返回页首

产品详细信息

参数

Number of series cells 1, 2, 3, 4 Charge current (Max) (A) 8.128 Operating Vin (Max) (V) 24 Cell chemistry Lead Acid, Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4, NiCd, NiMH Battery charge voltage (Min) (V) 1.024 Battery charge voltage (Max) (V) 19.2 Absolute Vin (safety rating) (Max) ((V)) 30 Control topology Switch-Mode Buck-boost Control interface SMBus Features BAT temp thermistor monitoring (hot/cold profile), IC thermal regulation, ICO (Input Current Optimization), IINDPM (Input current limit), Input OVP, Integrated ADC, Power Path, VINDPM (Input voltage threshold to maximize adaptor power) Operating Vin (Min) (V) 3.5 Rating Catalog open-in-new 查找其它 电池充电器IC

封装|引脚|尺寸

WQFN (RSN) 32 16 mm² 4 x 4 open-in-new 查找其它 电池充电器IC

特性

  • Charge 1- to 4-Cell Battery From Wide Range of Input Sources
    • 3.5-V to 24-V Input Operating Voltage
    • Supports USB2.0, USB 3.0, USB 3.1 (Type C), and USB_PD Input Current Settings
    • Seamless Transition Between Buck and Boost Operation
    • Input current and Voltage Regulation (IDPM and VDPM) Against Source Overload
  • Power/Current Monitor for CPU Throttling
    • Comprehensive PROCHOT Profile, IMVP8 Compliant
    • Input and Battery Current Monitor
    • System Power Monitor, IMVP8 Compliant
  • Narrow-VDC (NVDC) Power Path Management
    • Instant-On With No Battery or Deeply Discharged Battery
    • Battery Supplements System When Adapter is Fully-Loaded
    • Ideal Diode Operation in Supplement Mode
  • 800-kHz or 1.2-MHz Programmable Switching Frequency for 1-µH to 3.3-µH Inductor
  • Host Control Interface for Flexible System Configuration
    • SMBus Port for Optimal System Performance and Status Reporting
    • Hardware Pin to Set Input Current Limit Without EC Control
  • Integrated ADC to Monitor Voltage, Current and Power
  • High Accuracy Regulation and Monitor
    • ±0.5% Charge Voltage Regulation
    • ±2% Input/Charge Current Regulation
    • ±2% Input/Charge Current Monitor
    • ±5% Power Monitor
  • Safety
    • Thermal Shutdown
    • Input, System, Battery Overvoltage Protection
    • MOSFET Inductor Overcurrent Protection
  • Low Battery Quiescent Current
  • Input Current Optimizer (ICO) to Extract Max Input Power
  • Charge any Battery Chemistry: Li+, LiFePO4, NiCd, NiMH, Lead Acid
  • Package: 32-Pin 4 × 4 WQFN
open-in-new 查找其它 电池充电器IC

描述

The bq25708 is a synchronous NVDC battery buck-boost charge controller, offering low component count, high efficiency solution for space-constraint, multi-chemistry battery charging applications.

The NVDC-1 configuration allows the system to be regulated at battery voltage, but not drop below system minimum voltage. The system keeps operating even when the battery is completely discharged or removed. When load power exceeds input source rating, the battery goes into supplement mode and prevents the system from crashing.

The bq25708 charges battery from a wide range of input sources including USB adapter, high voltage USB PD sources and traditional adapters.

During power up, the charger sets converter to buck, boost or buck-boost configuration based on input source and battery conditions. The charger automatically transits among buck, boost and buck-boost configuration without host control.

The bq25708 monitors adapter current, battery current and system power. The flexibly programmed PROCHOT output goes directly to CPU for throttle back when needed.

open-in-new 查找其它 电池充电器IC
下载

技术文档

star = TI 精选相关文档
未找到结果。请清除搜索,并重试。
查看所有 4
类型 标题 下载最新的英文版本 日期
* 数据表 bq25708 SMBus Multi-Chemistry Battery Buck-Boost Charge Controller With System Power Monitor and Processor Hot Monitor 数据表 2017年 11月 14日
技术文章 When to use rechargeable batteries in small battery applications 2019年 10月 1日
技术文章 Should I use a linear charger or a switching charger? 2015年 10月 31日
技术文章 Summertime and the livin' is easy 2014年 6月 20日

设计与开发

有关其他条款或所需资源,请点击下面的任何链接来查看详情页面。

软件开发

应用软件和框架 下载
Battery Management Studio (bqStudio) 软件套件
BQSTUDIO Battery Management Studio (bqStudio) 提供一整套稳健的工具来帮助您评估、配置、测试 TI 电池管理产品以及利用其进行设计或以其他方式对其加以利用。这包括提供对寄存器和数据内存的完全访问,其中包括支持实时查看、绘制和记录轻松连接以发送命令、控制低级通信和 I/O,以及自动和指导支持配置、校准、执行学习周期以及生成有用的文件以将器件投入生产。此外,Battery Management Studio 还为监测计开发套件 (bq27GDK000EVM) 提供自动化和脚本支持。
特性
  • 对 EV2300 和 EV2400 的支持
  • 用于监控基本寄存器的实时监测计仪表板
  • 完整的寄存器访问和记录
  • 完整的数据内存访问和记录
  • 产品配置和监控工具
  • 产品配置的导入和导出
  • 为器件的目标平台自定义器件的强大指导
  • 校准和测试自动化
  • 为目标生产环境导出 FS 文件
  • 用于自动化的监测计开发套件控制

CAD/CAE 符号

封装 引脚 下载
QFN (RSN) 32 了解详情

订购与质量

包含信息:
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/FIT 估算
  • 材料成分
  • 认证摘要
  • 持续可靠性监测

推荐产品的参数、评估模块或参考设计可能与此 TI 产品相关

支持与培训

可获得 TI E2E™ 论坛的工程师技术支持

所有内容均由 TI 和社区网友按“原样”提供,并不构成 TI 规范。参阅使用条款

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持

视频