Number of channels (#) 1 Total supply voltage (Max) (+5V=5, +/-5V=10) 16 Total supply voltage (Min) (+5V=5, +/-5V=10) 4.5 Rail-to-rail In to V- GBW (Typ) (MHz) 10 Slew rate (Typ) (V/us) 16 Vos (offset voltage @ 25 C) (Max) (mV) 1.4 Iq per channel (Typ) (mA) 1.8 Vn at 1 kHz (Typ) (nV/rtHz) 8.5 Rating Catalog Operating temperature range (C) -40 to 125 Offset drift (Typ) (uV/C) 1.2 Features Input bias current (Max) (pA) 50 CMRR (Typ) (dB) 110 Output current (Typ) (mA) 100 Architecture CMOS open-in-new 查找其它 通用 运算放大器


PDIP (P) 8 93 mm² 9.81 x 9.43 SOIC (D) 8 19 mm² 3.91 x 4.9 SOIC (D) 8 19 mm² 4.9 x 3.9 open-in-new 查找其它 通用 运算放大器


  • Wide Bandwidth: 10 MHz
  • High Output Drive:
    • IOH: 57 mA at VDD – 1.5 V
    • IOL: 55 mA at 0.5 V
  • High Slew Rate:
    • SR+: 16 V/µs
    • SR–: 19 V/µs
  • Wide Supply Range: 4.5 V to 16 V
  • Supply Current: 1.9 mA/Channel
  • Ultralow Power Shutdown Mode:
    • IDD: 125 µA/Channel
  • Low Input Noise Voltage: 8.5 nV√Hz
  • Input Offset Voltage: 60 µV
  • Ultra-Small Packages:
    • 8- or 10-Pin MSOP (TLC080/1/2/3)

PowerPAD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.

open-in-new 查找其它 通用 运算放大器


The first members of TI’s new BiMOS general-purpose operational amplifier family are the TLC08x. The BiMOS family concept is simple: provide an upgrade path for BiFET users who are moving away from dual-supply to single-supply systems and demand higher ac and dc performance. With performance rated from 4.5 V to 16 V across commercial (0°C to 70°C) and an extended industrial temperature range (–40°C to 125°C), BiMOS suits a wide range of audio, automotive, industrial, and instrumentation applications. Familiar features like offset nulling pins, and new features like MSOP PowerPAD™ packages and shutdown modes, enable higher levels of performance in a variety of applications.

Developed in TI’s patented LBC3 BiCMOS process, the new BiMOS amplifiers combine a very high input impedance, low-noise CMOS front end with a high-drive bipolar output stage, thus providing the optimum performance features of both. AC performance improvements over the TL08x BiFET predecessors include a bandwidth of 10 MHz (an increase of 300%) and voltage noise of 8.5 nV/√Hz (an improvement of 60%). DC improvements include an ensured VICR that includes ground, a factor of 4 reduction in input offset voltage down to 1.5 mV (maximum) in the standard grade, and a power supply rejection improvement of greater than 40 dB to 130 dB. Added to this list of impressive features is the ability to drive ±50-mA loads comfortably from an ultrasmall-footprint MSOP PowerPAD package, which positions the TLC08x as the ideal high-performance general-purpose operational amplifier family.

For the most current package and ordering information, see the Package Option Addendum at the end of this data sheet, or see the TI web site at www.ti.com.

open-in-new 查找其它 通用 运算放大器


= 特色
未找到结果。请清除搜索,并重试。 查看所有 7
类型 标题 下载最新的英文版本 发布
* 数据表 TLC08x - Family of Wide-Bandwidth High-Output-Drive Single Supply Op Amps 数据表 2011年 12月 7日
技术文章 What is an op amp? 2020年 1月 21日
技术文章 Designing tiny microphone circuits with the industry’s smallest op amp 2018年 4月 12日
技术文章 How to lay out a PCB for high-performance, low-side current-sensing designs 2018年 2月 6日
解决方案指南 The Signal e-book: A compendium of blog posts on op amp design topics. 下载英文版本 2018年 1月 31日
技术文章 Low-side current sensing for high-performance cost-sensitive applications 2018年 1月 22日
应用手册 TLC08x and TLC08xA EMI Immunity Performance 2013年 8月 19日




评估板 下载
document-generic 用户指南

TI 精密放大器快速入门套件凭借六个运算放大器样片和用于表面贴装 IC 原型设计的评估模块,简化了运算放大器的选择、设计和评估过程。该套件是您设计放大器的完美起点。

您可能还对 TI 高精度实验室(业界首个面向模拟工程师的综合性网上课堂)感兴趣。浏览课程



  • 六个样片:三个低功耗、低电压放大器和三个低功耗、宽电源放大器。请参见下表,以了解完整的列表。
  • 用于表面贴装 IC 原型设计的 DIP 适配器评估模块 (DIP-ADAPTER-EVM)。EVM 支持以下封装类型:D 或 U (SOIC-8)、PW (TSSOP-8)、DGK (MSOP-8)、DBV(SOT23-6、SOT23-5 和 SOT23-3)、DCK(SC70-6 和 SC70-5)和 DRL (SOT563-6)。


器件 Iq
低电压 OPA31x 系列:通过微功耗和 RRIO 实现一流的带宽功耗比
OPA313 0.06 1 0.5 2.5 25 1.8 至 5.5
OPA314 0.19 3 1.5 2.5 14 1.8 至 5.5
OPA316 0.5 10 6 2.5 11 1.8 至 5.5
宽电源 OPA17x 系列:微封装、微功耗和 RRO
OPA170 0.145 1.2 0.4 1.8 19 2.7 至 36
OPA171 0.595 3 (...)
评估板 下载
DIP 适配器评估模块
document-generic 用户指南

Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.

The (...)

  • Simplifies prototyping of SMT IC’s
  • Supports 6 common package types
  • Low Cost
评估板 下载
document-generic 用户指南

The Universal OPAMPEVM is a series of general purpose blank circuit boards that simplify prototyping circuits for a variety of IC package types. The evaluation module board design allows many different circuits to be constructed easily and quickly. Five models are offered with each targeted for (...)


仿真工具 下载
document-generic 用户指南 document-generic 下载英文版本 (Rev.A)
计算工具 下载
ANALOG-ENGINEER-CALC — 模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面,其中显示各种常见计算的列表(从使用反馈电阻器设置运算放大器增益到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件)。除了可用作单独的工具之外,该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。
  • 通过模数转换器 (ADC) 和数模转换器 (DAC) 加快电路设计
    • 噪声计算
    • 常见单位转换
  • 解决常见的放大器电路设计问题
    • 使用标准电阻器进行增益选择
    • 滤波器配置
    • 常见放大器配置的总噪声
  • 执行 PCB 寄生计算(例如 R、L 和 C)
  • 查找常见传感器的传感器输出值(例如 RTD、热电偶)
  • 解决常见无源电路问题(例如使用无源组件的分压器)


封装 引脚 下载
PDIP (P) 8 视图选项
SOIC (D) 8 视图选项



可获得 TI E2E™ 论坛的工程师技术支持

所有内容均由 TI 和社区网友按“原样”提供,并不构成 TI 规范。参阅使用条款

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持