ZHCSSC1B June   2015  – December 2024 LV14240

PRODUCTION DATA  

  1.   1
  2. 1 特性
  3. 2 应用
  4. 3 说明
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Switching Characteristics
    7. 5.7 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1  Fixed Frequency Peak Current Mode Control
      2. 6.3.2  Slope Compensation
      3. 6.3.3  Low Dropout Operation and Bootstrap Voltage (BOOT)
      4. 6.3.4  Adjustable Output Voltage
      5. 6.3.5  Enable and Adjustable Undervoltage Lockout
      6. 6.3.6  External Soft Start
      7. 6.3.7  Switching Frequency and Synchronization (RT/SYNC)
      8. 6.3.8  Overcurrent and Short-Circuit Protection
      9. 6.3.9  Overvoltage Protection
      10. 6.3.10 Thermal Shutdown
    4. 6.4 Device Functional Modes
      1. 6.4.1 Pulse Skipping Mode
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
        1. 7.2.2.1 Output Voltage Set-Point
        2. 7.2.2.2 Switching Frequency
        3. 7.2.2.3 Output Inductor Selection
        4. 7.2.2.4 Output Capacitor Selection
        5. 7.2.2.5 Schottky Diode Selection
        6. 7.2.2.6 Input Capacitor Selection
        7. 7.2.2.7 Bootstrap Capacitor Selection
        8. 7.2.2.8 Soft-Start Capacitor Selection
      3. 7.2.3 Application Curves
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
      2. 7.4.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 接收文档更新通知
    2. 8.2 支持资源
    3. 8.3 Trademarks
    4. 8.4 静电放电警告
    5. 8.5 术语表
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

9 Revision History

Changes from Revision A (July 2023) to Revision B (December 2024)

  • Changed the MAX voltage rating for BOOT to SW from 6.5V to 5.5V, and FB to GND from 7V to 5.5VGo
  • Changed thermal metrics of DDA package, RθJA from 42.5 to 43.2, ψJT from 9.9 to 5.2, ψJB 25.4 to 16.4, RθJC(top) from 56.1 to 52.1, RθJC(bot) from 3.8 to 7.8, RθJB from 25.5 to 16.4Go
  • Deleted the test condition of " BOOT to SW = 5.8 V " on parameter RDS_ON Go
  • Deleted the test condition of " BOOT to SW = 5.8 V " on parameter TON_MIN Go

Changes from Revision * (June 2015) to Revision A (July 2023)