pin ceramic flatpack package.

The output voltage startup ramp is controlled by the SS/TR pin which allows operation as either a stand alone power supply or in tracking situations. Power sequencing is also possible by correctly configuring the enable and the open drain power good pins. In addition, the TPS50601A-SP can be configured in master-slave mode to provide up to 12-A of output current.

Cycle-by-cycle current limiting on the high-side FET protects the device in overload situations and is enhanced by a low-side sourcing current limit which prevents current runaway. There is also a low-side sinking current limit which turns off the low-side MOSFET to prevent excessive reverse current. Thermal shutdown disables the part when die temperature exceeds thermal shutdown temperature.

The TPS50601A-SP is a radiation hardened, 7-V, 6-A synchronous step-down converter, which is optimized for small designs through high efficiency and integrating the high-side and low-side MOSFETs. Further space savings are achieved through current mode control, which reduces component count, and a high switching frequency, reducing the inductor’s footprint. The devices are offered in an ultra small, thermally enhanced 20-pin ceramic flatpack package.

The output voltage startup ramp is controlled by the SS/TR pin which allows operation as either a stand alone power supply or in tracking situations. Power sequencing is also possible by correctly configuring the enable and the open drain power good pins. In addition, the TPS50601A-SP can be configured in master-slave mode to provide up to 12-A of output current.

Cycle-by-cycle current limiting on the high-side FET protects the device in overload situations and is enhanced by a low-side sourcing current limit which prevents current runaway. There is also a low-side sinking current limit which turns off the low-side MOSFET to prevent excessive reverse current. Thermal shutdown disables the part when die temperature exceeds thermal shutdown temperature.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie der verglichene Baustein.
TPS7H4002-SP AKTIV Radiation-hardened, QML-V, 3V to 5.5V input, 3A, synchronous step-down converter Radiation-hardened-assured (RHA) option with lower current (3-A) capabilities.
TPS7H4001-SP AKTIV Radiation-hardened, QML-P and QML-V, 3V to 7V input 18A synchronous step-down converter 18-A product has the ability to parallel devices together to scale the solution up to 72 A.

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 27
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TPS50601A-SP Radiation Hardened 3-V to 7-V Input, 6-A Synchronous Buck Converter datasheet (Rev. D) PDF | HTML 21.02.2019
* Strahlungs- und Zuverlässigkeitsbericht TPS50601A-SP Total Ionizing Dose (TID) Radiation Report (Rev. B) 30.05.2019
* Strahlungs- und Zuverlässigkeitsbericht TPS50601A-SP Single-event Effects (SEE) Test Report (Rev. A) 05.02.2019
* Strahlungs- und Zuverlässigkeitsbericht TPS50601A-SP Neutron Displacement Damage (NDD) Characterization Report (Rev. A) 24.07.2018
* SMD TPS50601A-SP SMD 5962-10221 21.06.2016
Auswahlhilfe TI Space Products (Rev. L) 27.03.2026
Anwendungshinweis Hermetic Package Reflow Profiles, Termination Finishes, and Lead Trim and Form (Rev. A) PDF | HTML 05.11.2025
Application brief DLA Approved Optimizations for QML Products (Rev. C) PDF | HTML 17.06.2025
Anwendungshinweis Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. B) PDF | HTML 10.06.2025
Weitere Dokumente TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. B) 20.02.2025
Anwendungshinweis Using Space Grade Power Components to Power AMD Kintex XQRKU060 FPGA PDF | HTML 08.11.2023
Anwendungshinweis Using Space Grade Power Components to Power Microchip RTAX-S/SL FPGA PDF | HTML 29.09.2023
Anwendungshinweis Using Space Grade Power Components to Power Microchip RT PolarFire FPGA PDF | HTML 20.09.2023
Anwendungshinweis QML flow, its importance, and obtaining lot information (Rev. C) 30.08.2023
Whitepaper Space Power Supply for the STAR-Tiger SpaceFibre Routing Switch PDF | HTML 27.07.2023
Anwendungshinweis Space Grade Power Solution for Microsemi RTG4 PDF | HTML 02.05.2023
Anwendungshinweis TI Space Rated Power Solution for Microsemi® RTG4™ FPGA (Rev. B) PDF | HTML 19.01.2023
Anwendungshinweis Single-Event Effects Confidence Interval Calculations (Rev. A) PDF | HTML 19.10.2022
Application brief Why Radiation Hardness Matters for Point-of-Load Converters PDF | HTML 13.01.2022
Anwendungshinweis DLA Standard Microcircuit Drawings (SMD) and JAN Part Numbers Primer 21.08.2020
Benutzerhandbuch TPS50601A-SP Worst Case Analysis Unencrypted PSpice Average Model User's Guide (Rev. A) PDF | HTML 18.06.2020
Anwendungshinweis Failure Containment in Spacecraft Point-of-Load Power Supplies PDF | HTML 30.04.2020
Anwendungshinweis TPS50601x-SP Comparison Guide (Rev. A) PDF | HTML 06.04.2020
Anwendungshinweis TPS50601A-SP Small Form Factor Buck Converter 01.04.2020
Technischer Artikel 4 trends in space-grade power management PDF | HTML 12.02.2020
E-book Radiation Handbook for Electronics (Rev. A) 21.05.2019
Technischer Artikel When failure isn’t an option: power up your next satellite with integrated functio PDF | HTML 30.04.2019

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

ADC12DJ3200EVMCVAL — ADC12DJ3200QML-SP-Evaluierungsmodul

Das ADC12DJ3200 Evaluierungsmodul (EVM) wurde entwickelt, um die ADC12DJ3200QML-SP hochgeschwindigkeits Analog-Digital-Wandler (ADCs) zu bewerten. Das Evaluierungsmodul ist mit dem ADC12DJ3200QML-SP bestückt, einem hochbelastbaren 12-Bit, Dual-Channel 4 GSPS oder Single-Channel 8 GSPS ADC mit (...)
Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

TPS50601ASPEVM-D — TPS50601A-SP Evaluierungsmodul mit zwei Betriebsarten

Der TPS50601A-SP-Baustein ist ein strahlungsfester synchroner Abwärtswandler für 7 V/6 A, der durch seinen hohen Wirkungsgrad und die Integration von Highside und Low-Side-MOSFETs für kleine Designs optimiert wurde.  Der Baustein bietet eine optimale elektrische und Strahlungsleistung in einem sehr (...)

Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

TPS50601ASPEVM-S — TPS50601A-SP Einzel-Betrieb Evaluierungsmodul

Der TPS50601A-SP-Baustein ist ein strahlungsfester synchroner Abwärtswandler mit 6,3 V/6 A, der durch seinen hohen Wirkungsgrad und die Integration von High- und Low-Side-MOSFETs für kleine Designs optimiert wurde. Weitere Platzeinsparungen werden durch eine Strommodussteuerung für geringere (...)
Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

TSW12D1620EVM-CVAL — ,ADC12D1620QML-SP Evaluierungsmodul, 300 krad, 12 Bit, 1,6 GSPS zweifach oder 3,2 GSPS ADC einzeln

Das TSW12D1620EVM-CVAL ist ein Evaluierungsmodul (EVM) für 1,5-GHz-Breitband-Empfänger, das Keramikmodelle des Verstärkers, Analog-zu-Digital-Wandlers (ADC), Taktung, Temperatursensor, Mikrocontroller und Stromversorgungslösung umfasst. Die Platine eignet sich am besten für die Digitalisierung von (...)

Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Entwicklungskit

ALPHA-XILINX-KU060-SPACE — Alpha Data®-Platine für Xilinx® Kintex® UltraScale™ XQRKU060-FPGA mit TI-Stromversorgungslösung

This is a development kit for the Xilinx® XQRKU060 FPGA with industrial -1 speed grade. ADA-SDEV-KIT2 has a modular board design with a XRTC-compatible configuration module, two FMC connectors, DDR3 DRAM, system monitoring, and space-grade TI power management and temperature-sensing solutions.
Unterstützte Produkte und Hardware
Third-party accessory

STARD-3P-STAR-TIGER — STAR-Dundee STAR-Tiger-Stromversorgung für SpaceFibre unter Verwendung von strahlungsfesten Stromver

STAR-Tiger ist ein hochleistungsfähiger SpaceFibre-Routing-Switch, Teil des Hi-SIDE-Projekts der Europäischen Union und ausgezeichnet mit dem „Innovation in Space Award“ des European Space Forum. Die Stromversorgungsplatine in der STAR-Tiger-Einheit speist die primären Stromschienen für das für die (...)

Unterstützte Produkte und Hardware
Simulationsmodell

TPS50601A SIMPLIS Model

SLVME37.ZIP (19 KB) - SIMPLIS-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS50601A-SP PSpice Model (Rev. A)

SLVMCL4A.ZIP (20 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS50601A-SP PSpice Transient Model (Rev. C)

SLVMCL3C.ZIP (289 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS50601A-SP TINA-TI Average Reference Design

SLVMCM4.TSC (584 KB) - TINA-TI-Referenzdesign
Unterstützte Produkte und Hardware
Simulationsmodell

TPS50601A-SP TINA-TI Average Spice Model

SLVMCM3.ZIP (5 KB) - TINA-TI Spice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS50601A-SP TINA-TI Startup Transient Reference Design

SLVMCN2.TSC (855 KB) - TINA-TI-Referenzdesign
Unterstützte Produkte und Hardware
Simulationsmodell

TPS50601A-SP TINA-TI Steady State Transient Reference Design

SLVMCN1.TSC (855 KB) - TINA-TI-Referenzdesign
Unterstützte Produkte und Hardware
Simulationsmodell

TPS50601A-SP TINA-TI Transient Spice Model

SLVMCN0.ZIP (14 KB) - TINA-TI Spice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS50601A-SP Worst Case Analysis Unencrypted PSpice Average Model

SLVMDC2.ZIP (43 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Berechnungstool

SLVRBG4 — TPS50601A-SP Buck Converter Calculator

Unterstützte Produkte und Hardware
Referenzdesign

TIDA-010191 — Referenzdesign für weltraumtaugliche Mehrkanal-Taktung mit JESD204B 15 GHz

Phased-Array-Antennen und digitale Strahlformung sind Schlüsseltechnologien, die die Leistung zukünftiger Radarsysteme für die Raumfahrt und die Breitband-Satellitenkommunikation steigern werden. Im Gegensatz zu analoger Strahlformung erfordert digitale Strahlformung in der Regel einen Satz von (...)
Unterstützte Produkte und Hardware
Referenzdesign

TIDA-070001 — Referenzdesign für Point-of-Load (POL) mit 3 bis 7 VIN und redundanten eFuse-Eingängen für OCP

Redundanz wird häufig in Raumfahrtanwendungen eingesetzt, um die Zuverlässigkeit zu verbessern. Dieses Referenzdesign zeigt, wie Redundanz am Eingang einer Point-of-Load(POL)-Stromversorgung mit zwei strahlungsfesten TPS7H2201-SP-eFuse-Lastschaltern implementiert werden kann. Die Verwendung von (...)
Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
CFP (HKH) 20 Ultra Librarian
DIESALE (KGD) Ultra Librarian

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videoreihe

Alle Videos anzeigen

Videos