Home Energiemanagement DC/DC-Schaltregler DC/DC-Wandler

TPS7H4001-SP

AKTIV

Radiation-hardened, QML-P and QML-V, 3V to 7V input 18A synchronous step-down converter

TPS7H4001-SP

AKTIV

Produktdetails

Rating Space Topology Buck Iout (max) (A) 18 Vin (max) (V) 7 Vin (min) (V) 3 Vout (max) (V) 6.65 Vout (min) (V) 0.604 Features Enable, Frequency synchronization, Overcurrent protection, Power good, Prebias startup, Soft-start adjustable, Synchronous rectification, Tracking, UVLO adjustable Control mode current mode Operating temperature range (°C) -55 to 125 Iq (typ) (A) 0.004 Duty cycle (max) (%) 100
Rating Space Topology Buck Iout (max) (A) 18 Vin (max) (V) 7 Vin (min) (V) 3 Vout (max) (V) 6.65 Vout (min) (V) 0.604 Features Enable, Frequency synchronization, Overcurrent protection, Power good, Prebias startup, Soft-start adjustable, Synchronous rectification, Tracking, UVLO adjustable Control mode current mode Operating temperature range (°C) -55 to 125 Iq (typ) (A) 0.004 Duty cycle (max) (%) 100
DIESALE (KGD) See data sheet mm² (— mm × — mm) CFP (HKY) 34 164.5158 mm² (21.59 mm × 7.62 mm) HTSSOP (DDW) 44 113.4 mm² (14 mm × 8.1 mm)
  • Radiation performance:
    • Radiation-hardness-assured up to TID 100 krad(Si)
    • SEL, SEB, and SEGR immune to LET = 75 MeV-cm 2/mg
    • SET and SEFI characterized up to LET = 75 MeV-cm 2/mg
  • Peak efficiency: 95.5% (V O = 1 V at 100 kHz)
  • Power rail: 3 V to 7 V on VIN
  • Flexible switching frequency options:
    • 100-kHz to 1-MHz adjustable internal oscillator
    • External sync capability: 100-kHz to 1-MHz
    • SYNC pins can be configured as 500-kHz clocks at 90° out of phase to parallel up to 4 devices
  • 0.6-V ±1.5% voltage reference over temperature, radiation, and line and load regulation for CDFP, KGD (known good die), and HTSSOP (QMLP) options
  • 0.6-V ±1.7% voltage reference over temperature, radiation, and line and load regulation for HTSSOP (SHP) option
  • Monotonic start-up into prebiased outputs
  • Adjustable slope compensation and soft-start
  • Adjustable input enable and power-good output for power sequencing
  • Radiation performance:
    • Radiation-hardness-assured up to TID 100 krad(Si)
    • SEL, SEB, and SEGR immune to LET = 75 MeV-cm 2/mg
    • SET and SEFI characterized up to LET = 75 MeV-cm 2/mg
  • Peak efficiency: 95.5% (V O = 1 V at 100 kHz)
  • Power rail: 3 V to 7 V on VIN
  • Flexible switching frequency options:
    • 100-kHz to 1-MHz adjustable internal oscillator
    • External sync capability: 100-kHz to 1-MHz
    • SYNC pins can be configured as 500-kHz clocks at 90° out of phase to parallel up to 4 devices
  • 0.6-V ±1.5% voltage reference over temperature, radiation, and line and load regulation for CDFP, KGD (known good die), and HTSSOP (QMLP) options
  • 0.6-V ±1.7% voltage reference over temperature, radiation, and line and load regulation for HTSSOP (SHP) option
  • Monotonic start-up into prebiased outputs
  • Adjustable slope compensation and soft-start
  • Adjustable input enable and power-good output for power sequencing

The TPS7H4001-SP is a radiation-hardness-assured, 7-V, 18-A synchronous buck converter with integrated low-resistance high-side and low-side MOSFETs. High efficiency and reduced component count are achieved through current mode control.

The output voltage start-up ramp is controlled by the SS/TR pin which allows operation as either a stand alone power supply or in tracking situations. Power sequencing is possible by correctly configuring the enable and the power good pins. The TPS7H4001-SP can be configured in primary-secondary mode and with the SYNC2 pin, four devices can be configured in parallel without an external clock.

Cycle-by-cycle current limiting on the high-side FET protects the device in overload situations and is enhanced by a low-side sourcing current protection which prevents current runaway. Thermal shutdown disables the part when die temperature exceeds thermal limit.

The TPS7H4001-SP is a radiation-hardness-assured, 7-V, 18-A synchronous buck converter with integrated low-resistance high-side and low-side MOSFETs. High efficiency and reduced component count are achieved through current mode control.

The output voltage start-up ramp is controlled by the SS/TR pin which allows operation as either a stand alone power supply or in tracking situations. Power sequencing is possible by correctly configuring the enable and the power good pins. The TPS7H4001-SP can be configured in primary-secondary mode and with the SYNC2 pin, four devices can be configured in parallel without an external clock.

Cycle-by-cycle current limiting on the high-side FET protects the device in overload situations and is enhanced by a low-side sourcing current protection which prevents current runaway. Thermal shutdown disables the part when die temperature exceeds thermal limit.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie der verglichene Baustein.
TPS7H4011-SP AKTIV Radiation-hardened, QML-P and QML-V, 4.5V to 14V input 12A synchronous step-down converter Supports wider input voltage range and a few more features, while supporting 12A output current

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 30
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TPS7H4001-SP Radiation-Hardness-Assured 3-V to 7-V Input 18-A Synchronous Buck Converter datasheet (Rev. D) PDF | HTML 08.05.2023
* Strahlungs- und Zuverlässigkeitsbericht TPS7H4001-SP (TPS7H4001MDDWTSHP) Total Ionizing Dose (TID) Radiation Report (Rev. A) PDF | HTML 30.05.2023
* Strahlungs- und Zuverlässigkeitsbericht TPS7H4001-SP Single-Event Effects (SEE) Test Report (Rev. C) PDF | HTML 16.05.2023
* Strahlungs- und Zuverlässigkeitsbericht TPS7H4001-QMLP Total Ionizing Dose (TID) Report 16.03.2023
* Strahlungs- und Zuverlässigkeitsbericht TPS7H4001-SHP Production Flow and Reliability Report 13.01.2023
* Strahlungs- und Zuverlässigkeitsbericht TPS7H4001-SP QMLV Total Ionizing Dose (TID) Radiation Report 25.11.2020
* Strahlungs- und Zuverlässigkeitsbericht TPS7H4001-SP Neutron Displacement Damage Characterization 27.04.2020
* SMD TPS7H4001-SP SMD 5962-18205 08.12.2020
Auswahlhilfe TI Space Products (Rev. L) 27.03.2026
Anwendungshinweis Hermetic Package Reflow Profiles, Termination Finishes, and Lead Trim and Form (Rev. A) PDF | HTML 05.11.2025
Application brief DLA Approved Optimizations for QML Products (Rev. C) PDF | HTML 17.06.2025
Anwendungshinweis Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. B) PDF | HTML 10.06.2025
Weitere Dokumente TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. B) 20.02.2025
Anwendungshinweis Using Space Grade Power Components to Power AMD Kintex XQRKU060 FPGA PDF | HTML 08.11.2023
Anwendungshinweis Using Space Grade Power Components to Power Microchip RT PolarFire FPGA PDF | HTML 20.09.2023
Anwendungshinweis QML flow, its importance, and obtaining lot information (Rev. C) 30.08.2023
Whitepaper Space Power Supply for the STAR-Tiger SpaceFibre Routing Switch PDF | HTML 27.07.2023
Anwendungshinweis Space Grade Power Solution for Microsemi RTG4 PDF | HTML 02.05.2023
Anwendungshinweis TI Space Rated Power Solution for Microsemi® RTG4™ FPGA (Rev. B) PDF | HTML 19.01.2023
Anwendungshinweis Single-Event Effects Confidence Interval Calculations (Rev. A) PDF | HTML 19.10.2022
Application brief Why Radiation Hardness Matters for Point-of-Load Converters PDF | HTML 13.01.2022
Weitere Dokumente Radiation Evaluation of the TPS7H4001-SP 18 Amps Buck Converte 18.07.2021
Whitepaper Powering a New Era of High-Performance Space-Grade Xilinx FPGAs PDF | HTML 29.03.2021
Benutzerhandbuch TPS7H4001-SP Worst Case Analysis Model PDF | HTML 03.03.2021
Anwendungshinweis DLA Standard Microcircuit Drawings (SMD) and JAN Part Numbers Primer 21.08.2020
Anwendungshinweis How to Modify a 4-Channel TPS7H4001QEVM-CVAL into a 3-Channel EVM PDF | HTML 30.06.2020
Anwendungshinweis How to Modify a 4-Channel TPS7H4001QEVM-CVAL into a 2-Channel EVM (Rev. A) PDF | HTML 22.06.2020
Anwendungshinweis How to Modify a 4-Channel TPS7H4001QEVM-CVAL Into a 1-Channel EVM PDF | HTML 14.05.2020
Benutzerhandbuch TSP7H4001-SP Unencrypted PSpice Average/Transient Model User's Guide 30.04.2020
E-book Radiation Handbook for Electronics (Rev. A) 21.05.2019

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS7H4001EVM-CVAL — Evaluierungsmodul für TPS7H4001, 1-Kanal, 18 A, Synchron-Abwärtswandler

Das TPS7H4001EVM-CVAL-Evaluierungsmodul (EVM) demonstriert, wie der Abwärtswandler TPS7H4001-SP Point-of-Load (POL)-Ströme von bis zu 18 A für Anwendungen bereitstellen kann, bei denen eine enge Regeltoleranz zwingend erforderlich ist, wie z. B. die Stromversorgung von ASICs und FPGAs.

Benutzerhandbuch: PDF
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

TPS7H4001QEVM-CVAL — Evaluierungsmodul für TPS7H4001 für 4 Kanäle, 72 A, Synchron-Abwärtswandler

Das TPS7H4001QEVM-CVAL-Evaluierungsmodul (EVM) demonstriert, wie vier TPS7H4001-SP-Abwärtswandler im Master/Slave-Modus konfiguriert werden können, um eine geregelte Stromschiene mit Laststrom bis zu 72 A bereitzustellen und typische ASIC- und FPGA-Anwendungen zu unterstützen.

Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Evaluierungsplatine

TPS7H4003EVM — TPS7H4003 Synchroner 18-A-Abwärtswandler, 3 V bis 7 V Eingangsspannung – Evaluierungsmodul

Das TPS7H4003-Evaluierungsmodul (EVM) demonstriert, wie der Abwärtswandler TPS7H4003-SEP eine geregelte Stromschiene mit Laststrom bis zu 18 A bereitstellen kann, um typische anwendungsspezifische integrierte Schaltkreise (ASIC) und feldprogrammierbare Gate-Arrays (FPGA) zu unterstützen.
Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Entwicklungskit

ALPHA-XILINX-KU060-SPACE — Alpha Data®-Platine für Xilinx® Kintex® UltraScale™ XQRKU060-FPGA mit TI-Stromversorgungslösung

This is a development kit for the Xilinx® XQRKU060 FPGA with industrial -1 speed grade. ADA-SDEV-KIT2 has a modular board design with a XRTC-compatible configuration module, two FMC connectors, DDR3 DRAM, system monitoring, and space-grade TI power management and temperature-sensing solutions.
Unterstützte Produkte und Hardware
Third-party accessory

STARD-3P-STAR-TIGER — STAR-Dundee STAR-Tiger-Stromversorgung für SpaceFibre unter Verwendung von strahlungsfesten Stromver

STAR-Tiger ist ein hochleistungsfähiger SpaceFibre-Routing-Switch, Teil des Hi-SIDE-Projekts der Europäischen Union und ausgezeichnet mit dem „Innovation in Space Award“ des European Space Forum. Die Stromversorgungsplatine in der STAR-Tiger-Einheit speist die primären Stromschienen für das für die (...)

Unterstützte Produkte und Hardware
Simulationsmodell

TPS7H4001 SIMPLIS Model

SLVME45.ZIP (19 KB) - SIMPLIS-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS7H4001-SP PSpice Model (Rev. C)

SLVMD62C.ZIP (28 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS7H4001-SP PSpice Transient Model (Rev. B)

SLVMD63B.ZIP (37 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS7H4001-SP PSpice Worst-Case Analysis (WCA) Model (Rev. A)

SLVMDJ2A.ZIP (21 KB) - PSpice-Modell
Unterstützte Produkte und Hardware
Simulationsmodell

TPS7H4001-SP TINA Average Reference Design (Rev. A)

SLVMD56A.ZIP (144 KB) - TINA-TI-Referenzdesign
Unterstützte Produkte und Hardware
Simulationsmodell

TPS7H4001-SP TINA Transient Reference Design (Rev. A)

SLVMD57A.ZIP (168 KB) - TINA-TI-Referenzdesign
Unterstützte Produkte und Hardware
Berechnungstool

SLVRBF7 — TPS7H4001-SP Buck Converter Calculator

Unterstützte Produkte und Hardware
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
DIESALE (KGD) Ultra Librarian
CFP (HKY) 34 Ultra Librarian
HTSSOP (DDW) 44 Ultra Librarian

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videoreihe

Alle Videos anzeigen

Videos