SNVU799 March 2022 LP87523-Q1

1 Introduction

This technical reference manual can be used as a reference for the LP875230C-Q1 default register bits after OTP memory download. This technical reference manual does not provide information about the electrical characteristics, external components, package, or the functionality of the device. For this information and the full register map, refer to the LP8752x-Q1 Four-Phase 10-A Buck Converter With Integrated Switches data sheet

Table 1-1 lists the main OTP settings for power rails. Table 2-1 lists the register bits loaded from OTP memory.

Table 1-1 Main OTP Settings for Power Rails

Description		Bit Name	LP875230CRNFRQ1 Value
Device identification	OTP configuration	OTP_ID	7Eh
BUCK0, BUCK1 (2-phase operation)	Output voltage	BUCK0_VSET	850 mV
	Enable, EN pin, or I²C register	EN_BUCK0, EN_PIN_CTRL0, BUCK0_EN_PIN_SELECT	EN1
	Force PWM	BUCK0_FPWM	Yes
	Force multiphase	BUCK0_FPWM_MP	Yes
	Peak current limit per phase	N/A	4 A
	Maximum load current	N/A	6 A
	Slew rate	N/A	3.8 mV/µs
BUCK2	Output voltage	BUCK2_VSET	1100 mV
	Enable, EN pin, or I²C register	EN_BUCK2, EN_PIN_CTRL2, BUCK2_EN_PIN_SELECT	EN1
	Force PWM	BUCK2_FPWM	Yes
	Peak current limit	N/A	3 A
	Maximum load current	N/A	2 A
	Slew rate	N/A	3.8 mV/µs
BUCK3	Output voltage	BUCK3_VSET	1800 mV
	Enable, EN pin, or I²C register	EN_BUCK3, EN_PIN_CTRL3, BUCK3_EN_PIN_SELECT	EN1
	Force PWM	BUCK3_FPWM	Yes
	Peak current limit	N/A	3 A
	Maximum load current	N/A	2 A
	Slew rate	N/A	3.8 mV/µs
Switching frequency		N/A	2 MHz
I²C address		N/A	61h

Note:

The maximum total output capacitance (local + POL) per phase (BUCK0, BUCK1, BUCK2, and BUCK3) depends on the slew rate setting. Check the data sheet for the allowed capacitance value.