主页 电池管理 IC 电池电量监测
主页
电池管理 IC
电池电量监测

BQ2052

正在供货

具有高速单总线 (HDQ) 接口、3 种可编程 LED 模式的锂原电池电量监测计

立即订购
数据表

BQ2052

正在供货
数据表 立即订购

产品详情

Cell chemistry Primary Lithium Number of series cells 2-4 Cells Communication interface HDQ Battery capacity (min) (mAh) 1000 Battery capacity (max) (mAh) 12000 Implementation Pack External capacity indication LED Features Coulomb Counter Operating temperature range (°C) -20 to 70 Rating Catalog
Cell chemistry Primary Lithium Number of series cells 2-4 Cells Communication interface HDQ Battery capacity (min) (mAh) 1000 Battery capacity (max) (mAh) 12000 Implementation Pack External capacity indication LED Features Coulomb Counter Operating temperature range (°C) -20 to 70 Rating Catalog
SOIC (D) 16 59.4 mm² 9.9 x 6
  • Accurate measurement of available capacity in Lithium primary batteries such as Lithium Sulphur Dioxide and Lithium Manganese Dioxide
  • Provides a low-cost battery monitor solution for pack integration
    • Complete circuit can fit less than 1 square inch of PCB space
    • Low operating current
    • Less than 100nA of data retention current
  • Single-wire communication interface (HDQ bus) for critical battery parameters
  • Communicates remaining capacity with direct drive of LEDs in 3 selectable modes
  • Measurements automatically compensated for discharge rate and temperature
  • 16-pin narrow SOIC
  • Accurate measurement of available capacity in Lithium primary batteries such as Lithium Sulphur Dioxide and Lithium Manganese Dioxide
  • Provides a low-cost battery monitor solution for pack integration
    • Complete circuit can fit less than 1 square inch of PCB space
    • Low operating current
    • Less than 100nA of data retention current
  • Single-wire communication interface (HDQ bus) for critical battery parameters
  • Communicates remaining capacity with direct drive of LEDs in 3 selectable modes
  • Measurements automatically compensated for discharge rate and temperature
  • 16-pin narrow SOIC

The bq2052 Lithium Primary Gas Gauge IC is intended for battery-pack or in system installation to maintain an accurate record of available battery capacity. The IC monitors a voltage drop across a sense resistor connected in series with the cells to determine discharge activity of the battery. The bq2052 applies compensations for battery temperature and discharge rate to the available charge counter to provide available capacity information across a wide range of operating conditions.

Compensated available capacity may be directly indicated using an LED display. The LED display is programmable and can be configured as two, four, or five segments. These segments are used to depict available battery capacity. The bq2052 supports a single-wire serial communications link to an external microcontroller. The link allows the microcontroller to read and write the internal registers of the bq2052. The internal registers include available battery capacity, voltage, temperature, current, and battery status. The controller may also overwrite some of the bq2052 gas gauge data registers.

The bq2052 can operate from the batteries in the pack. The REF output and an external FET provide a simple, inexpensive voltage regulator to supply power to the circuit from the cells.

The bq2052 Lithium Primary Gas Gauge IC is intended for battery-pack or in system installation to maintain an accurate record of available battery capacity. The IC monitors a voltage drop across a sense resistor connected in series with the cells to determine discharge activity of the battery. The bq2052 applies compensations for battery temperature and discharge rate to the available charge counter to provide available capacity information across a wide range of operating conditions.

Compensated available capacity may be directly indicated using an LED display. The LED display is programmable and can be configured as two, four, or five segments. These segments are used to depict available battery capacity. The bq2052 supports a single-wire serial communications link to an external microcontroller. The link allows the microcontroller to read and write the internal registers of the bq2052. The internal registers include available battery capacity, voltage, temperature, current, and battery status. The controller may also overwrite some of the bq2052 gas gauge data registers.

The bq2052 can operate from the batteries in the pack. The REF output and an external FET provide a simple, inexpensive voltage regulator to supply power to the circuit from the cells.
open-in-new 查找其他 电池电量监测
下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 2
类型 标题 下载最新的英语版本 日期
* 数据表 Gas Gauge IC for Lithium Primary Cells 数据表 1999年 9月 5日
应用手册 HDQ Communication Basics for TI Battery Monitor ICs 2001年 5月 16日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

封装 引脚 下载
SOIC (D) 16 查看选项
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

支持和培训

视频