SN75LVPE3410

Name: SN75LVPE3410
Brand: TI
SKU: SN75LVPE3410
Price: 2.875 USD

AKTIV

Linearer Redriver, PCIe® 3.0, 8 Gbit/s, 4 Kanäle

Jetzt bestellen

Datenblatt

document-pdfAcrobat SN75LVPE3410 Quad-Channel PCI-Express 3.0 Linear Redriver datasheet (Englisch) PDF | HTML

SN75LVPE3410

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Type

Redriver

Protocols

CXL, PCI/PCIe, PCIe, PCIe1, PCIe2, PCIe3

Applications

Backplane, CXL, PCIE, PCIe, SAS, SATA

Number of channels

4

Speed (max) (Gbpp)

8

Supply voltage (V)

3.3

Rating

Catalog

Operating temperature range (°C)

0 to 70

Type

Redriver

Protocols

CXL, PCI/PCIe, PCIe, PCIe1, PCIe2, PCIe3

Applications

Backplane, CXL, PCIE, PCIe, SAS, SATA

Number of channels

4

Speed (max) (Gbpp)

8

Supply voltage (V)

3.3

Rating

Catalog

Operating temperature range (°C)

0 to 70

WQFN (RNQ)

40

24 mm² 6 x 4

Quad-channel linear equalizer supporting PCIe 1.0/2.0/3.0 up to 8 Gbps interfaces
CTLE boosts up to 12 dB at 4 GHz helps to extend channel reach
Ultra-low latency of 70 ps
Excellent return loss of -17 dB at 4 GHz
Low additive random jitter of 60 fs (typical) with PRBS data
Single 3.3-V supply
Internal voltage regulator provides immunity to supply noise
Low active power of 124 mW/channel
No heat sink required
Pin-strap or SMBus programming
Support for x2, x4, x8, x16 PCIe bus width with one or multiple SN75LVPE3410
Automatic receiver detection for PCIe use cases
Protocol agnostic linear redriver allows seamless support for PCIe link training
Commercial temperature range of 0°C to 70°C
4.0 mm × 6.0 mm, 40 pin WQFN package

Quad-channel linear equalizer supporting PCIe 1.0/2.0/3.0 up to 8 Gbps interfaces
CTLE boosts up to 12 dB at 4 GHz helps to extend channel reach
Ultra-low latency of 70 ps
Excellent return loss of -17 dB at 4 GHz
Low additive random jitter of 60 fs (typical) with PRBS data
Single 3.3-V supply
Internal voltage regulator provides immunity to supply noise
Low active power of 124 mW/channel
No heat sink required
Pin-strap or SMBus programming
Support for x2, x4, x8, x16 PCIe bus width with one or multiple SN75LVPE3410
Automatic receiver detection for PCIe use cases
Protocol agnostic linear redriver allows seamless support for PCIe link training
Commercial temperature range of 0°C to 70°C
4.0 mm × 6.0 mm, 40 pin WQFN package

The SN75LVPE3410 is a four channel low-power high-performance linear repeater or redriver designed to support PCI Express (PCIe™) Generation 1.0, 2.0 and 3.0.

The SN75LVPE3410 receivers deploy continuous time linear equalizers (CTLE) to provide a programmable high-frequency boost. The equalizer can open an input eye that is completely closed due to inter-symbol interference (ISI) induced by an interconnect medium, such as PCB traces. The CTLE receiver is followed by a linear output driver. The linear datapaths of SN75LVPE3410 preserve transmit preset signal characteristics. The linear redriver becomes part of the passive channel that as a whole get link trained for best transmit and receive equalization settings. This transparency in the link training protocol result in best electrical link and lowest possible latency. The programmable equalization of the device along with its linear datapaths maximizes the flexibility of physical placement within the interconnect channel and improves overall channel performance.

The programmable settings can be applied easily through software (SMBus or I 2C) or by using pin control.

The SN75LVPE3410 is a four channel low-power high-performance linear repeater or redriver designed to support PCI Express (PCIe™) Generation 1.0, 2.0 and 3.0.

The SN75LVPE3410 receivers deploy continuous time linear equalizers (CTLE) to provide a programmable high-frequency boost. The equalizer can open an input eye that is completely closed due to inter-symbol interference (ISI) induced by an interconnect medium, such as PCB traces. The CTLE receiver is followed by a linear output driver. The linear datapaths of SN75LVPE3410 preserve transmit preset signal characteristics. The linear redriver becomes part of the passive channel that as a whole get link trained for best transmit and receive equalization settings. This transparency in the link training protocol result in best electrical link and lowest possible latency. The programmable equalization of the device along with its linear datapaths maximizes the flexibility of physical placement within the interconnect channel and improves overall channel performance.

The programmable settings can be applied easily through software (SMBus or I 2C) or by using pin control.

filter

Andere PCIe-, SAS- und SATA-ICs suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 2

Top-Dokumentation	Typ	Titel	Format-Optionen	Datum
*	Data sheet	SN75LVPE3410 Quad-Channel PCI-Express 3.0 Linear Redriver datasheet	PDF \| HTML	01 Jun 2023
	User guide	SN75LVPE3410 Programming Guide	PDF \| HTML	11 Apr 2023

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

DS160PR410EVM-RSC — Evaluierungsmodul für linearen vierkanaligen PCI-Express Gen-4-Redriver

Das DS160PR410EVM-RSC-Evaluierungsmodul (EVM) bietet eine komplette Plattform mit hoher Bandbreite zur Evaluierung der Signalkonditionierungsfunktionen des linearen PCI-Express-Redriver DS160PR410 von Texas Instruments. Es verfügt über vier DS160PR410-Bausteine, welche die Übertragungsdistanz (...)

Benutzerhandbuch: PDF

Nicht verfügbar auf TI.com

GUI für Evaluierungsmodul (EVM)