Home Schnittstelle CAN-Transceiver
Home
Schnittstelle
CAN-Transceiver
NEU

TCAN942H-Q1

VORSCHAU

CAN-FD-Transceiver für die Automobilindustrie mit Standby für 48-V-Systeme

Jetzt bestellen
Datenblatt

Eine neuere Version dieses Produkts ist verfügbar

open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung.
TCAN1042H-Q1 AKTIV 70-V-Bus-Fehler-geschützter CAN-Transceiver mit flexibler Datenrate für die Automobilindustrie Meets ISO 11898-2:2024, supports higher data rate up to 8Mbps

TCAN942H-Q1

VORSCHAU
Datenblatt Jetzt bestellen

Produktdetails

Features Standby Architecture 12V, 24V, 48V Bus fault voltage (V) -70 to 70 Protocols CAN, CAN FD Supply voltage (VCC) (V) 4.5V to 5.5V I/O supply voltage (V) 1.8, 3.3, 5 Signaling rate (max) (Mbps) 2 Number of channels 1 Rating Automotive
Features Standby Architecture 12V, 24V, 48V Bus fault voltage (V) -70 to 70 Protocols CAN, CAN FD Supply voltage (VCC) (V) 4.5V to 5.5V I/O supply voltage (V) 1.8, 3.3, 5 Signaling rate (max) (Mbps) 2 Number of channels 1 Rating Automotive
SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm)
  • AEC-Q100 (Grade 1) Qualified for automotive applications
  • Meets the requirements of ISO 11898-2:2024 and SAE J2284/5 physical layer standards for CAN FD
  • Functional Safety-Capable
    • Documentation will be available upon device release to aid in functional safety system design
  • Supports CAN and CAN FD communication up to 8Mbps
  • Increased robustness for 48V battery architectures and other higher-voltage applications
    • High system-level short-to-battery and loss-of-ground resiliency
  • VIO level shifting supports 2.9V to 5.5V
  • Wide ±30V receiver input common-mode range
  • Protection features:
    • IEC ESD protection on bus pins
    • Absolute maximum rating of ±72 on CAN pins
    • Rated for system-level CAN bus faults of 58V or higher
    • Undervoltage and loss-of-GND protection
    • TXD dominant time-out (DTO)
    • Thermal shutdown protection (TSD)
  • Operating modes:
    • Normal mode
    • Low-power standby mode supporting remote wake-up requests
  • Ultra-passive behavior when unpowered
    • CAN pins become high-impedance when the device is unpowered
    • Hot plug capable: glitch-free operation on RXD during power-up and power-down
    • Defined device behavior during undervoltage conditions and when logic pins are floating
  • Available in SOIC (8) and leadless 3mm × 3mm VSON (8) package with wettable flanks for automated optical inspection (AOI) capability
  • AEC-Q100 (Grade 1) Qualified for automotive applications
  • Meets the requirements of ISO 11898-2:2024 and SAE J2284/5 physical layer standards for CAN FD
  • Functional Safety-Capable
    • Documentation will be available upon device release to aid in functional safety system design
  • Supports CAN and CAN FD communication up to 8Mbps
  • Increased robustness for 48V battery architectures and other higher-voltage applications
    • High system-level short-to-battery and loss-of-ground resiliency
  • VIO level shifting supports 2.9V to 5.5V
  • Wide ±30V receiver input common-mode range
  • Protection features:
    • IEC ESD protection on bus pins
    • Absolute maximum rating of ±72 on CAN pins
    • Rated for system-level CAN bus faults of 58V or higher
    • Undervoltage and loss-of-GND protection
    • TXD dominant time-out (DTO)
    • Thermal shutdown protection (TSD)
  • Operating modes:
    • Normal mode
    • Low-power standby mode supporting remote wake-up requests
  • Ultra-passive behavior when unpowered
    • CAN pins become high-impedance when the device is unpowered
    • Hot plug capable: glitch-free operation on RXD during power-up and power-down
    • Defined device behavior during undervoltage conditions and when logic pins are floating
  • Available in SOIC (8) and leadless 3mm × 3mm VSON (8) package with wettable flanks for automated optical inspection (AOI) capability

The TCAN942H-Q1 is a Controller Area Network (CAN) transceiver that meets the physical layer requirements of ISO 11898-2:2026 for CAN FD applications up to 8Mbps along with SAE J2284-1 through SAE J2284-5.

This family of transceivers has enhanced protection capability for system-level CAN short-to-battery and ECU loss-of-GND scenarios in 48V battery automotive settings, including for implementations using common-mode chokes. Additionally, these transceivers have certified electromagnetic compatibility (EMC) operation, making it an excellent choice for CAN CC and CAN FD networks in EMC-sensitive settings across all operation speeds. It is pin-compatible with 8-pin CAN FD and CAN SIC transceivers such as TCAN1044A(V)-Q1 and/or TCAN1472(V)-Q1.

The TCAN942HV-Q1 variant includes internal logic voltage translation using the VIO pin, allowing the transceiver to work with either 3.3V or 5V controller logic levels. These devices also support low-power standby mode with remote wake-up via the CAN bus, compliant with the wake-up pattern (WUP) defined in ISO 11898-2:2024. The device family also includes many protection features such as undervoltage detection, thermal shutdown (TSD), driver dominant timeout (TXD DTO), and transient overvoltage protection on the CAN pins.

The TCAN942H-Q1 is a Controller Area Network (CAN) transceiver that meets the physical layer requirements of ISO 11898-2:2026 for CAN FD applications up to 8Mbps along with SAE J2284-1 through SAE J2284-5.

This family of transceivers has enhanced protection capability for system-level CAN short-to-battery and ECU loss-of-GND scenarios in 48V battery automotive settings, including for implementations using common-mode chokes. Additionally, these transceivers have certified electromagnetic compatibility (EMC) operation, making it an excellent choice for CAN CC and CAN FD networks in EMC-sensitive settings across all operation speeds. It is pin-compatible with 8-pin CAN FD and CAN SIC transceivers such as TCAN1044A(V)-Q1 and/or TCAN1472(V)-Q1.

The TCAN942HV-Q1 variant includes internal logic voltage translation using the VIO pin, allowing the transceiver to work with either 3.3V or 5V controller logic levels. These devices also support low-power standby mode with remote wake-up via the CAN bus, compliant with the wake-up pattern (WUP) defined in ISO 11898-2:2024. The device family also includes many protection features such as undervoltage detection, thermal shutdown (TSD), driver dominant timeout (TXD DTO), and transient overvoltage protection on the CAN pins.
filter Andere CAN-Transceiver suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Top-Dokumentation Typ Titel Format-Optionen Neueste englische Version herunterladen Datum
* Datenblatt TCAN942H-Q1 Automotive CAN FD Transceiver With Standby Mode and Enhanced Fault Protection datasheet PDF | HTML 20.07.2026

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TCAN-SOIC8-EVM — Universelles Evaluierungsmodul für CAN-Transceiver im 8-poligen SOIC- oder SOT-Gehäuse

Der TCAN-SOIC8-EVM wurde entwickelt, um Benutzern die Möglichkeit zu geben, jeden 8-poligen CAN-Transciever-Baustein von Texas Instruments zu prüfen. Die Platine bietet Flexibilität bei der Evaluierung mit Komponenten-Footprint und Jumper-Optionen.

Benutzerhandbuch: PDF | HTML
Unterstützte Produkte und Hardware
Vorrätig
Limit:
??asset.out-of-stock-ti_de_DE??
Nicht verfügbar
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SOIC (D) 8 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos