TLV4172

AKTIV

36-V-Vierfach-Operationsverstärker mit 10 MHz und geringem Stromverbrauch für kostensensible Anwendu

Jetzt bestellen

Datenblatt

document-pdfAcrobat TLVx172 36-V, single-supply, low-power operational amplifier for cost-sensitive systems datasheet (Rev. C) (Englisch) PDF | HTML

Eine neuere Version dieses Produkts ist verfügbar

open-in-new

Alternativen vergleichen

Drop-In-Ersatz mit gegenüber dem verglichenen Baustein verbesserter Funktionalität.

TLV9364

AKTIV

Vierfach-Operationsverstärker, 40 V, 10,6 MHz, Rail-to-Rail-Ausgang Wider supply range (4.5 V to 40 V), higher GBW (10.6 MHz), faster slew rate (25 V/us), lower noise (8.5 nV/√Hz)

TLV4172

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

36

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

4.5

Rail-to-rail

In to V-, Out

GBW (typ) (MHz)

10

Slew rate (typ) (V/µs)

10

Vos (offset voltage at 25°C) (max) (mV)

1.7

Iq per channel (typ) (mA)

1.6

Vn at 1 kHz (typ) (nV√Hz)

9

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

1

Features

Cost Optimized, EMI Hardened

CMRR (typ) (dB)

116

Iout (typ) (A)

0.075

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

-2

Output swing headroom (to negative supply) (typ) (V)

0.07

Output swing headroom (to positive supply) (typ) (V)

-0.07

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

36

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

4.5

Rail-to-rail

In to V-, Out

GBW (typ) (MHz)

10

Slew rate (typ) (V/µs)

10

Vos (offset voltage at 25°C) (max) (mV)

1.7

Iq per channel (typ) (mA)

1.6

Vn at 1 kHz (typ) (nV√Hz)

9

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

1

Features

Cost Optimized, EMI Hardened

CMRR (typ) (dB)

116

Iout (typ) (A)

0.075

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

-2

Output swing headroom (to negative supply) (typ) (V)

0.07

Output swing headroom (to positive supply) (typ) (V)

-0.07

TSSOP (PW)

14

32 mm² (5 mm × 6.4 mm)

SOIC (D)

14

51.9 mm² (8.65 mm × 6 mm)

Supply Range: 4.5 V to 36 V, ±2.25 V to ±18 V
Low Noise: 9 nV/√Hz
Low Offset Drift: ±1 µV/°C (Typical)
EMI-Hardened
Input Range Includes Negative Supply
Rail-to-Rail Output
Gain Bandwidth: 10 MHz
Slew Rate: 10 V/µs
Low Quiescent Current: 1.6 mA per Amplifier
High Common-Mode Rejection: 116 dB (Typical)
Low Input Bias Current: 10 pA

Supply Range: 4.5 V to 36 V, ±2.25 V to ±18 V
Low Noise: 9 nV/√Hz
Low Offset Drift: ±1 µV/°C (Typical)
EMI-Hardened
Input Range Includes Negative Supply
Rail-to-Rail Output
Gain Bandwidth: 10 MHz
Slew Rate: 10 V/µs
Low Quiescent Current: 1.6 mA per Amplifier
High Common-Mode Rejection: 116 dB (Typical)
Low Input Bias Current: 10 pA

The TLVx172 family of electromagnetic interference (EMI)-hardened, 36-V, single-supply, low-noise operational amplifiers (op amps) features a THD+N of 0.0002% at 1 kHz with the ability to operate on supplies ranging from 4.5 V (±2.25 V) to 36 V (±18V). These features, along with low noise and very high PSRR, enable the TLVx172 to amplify microvolt-level signals in applications such as HEV and EV automobiles and power trains, medical instrumentation, and more. The TLVx172 device offers good offset and drift, a high bandwidth of 10 MHz, and a slew rate of 10 V/µs with only 2.3 mA of quiescent current over temperature (maximum).

Unlike most op amps that are specified at only one supply voltage, the TLVx172 device is specified from 4.5 V to 36 V. Input signals beyond the supply rails do not cause phase reversal. TLVx172 device is stable with capacitive loads up to 300 pF. The input can operate 100 mV below the negative rail and within 2 V of the positive rail for normal operation. Note that the device can operate with a full rail-to-rail input 100 mV beyond the positive rail, but with reduced performance within 2 V of the positive rail.

The TLVx172 op amp is specified from –40°C to +125°C.

The TLVx172 family of electromagnetic interference (EMI)-hardened, 36-V, single-supply, low-noise operational amplifiers (op amps) features a THD+N of 0.0002% at 1 kHz with the ability to operate on supplies ranging from 4.5 V (±2.25 V) to 36 V (±18V). These features, along with low noise and very high PSRR, enable the TLVx172 to amplify microvolt-level signals in applications such as HEV and EV automobiles and power trains, medical instrumentation, and more. The TLVx172 device offers good offset and drift, a high bandwidth of 10 MHz, and a slew rate of 10 V/µs with only 2.3 mA of quiescent current over temperature (maximum).

Unlike most op amps that are specified at only one supply voltage, the TLVx172 device is specified from 4.5 V to 36 V. Input signals beyond the supply rails do not cause phase reversal. TLVx172 device is stable with capacitive loads up to 300 pF. The input can operate 100 mV below the negative rail and within 2 V of the positive rail for normal operation. Note that the device can operate with a full rail-to-rail input 100 mV beyond the positive rail, but with reduced performance within 2 V of the positive rail.

The TLVx172 op amp is specified from –40°C to +125°C.

filter

Andere Universal-Operationsverstärker suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 2

Top-Dokumentation	Typ	Titel	Format-Optionen	Neueste englische Version herunterladen	Datum
*	Datenblatt	TLVx172 36-V, single-supply, low-power operational amplifier for cost-sensitive systems datasheet (Rev. C)	PDF \| HTML		21.01.2019
	E-book	The Signal e-book: A compendium of blog posts on op amp design topics	PDF \| HTML		28.03.2017

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

AMP-PDK-EVM — Evaluierungsmodul für das Verstärker-Leistungs-Entwicklungskit

Das Verstärker-Leistungs-Entwicklungskit (PDK) ist ein Evaluierungsmodul (EVM) zum Testen gängiger Operationsverstärker (OpAmp)-Parameter und ist mit den meisten Operationsverstärkern und Komparatoren kompatibel. Das EVM-Kit bietet eine Hauptplatine mit verschiedenen gesockelten (...)

Benutzerhandbuch: PDF | HTML

Unterstützte Produkte und Hardware

Ansichtsoptionen

Simulationsmodell