MCP6294

AKTIV

Rauscharmer (8,7 nV/√Hz) Vierfach-RRIO-Operationsverstärker, 5,5 V, 10 MHz, 50-mA-Ausgangsstrom

Jetzt bestellen

Datenblatt

document-pdfAcrobat MCP629x 10-MHz, Rail-to-Rail Operational Amplifier datasheet (Rev. D) (Englisch) PDF | HTML

MCP6294

AKTIV

Jetzt bestellen

Produktdetails

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.4

Rail-to-rail

In, Out

GBW (typ) (MHz)

10

Slew rate (typ) (V/µs)

6.5

Vos (offset voltage at 25°C) (max) (mV)

3

Iq per channel (typ) (mA)

0.6

Vn at 1 kHz (typ) (nV√Hz)

8.7

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

1.1

Features

EMI Hardened

CMRR (typ) (dB)

103

Iout (typ) (A)

0.05

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

0.1

Output swing headroom (to negative supply) (typ) (V)

0.015

Output swing headroom (to positive supply) (typ) (V)

-0.015

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.4

Rail-to-rail

In, Out

GBW (typ) (MHz)

10

Slew rate (typ) (V/µs)

6.5

Vos (offset voltage at 25°C) (max) (mV)

3

Iq per channel (typ) (mA)

0.6

Vn at 1 kHz (typ) (nV√Hz)

8.7

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Offset drift (typ) (µV/°C)

1.1

Features

EMI Hardened

CMRR (typ) (dB)

103

Iout (typ) (A)

0.05

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

0.1

Output swing headroom (to negative supply) (typ) (V)

0.015

Output swing headroom (to positive supply) (typ) (V)

-0.015

SOIC (D)

14

51.9 mm² (8.65 mm × 6 mm)

TSSOP (PW)

14

32 mm² (5 mm × 6.4 mm)

Gain bandwidth product: 10-MHz typical
Operating supply voltage: 2.4 V to 5.5 V
Rail-to-rail input/output
Low input bias current: 1 pA
Low quiescent current: 0.6 mA
Input voltage noise: 8.7 nV/√Hz at f = 10 kHz
Internal RF and EMI filter
Extended temperature range: –40°C to 125°C
Unity-gain stable
Easier to stabilize with higher capacitive load due to resistive open-loop output impedance

Gain bandwidth product: 10-MHz typical
Operating supply voltage: 2.4 V to 5.5 V
Rail-to-rail input/output
Low input bias current: 1 pA
Low quiescent current: 0.6 mA
Input voltage noise: 8.7 nV/√Hz at f = 10 kHz
Internal RF and EMI filter
Extended temperature range: –40°C to 125°C
Unity-gain stable
Easier to stabilize with higher capacitive load due to resistive open-loop output impedance

The MCP6291 (single), MCP6292 (dual), and MCP6294 (quad) devices comprise a family of general-purpose, low-power operational amplifiers. Features such as rail-to-rail input and output swings, low quiescent current (600-µA/ch typical) combined with a wide bandwidth of 10 MHz, and low noise (8.7 nV/√Hz at 10 kHz) make this family attractive for a variety of applications that require a balance between cost and performance. The low input bias current enables the family to be used in applications with high-source impedances.

The robust design of the MCP629x provides ease-of-use to the circuit designer: a unity-gain stable, integrated RFI and EMI rejection filter, no phase reversal in overdrive condition, and high electrostatic discharge (ESD) protection (4-kV HBM).

The MCP629x family operates over the extended temperature range of –40°C to 125°C. The family has a power supply range of 2.4 V to 5.5 V.

The MCP6291 (single), MCP6292 (dual), and MCP6294 (quad) devices comprise a family of general-purpose, low-power operational amplifiers. Features such as rail-to-rail input and output swings, low quiescent current (600-µA/ch typical) combined with a wide bandwidth of 10 MHz, and low noise (8.7 nV/√Hz at 10 kHz) make this family attractive for a variety of applications that require a balance between cost and performance. The low input bias current enables the family to be used in applications with high-source impedances.

The robust design of the MCP629x provides ease-of-use to the circuit designer: a unity-gain stable, integrated RFI and EMI rejection filter, no phase reversal in overdrive condition, and high electrostatic discharge (ESD) protection (4-kV HBM).

The MCP629x family operates over the extended temperature range of –40°C to 125°C. The family has a power supply range of 2.4 V to 5.5 V.

filter

Andere Universal-Operationsverstärker suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

Top-Dokumentation	Typ	Titel	Format-Optionen	Neueste englische Version herunterladen		Datum
*	Datenblatt	MCP629x 10-MHz, Rail-to-Rail Operational Amplifier datasheet (Rev. D)	PDF \| HTML		01.10.2019

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

AMP-PDK-EVM — Evaluierungsmodul für das Verstärker-Leistungs-Entwicklungskit

Das Verstärker-Leistungs-Entwicklungskit (PDK) ist ein Evaluierungsmodul (EVM) zum Testen gängiger Operationsverstärker (OpAmp)-Parameter und ist mit den meisten Operationsverstärkern und Komparatoren kompatibel. Das EVM-Kit bietet eine Hauptplatine mit verschiedenen gesockelten (...)

Benutzerhandbuch: PDF | HTML

Unterstützte Produkte und Hardware

Ansichtsoptionen

Simulationsmodell