TLC1543

正在供货

具有串行输出、片上系统时钟且温度范围为 -40°C 至 125°C 的 11 通道、10 位、38kSPS ADC

立即订购

数据表

document-pdfAcrobat 10-Bit Analog-to-Digital Converters With Serial Control And 11 Analog Inputs 数据表 (Rev. G) (英语)

可提供此产品的更新版本

open-in-new

比较替代产品

该产品会持续为现有客户提供。新设计应考虑替代产品。

功能与比较器件相似

ADS7956

正在供货

10 位、1MSPS、12 通道、单端、微功耗、串行接口、SAR ADC Higher speed, higher channel count

TLC1543

正在供货

数据表

立即订购

产品详情

Resolution (bps)

10

Sample rate (max) (ksps)

38

Number of input channels

11

Interface type

SPI

Architecture

SAR

Input type

Single-ended

Multichannel configuration

Multiplexed

Rating

Automotive, Catalog

Reference mode

External

Input voltage range (max) (V)

5.5

Input voltage range (min) (V)

0

Operating temperature range (°C)

-40 to 125

Power consumption (typ) (mW)

4

Analog supply (min) (V)

4.5

Analog supply voltage (max) (V)

5.5

Digital supply (min) (V)

4.5

Digital supply (max) (V)

5.5

Resolution (bps)

10

Sample rate (max) (ksps)

38

Number of input channels

11

Interface type

SPI

Architecture

SAR

Input type

Single-ended

Multichannel configuration

Multiplexed

Rating

Automotive, Catalog

Reference mode

External

Input voltage range (max) (V)

5.5

Input voltage range (min) (V)

0

Operating temperature range (°C)

-40 to 125

Power consumption (typ) (mW)

4

Analog supply (min) (V)

4.5

Analog supply voltage (max) (V)

5.5

Digital supply (min) (V)

4.5

Digital supply (max) (V)

5.5

PDIP (N)

20

228.702 mm² 24.33 x 9.4

PLCC (FN)

20

98.01 mm² 9.9 x 9.9

SOIC (DW)

20

131.84 mm² 12.8 x 10.3

SSOP (DB)

20

56.16 mm² 7.2 x 7.8

10-Bit Resolution A/D Converter
11 Analog Input Channels
Three Built-In Self-Test Modes
Inherent Sample-and-Hold Function
Total Unadjusted Error. . .±1 LSB Max
On-Chip System Clock
End-of-Conversion (EOC) Output
Terminal Compatible With TLC542
CMOS Technology

10-Bit Resolution A/D Converter
11 Analog Input Channels
Three Built-In Self-Test Modes
Inherent Sample-and-Hold Function
Total Unadjusted Error. . .±1 LSB Max
On-Chip System Clock
End-of-Conversion (EOC) Output
Terminal Compatible With TLC542
CMOS Technology

The TLC1542C, TLC1542I, TLC1542M, TLC1542Q, TLC1543C, TLC1543I, and TLC1543Q are CMOS 10-bit switched-capacitor successive-approximation analog-to-digital converters. These devices have three inputs and a 3-state output [chip select (CS), input-output clock (I/O CLOCK), address input (ADDRESS), and data output (DATA OUT)] that provide a direct 4-wire interface to the serial port of a host processor. These devices allow high-speed data transfers from the host.

In addition to a high-speed A/D converter and versatile control capability, these devices have an on-chip 14-channel multiplexer that can select any one of 11 analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic. At the end of A/D conversion, the end-of-conversion (EOC) output goes high to indicate that conversion is complete. The converter incorporated in the devices features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating free-air temperature range.

The TLC1542C, TLC1542I, TLC1542M, TLC1542Q, TLC1543C, TLC1543I, and TLC1543Q are CMOS 10-bit switched-capacitor successive-approximation analog-to-digital converters. These devices have three inputs and a 3-state output [chip select (CS), input-output clock (I/O CLOCK), address input (ADDRESS), and data output (DATA OUT)] that provide a direct 4-wire interface to the serial port of a host processor. These devices allow high-speed data transfers from the host.

In addition to a high-speed A/D converter and versatile control capability, these devices have an on-chip 14-channel multiplexer that can select any one of 11 analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic. At the end of A/D conversion, the end-of-conversion (EOC) output goes high to indicate that conversion is complete. The converter incorporated in the devices features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating free-air temperature range.

filter

查找其他精密 ADC

下载