SLVUCU4 February   2026

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  6. 2Hardware
    1. 2.1 Setup
      1. 2.1.1 Connector Descriptions
      2. 2.1.2 Hardware Setup
      3. 2.1.3 Warnings and Caution
  7. 3Implementation Results
    1. 3.1 TPS62893EVM-013 Test Results
    2. 3.2 Modifications
      1. 3.2.1 Input and Output Capacitors
      2. 3.2.2 Output Voltage Setting
      3. 3.2.3 Control Loop Compensation
      4. 3.2.4 I2C Interface
  8. 4Hardware Design Files
    1. 4.1 Schematic
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  9. 5Additional Information
    1. 5.1 Trademarks

PCB Layout

This section provides the TPS62893EVM-013 board layout. The Gerber files are available on the TPS62893EVM-013 tool page.

TPS62893EVM-013 Top Layer -
            ComponentsFigure 4-2 Top Layer - Components
TPS62893EVM-013 Layer 2Figure 4-4 Layer 2
TPS62893EVM-013 Layer 4Figure 4-6 Layer 4
TPS62893EVM-013 Layer 6Figure 4-8 Layer 6
TPS62893EVM-013 Layer 8Figure 4-10 Layer 8
TPS62893EVM-013 Bottom
            LayerFigure 4-12 Bottom Layer
TPS62893EVM-013 Top
            LayerFigure 4-3 Top Layer
TPS62893EVM-013 Layer 3Figure 4-5 Layer 3
TPS62893EVM-013 Layer 5Figure 4-7 Layer 5
TPS62893EVM-013 Layer 7Figure 4-9 Layer 7
TPS62893EVM-013 Layer 9Figure 4-11 Layer 9