DS10BR150

AKTIV

LVDS-Puffer/Repeater mit 1,0 Gbit/s

Jetzt bestellen

Datenblatt

document-pdfAcrobat DS10BR150 1.0 Gbps LVDS Buffer / Repeater datasheet (Rev. D) (Englisch)

DS10BR150

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Function

Buffer

Protocols

CML, LVDS, LVPECL

Number of transmitters

1

Number of receivers

1

Signaling rate (Mbps)

1000

Input signal

CML, LVDS, LVPECL

Output signal

LVDS

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Function

Buffer

Protocols

CML, LVDS, LVPECL

Number of transmitters

1

Number of receivers

1

Signaling rate (Mbps)

1000

Input signal

CML, LVDS, LVPECL

Output signal

LVDS

Rating

Catalog

Operating temperature range (°C)

-40 to 85

WSON (NGQ)

8

9 mm² (3 mm × 3 mm)

DC - 1.0 Gbps Low Jitter, High Noise Immunity, Low Power Operation
On-chip 100Ω Input and Output Termination Minimizes Insertion and Return Losses, Reduces Component Count and Minimizes Board Space
7 kV ESD on LVDS I/O Pins Protects Adjoining Components
Small 3 mm x 3 mm 8-WSON Space Saving Package

All trademarks are the property of their respective owners.

DC - 1.0 Gbps Low Jitter, High Noise Immunity, Low Power Operation
On-chip 100Ω Input and Output Termination Minimizes Insertion and Return Losses, Reduces Component Count and Minimizes Board Space
7 kV ESD on LVDS I/O Pins Protects Adjoining Components
Small 3 mm x 3 mm 8-WSON Space Saving Package

All trademarks are the property of their respective owners.

The DS10BR150 is a single channel 1.0 Gbps LVDS buffer optimized for high-speed signal transmission over lossy FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and noise immunity.

Wide input common mode range allows the receiver to accept signals with LVDS, CML and LVPECL levels; the output levels are LVDS. A very small package footprint requires a minimal space on the board while the flow-through pinout allows easy board layout. The differential inputs and outputs are internally terminated with a 100Ω resistor to lower device input and output return losses, reduce component count and further minimize board space.

The DS10BR150 is a single channel 1.0 Gbps LVDS buffer optimized for high-speed signal transmission over lossy FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and noise immunity.

Wide input common mode range allows the receiver to accept signals with LVDS, CML and LVPECL levels; the output levels are LVDS. A very small package footprint requires a minimal space on the board while the flow-through pinout allows easy board layout. The differential inputs and outputs are internally terminated with a 100Ω resistor to lower device input and output return losses, reduce component count and further minimize board space.

filter

Andere LVDS-, M-LVDS- und PECL-ICs suchen

Herunterladen Video mit Transkript ansehen Video

Top-Dokumentation	Typ	Titel	Format-Optionen	Neueste englische Version herunterladen	Datum
*	Datenblatt	DS10BR150 1.0 Gbps LVDS Buffer / Repeater datasheet (Rev. D)			12.04.2013
	Benutzerhandbuch	1.06 Gbps LVDS Buffer Repeater (DS10BR150) Evaluation Kit			25.01.2012

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

DS10BR150EVK — 1,06 Gbit/s-LVDS-Puffer-Repeater (DS10BR150) – Evaluierungskit

The DS10BR150EVK is an evaluation kit designed for demonstrating performance of the 1.06 Gbps LVDS Buffer / Repeater (DS10BR150). The purpose of this document is to: familiarize you with the DS10BR150EVK, suggest the test setup procedures and instrumentation, and guide you through some typical (...)

Unterstützte Produkte und Hardware

Vorrätig

Limit:

Zum Bestellen bitte anmelden

lock

Melden Sie sich an, um den Lagerbestand einzusehen

??asset.out-of-stock-ti_de_DE??

Nicht verfügbar

Simulationsmodell