• Menu
  • Product
  • Email
  • PDF
  • Order now
  • Translate Voltages for I2C

    • SCEA116 June   2022 LSF0102 , LSF0102-Q1 , TXS0102 , TXS0102-Q1

       

  • CONTENTS
  • SEARCH
  • Translate Voltages for I2C
  1.   1
  2.   Design Considerations
  3.   Recommended Parts
  4. IMPORTANT NOTICE
search No matches found.
  • Full reading width
    • Full reading width
    • Comfortable reading width
    • Expanded reading width
  • Card for each section
  • Card with all content
PRODUCT OVERVIEW

Translate Voltages for I2C

GUID-499B46D0-6B2B-4A4C-BE48-69187715A7B5-low.gif Example of Using Voltage Translation With an I2C Communication Bus

Design Considerations

  • Typical data rates can range from 100 kpbs – 3.4 Mbps
  • Certain I2C modes have minimum rise time requirements that may be violated due to the edge-rate acceleration feature in the TXS family
  • Enable communication when devices have mismatched logic voltage levels.
  • Prevent damage to devices that cannot support higher voltage inputs.
  • Improve data rates over discrete translation solutions.
  • [FAQ] Why are the TXS01xx VIH/VIL specifications so stringent?
  • Need additional assistance? Ask our engineers a question on the TI E2E™ Logic Support Forum.

Recommended Parts

Part Number AEC-Q100 Qualified Voltage Translation Range Features
LSF0102 0.95 V – 5 V

Over-voltage tolerant I/O

Low RON for less signal distortion

LSF0102-Q1 ✓
TXS0102 1.65 V – 5.5 V

Edge-rate acceleration

Supports Partial-Power-Down applications

Integrated pull-up resistors

TXS0102-Q1 ✓

For more devices, browse through the online parametric tool where you can sort by desired voltage, channel numbers, and other features.

IMPORTANT NOTICE AND DISCLAIMER

TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.

These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources.

TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products.

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 

Copyright © 2022, Texas Instruments Incorporated

Texas Instruments

© Copyright 1995-2025 Texas Instruments Incorporated. All rights reserved.
Submit documentation feedback | IMPORTANT NOTICE | Trademarks | Privacy policy | Cookie policy | Terms of use | Terms of sale