Startseite Energiemanagement DC/DC switching regulators DC/DC controllers

TPS40195

AKTIV

4,5-V- bis 20-V-, 20-A-Synchron-Abwärtsregler mit Power-Good und Synchronisierung

Eine neuere Version dieses Produkts ist verfügbar

Ähnliche Funktionalität wie verglichener Baustein
TPS543B22 AKTIV Synchroner SWIFT™-Abwärtswandler, 4 bis 18 V Eingangsspannung, 20 A, erweiterter Strommodus Higher switching frequency and integrated FETs for smaller solution size

Produktdetails

Rating Catalog Topology Buck Iout (max) (A) 20 Vin (max) (V) 20 Vin (min) (V) 4.5 Vout (max) (V) 17 Vout (min) (V) 0.591 Control mode Voltage mode Features Enable, Power good, Prebias startup, Synchronous rectification Duty cycle (max) (%) 85 Iq (typ) (A) 0.004 Number of phases 1 Operating temperature range (°C) -40 to 85
Rating Catalog Topology Buck Iout (max) (A) 20 Vin (max) (V) 20 Vin (min) (V) 4.5 Vout (max) (V) 17 Vout (min) (V) 0.591 Control mode Voltage mode Features Enable, Power good, Prebias startup, Synchronous rectification Duty cycle (max) (%) 85 Iq (typ) (A) 0.004 Number of phases 1 Operating temperature range (°C) -40 to 85
TSSOP (PW) 16 32 mm² 5 x 6.4 VQFN (RGY) 16 14 mm² 4 x 3.5
  • Input Operating Voltage Range: 4.5 V to 20 V
  • Output Voltage as Low as 0.591 V ±0.5%
  • 180° Bi-Directional Out-of-Phase Synchronization
  • Internal 5-V Regulator
  • High and Low MOSFET Sense Overcurrent
  • 100-kHz to 600-kHz Switching Frequency
  • Enable and Power Good
  • Programmable UVLO and Hysteresis
  • Thermal Shutdown at 150°C
  • Selectable Soft Start
  • Prebias Output Safe
  • Input Operating Voltage Range: 4.5 V to 20 V
  • Output Voltage as Low as 0.591 V ±0.5%
  • 180° Bi-Directional Out-of-Phase Synchronization
  • Internal 5-V Regulator
  • High and Low MOSFET Sense Overcurrent
  • 100-kHz to 600-kHz Switching Frequency
  • Enable and Power Good
  • Programmable UVLO and Hysteresis
  • Thermal Shutdown at 150°C
  • Selectable Soft Start
  • Prebias Output Safe

The TPS40195 is a flexible synchronous buck controller that operates from a nominal 4.5-V to 20-V supply. This controller implements voltage mode control with the switching frequency adjustable from 100 kHz to 600 kHz. Flexible features found on this device include selectable soft-start time, programmable short-circuit limit, programmable undervoltage lockout (UVLO) and synchronization capability. An adaptive anti-cross conduction scheme is used to prevent shoot through current in the power FETs. Overcurrent detection is done by sensing the voltage drop across the low-side MOSFET when it is on, and comparing it with a user-programmable threshold.

The threshold is set with a single external resistor connected from ILIM to GND. Pulse-by-pulse limiting (to prevent current runaway) is provided by sensing the voltage across the high-side MOSFET when it is on and terminating the cycle when the voltage drop rises above a fixed threshold of 550 mV. When the controller senses an output short circuit, both MOSFETs are turned off and a timeout period is observed before attempting to restart. This provides limited power dissipation in the event of a sustained fault. Synchronization on this device is bi-directional. Devices can be synchronized 180° out of phase to a chosen master TPS40195 running at a fixed 250 kHz or 500 kHz, or can be synchronized to an outside clock source anywhere in the 100 kHz to 600 kHz range.

The TPS40195 is a flexible synchronous buck controller that operates from a nominal 4.5-V to 20-V supply. This controller implements voltage mode control with the switching frequency adjustable from 100 kHz to 600 kHz. Flexible features found on this device include selectable soft-start time, programmable short-circuit limit, programmable undervoltage lockout (UVLO) and synchronization capability. An adaptive anti-cross conduction scheme is used to prevent shoot through current in the power FETs. Overcurrent detection is done by sensing the voltage drop across the low-side MOSFET when it is on, and comparing it with a user-programmable threshold.

The threshold is set with a single external resistor connected from ILIM to GND. Pulse-by-pulse limiting (to prevent current runaway) is provided by sensing the voltage across the high-side MOSFET when it is on and terminating the cycle when the voltage drop rises above a fixed threshold of 550 mV. When the controller senses an output short circuit, both MOSFETs are turned off and a timeout period is observed before attempting to restart. This provides limited power dissipation in the event of a sustained fault. Synchronization on this device is bi-directional. Devices can be synchronized 180° out of phase to a chosen master TPS40195 running at a fixed 250 kHz or 500 kHz, or can be synchronized to an outside clock source anywhere in the 100 kHz to 600 kHz range.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 4
Typ Titel Datum
* Data sheet TPS40195 4.5-V to 20-V Synchronous Buck Controller With Synchronization and Power Good datasheet (Rev. F) PDF | HTML 07 Jun 2019
Selection guide Power Management Guide 2018 (Rev. R) 25 Jun 2018
Application note Enabling Multiple TPS4019x Devices 29 Mär 2012
More literature TPS40195RGY Test Report 15 Feb 2008

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS40195EVM-001 — TPS40195, 20 V-Eingang, 3,3 V-Ausgang, 20 A – Evaluierungsmodul

The TPS40195EVM evaluation module (EVM) is a synchronous buck converter providing a fixed 3.3V output at up to 20A from a 12V input bus. The EVM is designed to start up from a single supply, so no additional bias voltage is required for start up. The module uses the TPS40195 Mid-Voltage (...)
Benutzerhandbuch: PDF | HTML
Simulationsmodell

TPS40195 TINA-TI Average Reference Design

SLVM017.ZIP (314 KB) - TINA-TI Reference Design
Simulationsmodell

TPS40195 TINA-TI Average Spice Model

SLVM019.ZIP (3 KB) - TINA-TI Spice Model
Simulationsmodell

TPS40195 TINA-TI Transient Reference Design (Rev. B)

SLVC182B.ZIP (331 KB) - TINA-TI Reference Design
Simulationsmodell

TPS40195 TINA-TI Transient Spice Model

SLVM018.ZIP (22 KB) - TINA-TI Spice Model
Berechnungstool

SLUC263 Type III Compensation Calculation Tool

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
DC/DC controllers
  • TPS40007 Synchroner Abwärtsregler, Quelle/Senke, 2,25-5,5 V, 300 kHz, Vorspannungsbetrieb
  • TPS40009 Synchroner Abwärtsregler, Quelle/Senke, 2,25-5,5 V, 600 kHz, Vorspannungsbetrieb
  • TPS40021 Enhanced Low Input (2,25 V-5,5 V) bis zu 1 MHz Frequenz, synchron. Abwärtswandler, Quelle/Senke
  • TPS40040 Synchroner Abwärtsregler, 2,25 bis 5,5 V Eingangsspannung, 300 kHz, mit geringer Pin-Anzahl
  • TPS40041 Synchroner Abwärtsregler, 2,25 bis 5,5 V Eingangsspannung, 600 kHz, mit geringer Pin-Anzahl
  • TPS40055 Synchroner Abwärtsregler mit breitem Eingangsspannungsbereich (8 V–40 V) und bis zu 1 MHz Frequenz,
  • TPS40057 Synchroner Abwärtsregler mit breitem Eingangsspannungsbereich (8 V–40 V) und bis zu 1 MHz Frequenz,
  • TPS40075 4,5 V bis 28 V, Synchron-Abwärtsregler mit Spannungsvorsteuerung
  • TPS40077 4,5 V bis 28 V, Synchron-Abwärtsregler mit Spannungsvorsteuerung im HTSSOP-Gehäuse
  • TPS40101 4,5-V- bis 18-V-Synchron-Abwärtsregler mit fortschrittlicher Sequenzierung und Ausgangsspannungsrege
  • TPS40170 Synchroner PWM-Abwärtsregler, großer Eingangsspannungsbereich von 4,5 bis 60 V
  • TPS40190 4,5 V bis 15 V, 20 A, Synchron-Abwärtsregler
  • TPS40192 4,5-V- bis 18-V-, 20-A-, 600-kHz-Synchron-Abwärtsregler mit Power-Good
  • TPS40193 4,5-V- bis 18-V-, 20-A-, 300-kHz-Synchron-Abwärtsregler mit Power-Good
  • TPS40195 4,5-V- bis 20-V-, 20-A-Synchron-Abwärtsregler mit Power-Good und Synchronisierung
  • TPS40200 Asynchroner DC/DC-Abwärts-Regler mit breitem Eingangsspannungsbereich
  • TPS40303 Synchron-Abwärtsregler mit FSS, 3 V bis 20 V, 25 A, 300 kHz
  • TPS40304 3 V bis 20 V, 25 A, 600-kHz-Synchron-Abwärtsregler mit FSS
  • TPS40305 3-V- bis 20-V-, 25-A-, 1,2-MHz-Synchron-Abwärtsregler mit FSS
  • TPS40322 Synchroner Abwärtscontroller, Zweifach- oder Mehrphasenausgang
  • TPS40400 3 V bis 20 V, 30 A, Synchron-Abwärtsregler mit PMBus™, einschließlich Telemetrie
  • TPS40422 Synchroner Abwärtscontroller, Zweifach- oder Mehrphasenausgang, mit PMBus
  • TPS5130 4,5 V bis 28 V, synchroner Abwärtsregler mit Qualitätsanzeige
DC/DC converters
  • TPS53311 Synchroner Abwärtswandler, 2,9 bis 6 V Eingangsspannung, 3 A, mit Eco-Mode und Smooth PWM
  • TPS53313 Synchroner 6-A-Abwärtswandler mit 4,5 bis 16 V und optimiertem Wirkungsgrad bei geringer Last
  • TPS53316 Hocheffizienter 5-A-Abwärtsregler mit integriertem Schalter
  • TPS56121 Synchron-SWIFT™-Abwärtswandler von 4,5 V bis 14 V, 15 A
  • TPS56221 Synchron-SWIFT™-Abwärtswandler von 4,5 V bis 14 V, 25 A
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
TSSOP (PW) 16 Ultra Librarian
VQFN (RGY) 16 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos