Produktdetails

Frequency (max) (MHz) 22600 Frequency (min) (MHz) 45 Normalized PLL phase noise (dBc/Hz) -236 1/f noise (10-kHz offset at 1-GHz carrier) (dBc/Hz) -134 Features Integer-boundary spurs (IBS) removal, Integrated VCO, JESD204B SYSREF, Multi-device sync, Phase adjustment, Ultra-fast VCO Calibration, Wideband Current consumption (mA) 500 Integrated VCO Yes Operating temperature range (°C) -40 to 85 Rating Catalog Lock time (µs) (typ) (s) Loop BW dependent
Frequency (max) (MHz) 22600 Frequency (min) (MHz) 45 Normalized PLL phase noise (dBc/Hz) -236 1/f noise (10-kHz offset at 1-GHz carrier) (dBc/Hz) -134 Features Integer-boundary spurs (IBS) removal, Integrated VCO, JESD204B SYSREF, Multi-device sync, Phase adjustment, Ultra-fast VCO Calibration, Wideband Current consumption (mA) 500 Integrated VCO Yes Operating temperature range (°C) -40 to 85 Rating Catalog Lock time (µs) (typ) (s) Loop BW dependent
VQFNP (RTC) 48 49 mm² 7 x 7
  • Output frequency: 45 MHz to 22.6 GHz
  • 36-fs rms jitter (12 kHz – 95 MHz) at 6 GHz
  • High-performance PLL
    • Figure of merit: –236 dBc/Hz
    • Normalized 1/f noise: –134 dBc/Hz
    • -95 dBc Integer Mode Spurs (fPD=100 MHz)
    • High phase detector frequency
      • 400-MHz integer mode
      • 300-MHz fractional mode
    • Programmable input multiplier
    • Direct PFD input for offset mixing support allowing PLL N divider to be one for ultra-low jitter
  • 2.5-µs fast VCO calibration time
  • Mute pin with 200-ns mute/unmute time
  • –45-dBc VCO leakage with doubler enabled
  • Support for external VCO up to 22.6-GHz
  • Synchronization of output phase across multiple devices
  • Two differential RF outputs and one differential SYSREF output for JESD204B support
  • Output frequency: 45 MHz to 22.6 GHz
  • 36-fs rms jitter (12 kHz – 95 MHz) at 6 GHz
  • High-performance PLL
    • Figure of merit: –236 dBc/Hz
    • Normalized 1/f noise: –134 dBc/Hz
    • -95 dBc Integer Mode Spurs (fPD=100 MHz)
    • High phase detector frequency
      • 400-MHz integer mode
      • 300-MHz fractional mode
    • Programmable input multiplier
    • Direct PFD input for offset mixing support allowing PLL N divider to be one for ultra-low jitter
  • 2.5-µs fast VCO calibration time
  • Mute pin with 200-ns mute/unmute time
  • –45-dBc VCO leakage with doubler enabled
  • Support for external VCO up to 22.6-GHz
  • Synchronization of output phase across multiple devices
  • Two differential RF outputs and one differential SYSREF output for JESD204B support

The LMX2820 is a high-performance, wideband synthesizer that can generate any frequency in the range of 45 MHz to 22.6 GHz. The high performance PLL with figure of merit of –236 dBc/Hz and high phase detector frequency can attain very low in-band noise and integrated jitter. The high-speed N-divider has no pre-divider, thus significantly reducing the amplitude and number of spurs. There is also a programmable input multiplier to mitigate integer boundary spurs.

The LMX2820 allows users to synchronize the output of multiple devices and also enables applications that need deterministic delay between input and output. The fast calibration algorithm greatly reduces the VCO calibration time, enabling systems requiring fast frequency hopping. The LMX2820 can generate or repeat SYSREF that is compliant to the JESD204B standard, allowing for its use as a low-noise clock source for high-speed data converters. This synthesizer can also be used with an external VCO. A direct PFD input pin is provided to support offset mixing for low spurious transmission.

The device runs from a single 3.3-V supply and has integrated LDOs that eliminate the need for onboard low-noise LDOs.

The LMX2820 is a high-performance, wideband synthesizer that can generate any frequency in the range of 45 MHz to 22.6 GHz. The high performance PLL with figure of merit of –236 dBc/Hz and high phase detector frequency can attain very low in-band noise and integrated jitter. The high-speed N-divider has no pre-divider, thus significantly reducing the amplitude and number of spurs. There is also a programmable input multiplier to mitigate integer boundary spurs.

The LMX2820 allows users to synchronize the output of multiple devices and also enables applications that need deterministic delay between input and output. The fast calibration algorithm greatly reduces the VCO calibration time, enabling systems requiring fast frequency hopping. The LMX2820 can generate or repeat SYSREF that is compliant to the JESD204B standard, allowing for its use as a low-noise clock source for high-speed data converters. This synthesizer can also be used with an external VCO. A direct PFD input pin is provided to support offset mixing for low spurious transmission.

The device runs from a single 3.3-V supply and has integrated LDOs that eliminate the need for onboard low-noise LDOs.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie verglichener Baustein
LMX1204 AKTIV 12,8-GHz-RF-Puffer, -Multiplikator und -Teiler mit SYSREF-Unterstützung gemäß JESD204B/C und Phasens Up to 12.8-GHz clock buffer, multiplier and divider and five-channel JESD support

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 20
Top-Dokumentation Typ Titel Format-Optionen Datum
* Data sheet LMX2820 22.6-GHz Wideband PLLatinum RF Synthesizer With Phase Synchronization and JESD204B Support datasheet (Rev. C) PDF | HTML 04 Feb 2021
Application note Using Instant Calibration With the LMX2820 PDF | HTML 14 Jun 2025
Application note Practical Clocking Considerations That Give Your Next High-Speed Converter Design an Edge (Rev. A) PDF | HTML 11 Apr 2025
Application note Combining More than Two Signals for Better Noise PDF | HTML 24 Mär 2025
Application brief Compilation of RF Synthesizer Resources PDF | HTML 22 Okt 2024
Application note Sine to Square Wave Conversion Using Clock Buffers PDF | HTML 03 Sep 2024
Application brief Common Mistakes While Designing With Rf Clock Synthesizers and How To Mitigate the Same PDF | HTML 08 Aug 2024
Circuit design MASH_SEED Optimization and Impact on Spurs (LMX2820) PDF | HTML 08 Aug 2024
Application brief High-Frequency Clock (> 20GHz) Skew Variation Between Two RF Synthesizers Across Temperature PDF | HTML 26 Apr 2024
Application brief High-Frequency Delay Adjustments Between Two RF Synthesizers PDF | HTML 26 Apr 2024
Application brief LMX2820 with Internal Doubler versus LMX2594 PDF | HTML 16 Jan 2024
Application note LMX2820 RF Synthesizer Phase Noise Improvement With Alternative Topologies (Rev. A) PDF | HTML 22 Mai 2023
Application note External Doubler Extends LMX2820 Operation to 44 GHz PDF | HTML 31 Mär 2023
User guide How to Phase Synchronize Multiple LMX2820 Devices PDF | HTML 19 Dez 2022
Application note High Isolation, Fast Frequency Switching With LMX2820 in Ping-Pong Architecture PDF | HTML 20 Sep 2022
Application note Combining Two LMX2820 Synthesizer Outputs for Improved Phase Noise (Rev. A) PDF | HTML 03 Mär 2022
User guide LMX2820 Register Map (Rev. A) 09 Dez 2020
Application note Impact of PLL Jitter to GSPS ADC's SNR and Performance Optimization 11 Nov 2020
Application note Dramatically Improve Your Lock Time with VCO Instant Calibration PDF | HTML 17 Sep 2020
Certificate LMX2820EVM EU Declaration of Conformity (DoC) 09 Jun 2020

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LMX2820EVM — LMX2820-Evaluierungsmodul für HF-Breitbandsynthesizer mit 22,6 GHz

Dieses Evaluierungsmodul ist für den LMX2820 vorgesehen, bei dem es sich um einen HF-Breitbandsynthesizer mit 22,6 GHz handelt. Dieser Synthesizer unterstützt JESD204B-konforme SYSREF-Signalpufferung und -Erzeugung. Mit dem LMX2820 können Entwickler die Ausgabe mehrerer Instanzen des Bausteins (...)
Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Support-Software

TICSPRO-SW TICS Pro GUI and Live Programming Tool for Clocking Devices

Texas Instruments clocks and synthesizers (TICS) pro software is used to program the evaluation modules (EVMs) for product numbers with these prefixes: CDC, LMK and LMX. These products include phase-locked loops and voltage-controlled oscillators (PLL+VCO), synthesizers and clocking devices.

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Download-Optionen
Simulationsmodell

LMX2820 IBIS model

SNAM245.ZIP (45 KB) - IBIS Model
Designtool

CLOCK-TREE-ARCHITECT — Programmiersoftware Clock Tree Architect

Der Taktbaum-Architekt ist ein Taktbaum-Synthesetool, das Ihren Designprozess optimiert, indem es Taktbaumlösungen auf der Grundlage Ihrer Systemanforderungen erzeugt. Das Tool zieht Daten aus einer umfangreichen Datenbank von Taktgeberprodukten, um eine Multi-Chip-Taktlösung auf Systemebene zu (...)
Designtool

PLLATINUMSIM-SW PLL loop filter, phase noise, lock time, and spur simulation tool

PLLATINUMSIM-SW is a simulation tool that allows users to create detailed designs and simulations of our PLLatinum™ integrated circuits, which include the LMX series of phase-locked loops (PLLs) and synthesizers.

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Download-Optionen
Referenzdesigns

TIDA-010230 — Referenzdesign für Multi-Kanal-HF-Transceiver, rauscharme Taktung für Radar- und EW-Anwendungen

In modernen Radar- und EW-Systemen (Electronic Warfare) werden häufig aktive elektronisch abgetastete Antennensysteme (AESA) mit Hochgeschwindigkeits-Mehrkanal-HF-Transceivern verwendet. Diese Systeme erfordern eine äußerst rauscharme Taktung, die in der Lage ist, den Versatz von Kanal zu Kanal (...)
Design guide: PDF
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFNP (RTC) 48 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos