SLVUBW6A May   2020  – December 2020 TPS61288

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Performance Specification
    2. 1.2 Modification
  3. 2Connector, Test Point and Jumper Descriptions
    1. 2.1 Connector and Test Point Descriptions
    2. 2.2 Jumper Configuration
      1.      JP1 (VIN Control)
      2. 2.2.1 JP2 (Enable)
  4. 3Schematic, Bill of Materials, and Board Layout
    1. 3.1 Schematic
    2. 3.2 Bill of Materials
    3. 3.3 Board Layout
  5. 4Revision History

3.3 Board Layout

The TPS61288EVM board is a 4-layer PCB. The top and bottom layers copper thickness is 2-oz. The two inner layers copper thickness is 1-oz. Figure 3-2 and Figure 3-5 show the top view and bottom view, respectively. Figure 3-3 and Figure 3-4 show the inner layer 1 and inner layer 2, respectively.

GUID-20201123-CA0I-5FX8-8F5X-R0PGL4P4SXBT-low.gif Figure 3-2 TPS61288EVM-064 Top-Side Layout
GUID-20201123-CA0I-KQTP-3MSH-JT4WFK3DN1WK-low.gif Figure 3-3 TPS61288EVM-064 Inner Layer1 Layout
GUID-20201123-CA0I-SVRJ-BGJT-ZPWBRS059ZHK-low.gif Figure 3-4 TPS61288EVM-064 Inner Layer2 Layout
GUID-20201123-CA0I-BBBG-01Z9-J1MXRNKRSLHQ-low.gif Figure 3-5 TPS61288EVM-064 Bottom-Side Layout